|
Marine Ultimate Maintenance Kit - Deluxe
This all-inclusive package offers the tools needed for routine boat upkeep.
What’s Included?
6' Telescoping Extension Handle
6" Soft Deck Brush
Deluxe "Water Sprite" Mop
3-in-1 Boat Hook
10" Curved Adapter
PVA Towel
12" Stainless Squeegee
Snap-Stick 0.45-oz Tube
|
149.29 |
|
|
MARINE MAINTENANCE KIT
Intermediate Kit
6' Telescoping Extension Handle
6" Soft Deck Brush
Soft 'N' Thirsty
3-in-1 Boat Hook
PVA Towel
10" Curved Adapter
Snap-Stick .45oz Tube
|
209.98 |
|
|
Ultra Safety Systems Bilge Switch Ultimate JR 24/32 VOLT
ULTRA PUMPSWITCH JR
Automatic bilge pump switch.
6 1/4 inch high and 2 1/2 inch diameter (1 1/4 inch ON/OFF differential).
24/32 Volts at 10 Amps (30 Amp relay)
5 year warranty
|
185.25 |
|
|
MARINE MAINTENANCE KIT
Basic Kit
6' Telescoping Extension Handle
6" Soft Deck Brush
Cotton String Mop
3-in-1 Boat Hook
Snap-Stick .45oz Tube
|
143.98 |
|
|
Maintenance Kit for 30mm Shaft & 1-3/4" Stern Tube
As with any rubber or silicone hose below the waterline, the PSS bellows must be inspected regularly for any signs of wear, aging, or chemical deterioration. PYI recommends that the bellows be replaced once every 6 years. During the bellows replacement, it is also recommended that the O-rings and set screws be replaced, as well as the hose clamps. PYI includes all the necessary replacement parts in the PSS Maintenance Kit.
What's Included:
Bellows (1)
Nitrile O-rings (2)
Set screws (5)
Hose clamps (4)
Tube of Thread Lock (1)
Allen key (1)
Dimensions:
Shaft Diameter: 30mm
Stern Tube Diameter: 1-3/4 in. to 1-7/8 in.
What is the recommended maintenance schedule for the PSS Shaft Seal?
PYI recommends that the bellows be replaced once every 6 years. During the bellows replacement, it is also recommended that the O-rings and set screws in the stainless steel rotor be replaced and the hose clamps. Under most circumstances, the carbon stator and the stainless steel rotor will not need to be replaced.
|
83.26 |
|
|
Jabsco 56584-0004B Ultimate Spares Kit
|
747.02 |
|
|
Brake Maintenance Kit
Just like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again.
Kit Includes:
(2) Bronze Brake Legs with Brake Pads
(1) Cotter Pin
(1) Stainless Steel Washer
(1) Nylon Bushing
(1) Removal & Installation Instructions
|
93.60 |
|
|
Winch Maintenance Kit
All in one kit to protect the interior mechanism of your winch from freshwater condensation and salt water corrosion.
In the Box:
Standard pawl springs (small) x 10
1" Brush x 1
Winch Race lube (55 ml) x 1
Grease (100 g) x 1
Self sal bag x 1
Instruction manual
*Sold as an Individual
|
47.65 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1" SHAFT 1 1/2" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings, five (5) set screws, four (4) new hose clamps and an allen key.
|
83.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1" SHAFT 1 3/4" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
83.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1" SHAFT 2" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
83.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1" SHAFT 2 1/4" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
83.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1 1/8" SHAFT 1 1/2" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
83.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1 1/8" SHAFT 1 3/4" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
83.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1 1/4" SHAFT 1 3/4" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
108.00 |
|