|
Headhunter XRS-124 X-CAL 12/24V Pump
X-Caliber – 12-24V DC Water Pressure Pump
Quiet, reliable, blasting water pressure. Combining advanced DC motor and control technology with a proven self-priming centrifugal pump, the X-caliber surges past the competition with a flood of features.
A built in microprocessor interfaced with a rugged ceramic temperature and pressure sensor provides variable speed operation, prevents dry running damage and ensures complete electrical protection.
Part#Description
XRS-124X-Caliber 12-24 VDC Saltwater Pressure System
Control Panel:
Program power and pressure settings via the integrated control panel. Four colored LED’s display current settings and alarm conditions.
Advanced Features:
Adjustable cut in pressure
Adjustable power setting
Operates on 12 or 24VDC
Over voltage protection
Under voltage protection
Over current protection
Anti-flooding protection
Dry run protection
Variable Speed
Rotating bracket
Product Details/Specifications:
Liquid Temp
32°F (0°c)-104°F (40°c)
Ambient Temp
32°F (0°c)-122°F (50°c)
Max Pressure 67 PSI (4.5 bar)
Max Flow 10 GPM (38 lpm)
Suction/Discharge 3/4” FPT (Optional metric adapter)
Weight 16lbs (7.2 kg)
Dimensions 15”(382mm)L 8”(203mm)W 7”(178mm)H
|
2422.73 |
|
|
Gianneschi ACB61E-24V Bronze 24V Self-Priming Pump
Gianneschi ACB61E-24V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.18KW (1/4 Horsepower), 3200 RPM, 24 Volts DC. Inlet Port is 1/2 Inch, Discharge Port is 1/2 Inch.
Applications for the ACB61E24V include fire fighting, oil and diesel, bilges, chain washing, and in pumping seawater as well as any fluids with high air content.
|
849.68 |
|
|
Gianneschi MAXI SUB 24V Submersible Pump 24V
Submersible Bilge Pump for seawater and grey water
Maxi Sub - 24volt
Voltage: 24 V
Power: 0,18 kW
Max flow: 180 L/min @ 2 m
Max head: 8m @ 30 L/min
Outlet: 1", female (vertical)
Stainless steel shaft (AISI 316) ; ABS open impeller
Diameter: 180 mm
Height: 290 mm
IP rating : IP68
|
888.68 |
|
|
Flojet 04300-505-24V Pump 24V 4.9/45 Pse Sw
This Flojet 04300-505-24v Diaphragm Pump runs on 24 Volts DC and has 5/8” Hose Barb Snap-In Ports. Open flow produces 4.9 gallons per minute with a 45psi switch. Made of Polypropylene, EPDM Valves and Santoprene Diaphragm.
|
275.00 |
|
|
Oberdorfer 406M Series Flexible Impeller Macerator
Pump Body: Bronze
Ports: Inlet: 1 1/2" Threads
Outlet 1" NPT or 1 1/2 Hose
Flow: 25 GPM Max
Pressure: 44 PSI Max, 100 feet of head
Impeller: Neoprene Standard, Buna Optional
Shaft Seal: Mechanical Seal Shaft: Stainless Steel
Motor / Drive: These Close coupled Rubber Impeller Pumps are mounted directly onto the electric motor without the use of a shaft coupling. This pump is coupled to standard motors with Nema C flange. It uses a motor adapter plate to accommodate the pump. We can supply additional motors and assemble for you.
Easy Impeller Replacement
Macerator Easily Replaced
Reversible Wear Plate.
Suction lifts of 15 ft. are possible when pump is fully primed.
Oberdorfer Flexible Impeller Macerator Pump, with 1HP, 24VDC, TEFC Motor
This item is 'build to order'. Please contact us for lead time.
|
2090.09 |
|
|
Groco Gpb-1-24V Gear Pump, Oil Chg 24V
Groco- Gear Pump Bronze 3.0GPM 50psi Max 24VDC 3/8”NPT Ports
|
467.22 |
|
|
Groco Gpbr-1-24V Rev Gear Pump, Oil Chg 24V
|
639.00 |
|
|
March 809-BR 24V Mag Drive Pump
Applications for the 809-BR 12V & 24V Magnetic Drive Pump include hot water systems, refrigeration systems and solar heating.
March Pump's industrial 809-BR 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 5 gallons per minute at 1.5 feet, and its maximum head is 7 Feet (or around 3PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.01 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Max Flow
5 GPM
18.9 LPM
Max Head
7.1 FT
2.1 M
Power
.01 HP
.007 KW
Electrical
12V Range 0-14 or 24V Range 0-26
Type
Centrifugal Mag Drive
Inlet
1/2"MPT
Outlet
1/2"MPT
Wet End
Bronze (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
|
465.08 |
|
|
March 809 BRC HS 24VDC Mag-Drive Centrifugal Pumps Bronze 24VDC High Speed 5.5GPM
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 24VDC High Speed 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet
|
501.56 |
|
|
Mate USA M164-660-15 Water Pressure Systems 12 or 24 volts
This Mate USA 2.6 GPM Self-priming automatic electric pumps with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Main applications: fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.
UP2/E
2.6 GPM Water Pressure System
Volt: 12V & 24V
Fuse:7.5A
Gpm: 2.6
Psi: 29
Ports: 3/8"NPT
Fresh water: Yes
Salt water: Yes
|
280.80 |
|
|
Mate USA M164-008-12 12V GEAR PMP 4GPM UP3-R
Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.
Part n.16400812
Product NameUP3-R
Voltage (V)12
Consumption (A)6
Fuse (A)10
Self-priming (m) 1.5
Flow rate (l/min) 15
Hose (mm)13
Pressure (bar)2
Ports (BSP)3/8″
Motor power (W)120
|
326.63 |
|
|
Mate USA M164-095-15 12/24V Reversible Diesel/Oil Transfer Pump with Flow Regulation
UP8-RE
Volt: 12V & 24V
Fuse: 4A/2A
Gpm: 2.6
Ports: 3/8" NPT
Psi: 51
Diesel: Yes
Oil: Yes
Heavy duty Electronic Gear pump with Integrated Smart Keypad to reverse the flow direction and to manually fine tune the flow rate. The flow rate is also automatically adjusted according to the viscosity of the fluid to avoid cavitation. Best for oil and diesel transferring. Compact and Easy to operate and carry.
|
459.38 |
|
|
Mate USA M164-064-15 Reversible Electronic Pump with Bronze Gears
UP6-RK
6.9 GPM Reversible Diesel/Oil Transfer Kit
Volt: 12V & 24V
Fuse: 10 amp
Ports: 1/2"
Gpm: 6.9
Psi: 29
Diesel: Yes
Oil: Yes
Diesel/oil transfer kit with electronic control. During priming the speed of the pump increases and the system automatically shuts off in case of empty tank and short circuit. Being equipped with a reverse-flow function system, this kit is particularly indicated for tank balancing operations on board.
|
695.63 |
|
|
Gianneschi CP20-24V Bronze 24V Self-Priming Pump
Gianneschi CP20-24V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.18KW (0.25 Horsepower), 2800 RPM, 24 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.
Pump Body: Bronze
Impeller: Bronze
Shaft: 316 Stainless Steel
Port Size: Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch
Motor Specs : 0.18KW (0.25 Horsepower), 2800 RPM, 24 Volts DC
|
1095.94 |
|
|
Gianneschi CP26-A1-24V Brz 24V Self Prim Pump
CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 1500 RPM, 24 Volts DC. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Applications:
Ballast
Bilge
Diesel oil
F.W./S.W. Circulation
Fire-fighting
Grey water
S.W feeding
Port Size:
From 3/4'' to 1'' 1/2 BSP
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
1603.31 |
|