Tuthill 4108-V-CC-A-7 Pump Tang Shaft Gear 1"
Tuthill 4108V-CC-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 13 GPM 4108 Series. Cast Iron Construction NO motor. Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field). COUNTER Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.
Features
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 40-70 PSI. Other PSI ranges available.
Shaft Seal :Mechanical Seal Viton
Port Size: Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT.
Tuthill 2LEV-CC-A-7 Pump Tang Drive
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
Has Internal Relief Valve
Relief valve is set at 55 PSI (can be adjusted in field)
Counter-clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
Tuthill 4105V-CC-A-7 Pump Tang Shaft Viton
Cast Iron Rotary Gear Pump
Pump End Only 5.6 GPM
4105 Series Pump
Cast Iron Construction
Has Internal Relief Valve
Relief valve is set at 55 PSI (can be adjusted in field)
COUNTER Clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Tuthill 1LEV-CC-7 Pump 3.2 Gpm 1/2" Ports
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 55-120 PSI.
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
Tuthill 1RFD-A2 Lubrication & Hydraulic Pump
Cartridge Lubrication/Hydraulic Pump
Pump End Only
Cast Iron Construction
Internal and External Ports
Tang Shaft
Inlet Port is 1/2 Inch NPT
Discharge Port is 1/2 Inch NPT
BURKS 20522-7, Repair Kit for All CS7M Series Pumps
Repair Kit for All CS7M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.
Tuthill 1LEK-C-7 Pump 3.2Gpm with Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction NO motor
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
Tuthill 2LE-7 Pump Viton
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
Tuthill 2LEK-C-7 Pump 6.2Gpm 1/2"Ports
Cast Iron Rotary Gear Pump. Pump End Only.
L Series Pump
Cast Iron Construction
Clockwise rotation only (from shaft end view).
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
Tuthill 3C2EN-V-C-7 Pump 18Gpm 1 1/4 Ports
Cast Iron Rotary Gear Pump
Pump End Only 17 GPM
C Series Pump
Cast Iron Construction
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1-1/4 inch NPT
Discharge Port is 1-1/4 inch NPT
Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
NO motor
Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field)
Clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU