Micropump GC-M23.JF5S.E Pump Head 56C Mount Micropump L18039 GC-M23.JF5S.E Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. L18039 constructed of Base Material 316SS, Gear Material PEEK (carbon fiber/ptfe) and Shaft Material 316SS. Pump Series: GC Series Ports/Fittings: 3/8-18 (F) NPT Side Port Min Speed (RPM): 500 Max Speed (RPM): 4000 Max Pressure (psi): 1500 Min Temperature (°C): -29 Max Temperature (°C): 177 Max Diff. Pressure (psi): 125 Displacement (ml/rev): 0.8100000000000001 Design: Standard Design Gear Set: 0.350/2/20 (0.81 ml/rev) Gear Material: PEEK (carbon fiber/ptfe) Static Seals: TEV (PTFE encap Viton®) Base Materials: 316SS Drive Mount: NEMA 56C Bypass: No Driven: Ferrite Driving Magnet: Ferrite High System Pressure: No Bushings: PEEK Shafts: 316SS Gear Trim: None Model: GC-M23.JF5S.E

Micropump GC-M23-JDS-E-N3 Gear Pumphead Micropump L21600 GC-M23.JDS.E-N3 Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. L21600 constructed of Base Material 316SS, Gear Material PEEK (carbon fiber/ptfe) and Shaft Material 316SS. Pump Series: GC Series Ports/Fittings: 3/8-18 (F) NPT Side Port Min Speed (RPM): 500 Max Speed (RPM): 4000 Max Pressure (psi): 1500 Min Temperature (°C): -46 Max Temperature (°C): 149 Max Diff. Pressure (psi): 125 Displacement (ml/rev): 0.8100000000000001 Design: Standard Design Gear Set: 0.350/2/20 (0.81 ml/rev) Gear Material: PEEK (carbon fiber/ptfe) Static Seals: EP Base Materials: 316SS Drive Mount: NEMA 56C Bypass: No Driven: Ferrite Driving Magnet: NdFeB High System Pressure: No Bushings: PEEK Shafts: 316SS Gear Trim: None Model: GC-M23.JDS.E-N3

Micropump S/K GC-M23.JDS.0 For GC-M23.Jds

Micropump GC-M25.PVS.E Pump Head 56C Mount Micropump 81376 GC-M25.PVS.E Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81376 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS. Pump Series: GC Series Ports/Fittings: 3/8-18 (F) NPT Side Port Min Speed (RPM): 500 Max Speed (RPM): 4000 Max Pressure (psi): 1500 Min Temperature (°C): -29 Max Temperature (°C): 176.666666666667 Max Diff. Pressure (psi): 75 Displacement (ml/rev): 1.82 Design: Standard Design Gear Set: 0.750/2/20 (1.82 ml/rev) Gear Material: PPS (carbon fiber/ptfe) Static Seals: Viton® Base Materials316SS Drive Mount: NEMA 56C Bypass: No Driven: Ferrite Driving Magnet: Ferrite High System Pressure: No Bushings: PPS Shafts: 316SS Gear Trim: None Model: GC-M25.PVS.E

Micropump GC-M35.PVS.E Pump Head 56C Mount Micropump 81377 GC Series Pumphead with Port/fittings 3/8-18 (F) NPT Side Port, Max Speed 4000 RPM, Max Pressure 1500 psi and Max Temp 176.666666666667 (C). Micropump GC-M35.PVS.E Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81377 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS. Pump Series: GC Series Ports/Fittings: 3/8-18 (F) NPT Side Port Min Speed (RPM): 500 Max Speed (RPM): 4000 Max Pressure (psi): 1500 Min Temperature (°C): -29 Max Temperature (°C): 176.666666666667 Max Diff. Pressure (psi): 47.26027397260274 Displacement (ml/rev): 3.48 Design: Standard Design Gear Set: 0.750/3/20 (3.48 ml/rev) Gear Material: PPS (carbon fiber/ptfe) Static Seals: Viton® Base Materials: 316SS Drive Mount: NEMA 56C Bypass: No Driven: Ferrite Driving Magnet: Ferrite High System Pressure: No Bushings: PPS Shafts: 316SS Gear Trim: None Model: GC-M35.PVS.E

Micropump GC-M35.PF5S.E Pump Head 56C Mount Micropump GC-M35.PF5S.E Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. L18822 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS. Micropump L18822 GC Series Pumphead with Port/fittings 3/8-18 (F) NPT Side Port, Max Speed 4000 RPM, Max Pressure 1500 psi and Max Temp 177 (C). Pump Series: GC Series Ports/Fittings: 3/8-18 (F) NPT Side Port Min Speed (RPM): 500 Max Speed (RPM): 4000 Max Pressure (psi): 1500 Min Temperature (°C): -29 Max Temperature (°C): 177 Max Diff. Pressure (psi): 47.26027397260274 Displacement (ml/rev): 3.48 Design: Standard Design Gear Set: 0.750/3/20 (3.48 ml/rev) Gear Material: PPS (carbon fiber/ptfe) Static Seals: TEV (PTFE encap Viton®) Base Materials: 316SS Drive Mount: NEMA 56C Bypass: No Driven: Ferrite Driving Magnet: Ferrite High System Pressure: No Bushings: PPS Shafts: 316SS Gear Trim: None Model: GC-M35.PF5S.E

Micropump GC-M35.JF5S.E Pump Head 56C Mount Micropump L19381 GC-M35.JF5S.E Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. L19381 constructed of Base Material 316SS, Gear Material PEEK (carbon fiber/ptfe) and Shaft Material 316SS. The Micropump L19381 GC Series Pumphead with Port/fittings 3/8-18 (F) NPT Side Port, Max Speed 4000 RPM, Max Pressure 1500 psi and Max Temp 177 (C). Pump Series: GC Series Ports/Fittings: 3/8-18 (F) NPT Side Port Min Speed (RPM): 500 Max Speed (RPM): 4000 Max Pressure (psi): 1500 Min Temperature (°C): -46 Max Temperature (°C): 177 Max Diff. Pressure (psi): 47.26027397260274 Displacement (ml/rev): 3.48 Design: Standard Design Gear Set: 0.750/3/20 (3.48 ml/rev) Gear Material: PEEK (carbon fiber/ptfe) Static Seals: TEV (PTFE encap Viton®) Base Materials: 316SS Drive Mount: NEMA 56C Bypass: No Driven: Ferrite Driving Magnet: Ferrite High System Pressure: No Bushings: PEEK Shafts: 316SS  Gear Trim: None Model: GC-M35.JF5S.E

Micropump GC-M25.PVS.F Pump Head F Mount Micropump 81378 GC-M25.PVS.F Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81378 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS. Pump Series: GC Series Ports/Fittings: 3/8-18 (F) NPT Side Port Min Speed (RPM): 500 Max Speed (RPM): 4000 Max Pressure (psi): 1500 Min Temperature (°C): -29 Max Temperature (°C): 176.666666666667 Max Diff. Pressure (psi): 75 Displacement (ml/rev): 1.82 Design: Standard Design Gear Set: 0.750/2/20 (1.82 ml/rev) Gear Material: PPS (carbon fiber/ptfe) Static Seals: Viton® Base Materials: 316SS Drive Mount: MP Housing (220 Style) Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: PPS Shafts: 316SS Gear Trim: None Model: GC-M25.PVS.F

Micropump GC-M35.PVS.F Pump Head F Mount Micropump 81379 GC-M35.PVS.F Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81379 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS.

Micropump GC-M25KF5S0 L15785 Kit

Micropump S/K GC-M25.PF5/VS.0 For Gc-M25.Pf5S

Micropump S/K GC-M35.PF5/VS.0 For Gc-M35.Pf5

By now, the skipper in your life has probably dropped a few hints about holiday gifts. Was it the note left on the coffee pot about Articulated ABS Barrel Hinge foldable Aluminum Tubing? At first glance, one would have thought that the message was a reminder about being out of coffee filters. Then it comes back to you that there was a conversation in the car about GemLock Assembled Folding Struts.    Foldable aluminum tubing is one of the hottest trends in stainless steel hardware for marine canvas and solar panel frames. The tubing offers versatility in styling, high quality, and ease of use. https://www.clrmarine.com/462m4/manufacturers/g/gemini-marine.html   Back to your captain's holiday gift list. Was there a subtle hint, while you both were swimming off the boat, and your skipper showed concern that the transom ladder seemed a little short by a few steps? She would find getting out of the lake sooooo much easier if she didn't have to reach her foot up so far to the lowest step. She had also mentioned a discussion with other boat captains about the Extend Your Step, an easy-to-use boat boarding ladder extension. Several of her sailing buddies already have them and raved about the ease and portability. .   All of the products mentioned above are available at CLR Marine.com. How confident are the folks at CLR Marine about the Extend Your Step regarding ease in boarding and extending the ladder length? This product reflects the confidence and integrity of CLR Marine's owner, Chuck Reed. He invented the Extend Your Step! When shopping for the extending ladder, be sure to check out the Extend Your Step Three – a longer and non-moving version of the Extend Your Step! https://www.clrmarine.com/Boat-Boarding-Ladder-Extension   It's possibly time for your captain to give the best seat in the house – on your boat- an upgrade. There is no better place to watch the glint of the sun on the waves than in a stern perch seat. Stern rail seats are now available for older model boats, even pre-1993, and the seats are removable. https://www.clrmarine.com/sternperch-seats.html     Stocking Stuffers   Floatable key rings. If you are old enough to have keys, then you are old enough to lose keys. House keys, boat keys, car keys – when these fall into the drink and aren't retrievable, your boat outing takes a turn for the worse. Car key fobs are expensive to replace. Neon colored strong straps or carabiner clips offer added security against key loss. DryCASE Smartphone Case   The DryCASE waterproof cell phone case keeps your electronics protected, whether surfing, paddle boarding, or canoeing. The DryCASE uses vacuum seal technology to ensure a watertight seal every time. Best of all, you'll still be able to use your touch screen to text or make calls, and the crystal clear covering makes taking pictures a cinch. When you purchase the DryCASE you will also receive a small hand pump, neoprene armband, and a lanyard  $36.92. https://www.clrmarine.com/m4/45443—drycase-smartphone-case.html   RAM Mount AQUA BOX Medium RAM AQUA BOX® cases provide sealed enclosure and protection for your handheld devices. The clear, touch through screen allows you to view your electronics and use their function keys while in place. There is even a place for a small lock to serve as a theft deterrent. The AMPS hole pattern on the back of the box allows this enclosure to be attached to many RAM mounting bases and kits. Ideally suited to Motorcycles and ATV's, the AQUA BOX keeps your portable devices safe, dry, and accessible $36.49.   Scotty 130 Paddle Safety Leash   Paddles, rods, nets, gaffs, and many other items can be secured while in use with the Scotty Safety Leash. Features include two extra strong Scotty 1009 swivel snaps; super-strong Flex Coil cord allows for maximum unrestricted movement and stretches to approx. 6'. Unit Includes two figure eight securing straps $11.99. https://www.clrmarine.com/m4/37811--scotty-130-paddle-safety-leash-black.html Gifts under $30.00   Don't forget about covers for your water toys. The Dallas Manufacturing Co – Pedal Boat Cover will keep your pedal boat dry, dirt free, and protected from the sun when not in use. Features include 150 Denier Silver Polyester, fits both 3 and 5 Person Pedal Boats and is backed by a one year warranty $13.19.  https://www.clrmarine.com/m4/36879—dallas-manufacturing-co-pedal-boat-polyester-cover.html   Mustang Lil' Legends 70 Youth Vest -  Fluorescent Yellow-Green/Gray   Have guests arrived on your boat with a small young family member who needs a life vest? The Mustang Lil's Legends is a quality youth vest, and it never hurts to have a spare on board. It fits a child 50-90 pounds  $21.59.  https://www.clrmarine.com/m4/49897—mustang-lil-legends-70-youth-vest-50-90lbs-fluorescent-yellow-green-gray.html     Be good—Santa's watching. Stay healthy. Fair Winds. Smooth sailing.   To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com ______________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com     

From now until December 31st, 2011, enjoy FREE unlimited updates when you purchase Navionics Hotmaps Premium, Hotmaps Platinum, Fish'N Chip, Gold or Platinum Plus products. See our complete Navionics line at http://www.clrmarine.com/462m4/cartography-navionics.html   Otterbox has not released there new product yet. Our Distributor has 800 OTTERBOX DEFENDER SERIES APPLE IPOD TOUCH 4TH GENERATION on order and have 499 of those commited to customers at this time.  See all 225 Otterbox items at http://www.clrmarine.com/462m4/manufacturers/otterbox.html

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686