|
Constant Torque Hinge Symmetric Forward Torque 0.9 N-m - Reverse Torque 0.9 N-m - Large Size - Stainless Steel 316 - Polished
Southco’s line of Constant Torque Position Control Hinges provide constant resistance throughout the entire range of motion, enabling users to easily position doors, display screens, and other mounted components and hold them securely at any desired angle – fully opened, fully closed, or anywhere in between. Hinges are available in a wide variety of sizes, materials, and torque ranges to satisfy application needs across industries.
Specifications:
Material: 316 Stainless Steel
Finish: Polished
Color/Appearance: Polished
Forward Torque (Nm): 0.90
Reverse Torque (Nm): 0.90
Access Restriction: No Restriction
Torque Type: Symmetric
Mounting Style: Screw Mount
Installation: Rivet/Screw
Series: 400 Series
Size Series: Large Size
Class: E6/ST - Constant Torque Position Control Hinges
|
55.38 |
|
|
SS175H-W/0 Stainless Steel Thru-Hull Transducer - 0° - 9-Pin
The SS175H-W is a stainless steel, thru-hull CHIRP transducer, ideal for sportfishing and commercial vessels up to 8M (25') in size. This single-channel transducer offers High CHIRP combined with a wide beam for the best resolution and coverage in shallower depths.
Features:
130-210 kHz High CHIRP with wide 25° beam for excellent fish targets
Up to 310M (1000') range with High CHIRP
1 internal broadband ceramic
Thru-hull with stainless steel housing
Suitable for fiberglass and wood hulls
Ideal for sportfishing and commercial vessels up to 8M (25')
Recommended for use with Simrad NSSevo3 Lowrance HDS Gen3 multifunction displays
|
1458.80 |
|
|
Oval Head SS Gunnel Mount Rod Holder - 0° - 9"
Crafted of 316 Stainless Steel
Head Size: 3.28" x 4.06"
Length: 9"
Angle: 0° Head
Inner Diameter: 1-5/8"
|
70.09 |
|
|
Round Head Closed Base Rod Holder - 0° - 9"
Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT
pipe to hose fitting.
Head Size: 3.85"
Length: 9"
Angle: 0° Head
Inner Diameter: 1-5/8"
|
83.14 |
|
|
Blind Mount Round Head Closed Base Rod Holder - 0° - 9"
Eliminate fastening from the top of flange and enhance the look of your gunnel
With drain hole to accept 1/4" NPT pipe to hose fitting
Head Size: 3.84"
Length: 9"
Angle: 0° Head
Inner Diameter: 1-5/8"
|
94.55 |
|
|
Oval Head Closed Base Rod Holder - 0° - 9"
Heavy duty oval head closed end base, with drain hole to accept 1/4"
NPT pipe to hose fitting
Head Size: 3.28" x 4.06"
Length: 9"
Angle: 0° Head
Inner Diameter: 1-5/8"
|
86.40 |
|
|
Replacement Vinyl Insert - 0° - 9" - Black
Replacement vinyl insert for 9" rod holders
|
9.77 |
|
|
Replacement Vinyl Insert - 0° - 9" - White
Replacement vinyl insert for 9" rod holders
|
9.77 |
|
|
G4 Back Pin 0.9" (23mm) LED Light"
G4 utilizes High Power LEDs for more than enough light to read and work by. As with all our replacement bulbs the G4 includes a built in Buck Regulator, which produces little heat, making it the most robust on the market today.
Compact size
Long Life: Up to 50,000 Hours
No Fire Hazard Like Halogens
|
9.97 |
|
|
G4 Back Pin 0.9" (23mm) LED Light"
G4 utilizes High Power LEDs for more than enough light to read and work by. As with all our replacement bulbs the G4 includes a built in Buck Regulator, which produces little heat, making it the most robust on the market today.
Compact size
Long Life: Up to 50,000 Hours
No Fire Hazard Like Halogens
|
9.97 |
|
|
B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin
The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials.
Features
Industry standard for low-profile transducers
Depth and temperature
Good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze transducer housing
Boat Size: 8M (25') and up
Specifications:
Weight: Bronze - 0.9 kg (2.0 lb)
Hull Deadrise: Up to 8°
Acoustic Window: Urethane
Hole Diameter: 51mm (2")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
288.35 |
|
|
B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT for Simrad, Lowrance & B & G
The B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull.
Features:
Depth only or depth and temperature
600 W
Dual-frequency element: 50 kHz with a wide 45° beamwidth for performance to 353 m (1,200'), 200 kHz with a 12° beamwidth for performance to 206 m (700')
Right-angle cable exit saves space and protects the transducer if stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Low-profile, bronze housing has minimal drag
Plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials and deadrise angles
Specifications:
Weight: 0.9 kg (2.0 lb.)
Recommended Boat Length: Up to 8 m (25')
Hull Material: Fiberglass or wood
Hull Deadrise: Best performance through 7°. Can accommodate up to 12°.
Acoustic Window: Urethane
Hole Diameter: 51 mm (2")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
288.35 |
|
|
Manufacturer Names that start with a number.
Such as 303 Products and 3M Products
|
|
|
BURKS 22571-9.00, Wet End Kit for Series G9A-1-1/2
Pump kit Only* for all G9-1-1/2 Series, 213-215JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22571-9.00 For assembly on motor with a 213-215JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
2971.31 |
|
|
BURKS 22609-9.00, Wet End Kit for Series G9-2
Pump kit Only* for all G9-2 Series, 254-256JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog # 22609-9.00 For assembly on motor with a 254-256JM Nema frame Motor (check motor specs.). Full size impeller is 9 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.
|
4039.95 |
|