|
Dual Row Marine LED Light Light Bar - 14"
SPECS
Input Voltage: 10-30V DC
Wattage: 72W (24-3W CREE LEDs)
Raw Lumens: 5400
Color Temperature: 6000K
Beam Pattern: Combo/Flood(90deg)/Spot(8deg)
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: White Coating with UV Inhibitors
Membrane: Gore™
Lens Material: PC
Mounting Bracket: Die-cast Aluminum
Hole Dimensions: Brackets turned inward – 13.50in
Brackets turned outward – 14.75in
Mounting Bolt Drill – .25in
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
Current Consumption: 3.7amps at 13.8 volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
164.48 |
|
|
Lighting - Flashlights and Lanterns
|
|
|
Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.
For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.
Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.
Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.
In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.
When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.
Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White
One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.
ACR RCL-300 Remote Controlled Searchlight - 12V/24V
The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.
Underwater Lighting
Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue.
XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.
For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.
Fair Winds, Smooth Sailing.
____________________________________________________________________________________________________
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
10" Adapt™ Light Bar - Black
The Adapt™ LED Light Bars are the world’s first off-road lighting products that can change instantly according to conditions. Adapt offers 8 selectable beam patterns that range from a 90 degree broad short-distance beam to a highly focused 15 degree long-distance spot beam in a single fixture. It also includes RIGID’s new Active View™ Technology, which allows the beam pattern to actively adjust with vehicle speed. There are no moving parts within the Adapt. Instead, RIGID uses advanced LED technology and combines it with patented new optics to create a revolutionary lighting solution that can Adapt with changing conditions. Further, Adapt has built-in accent lighting that can be set to any color in the light spectrum, including white, for a custom look around town. The Adapt has a signature new look that is unlike any other light bar on the market, and it even has expanded mounting capabilities that include new base-mounting options in addition to traditional side mounts. Adapt LED light bars include a RIGID Dash Controller, which is a molded backlit dash-mounted unit that offers easy, intuitive control of Adapt’s beam patterns, Adaptive Mode, accent lighting, and programmable presets. RIGID Adapt Light Bars are available in 10-inch to 50-inch lengths and include a RIGID Dash Controller, Under Dash Module, wiring harness, and mounting hardware. With the RIGID Adapt, it has never been easier to Own the Night.
*GPS Module Kit Included
Features:
Active View Technology - Automatically Change Beam Patterns Based On Vehicle Speed (ADAPT GPS Module Required)
Dash Controller with Wiring Harness
8 Selectable Beam Patterns From 15-Degrees to 90-Degrees
Integrated Optic Design with Spot, Flood, and Driving Zones
Selectable RGB-W Accent Lighting – Choose From Any Color in the Light Spectrum
Back Lit Molded Dash Controller - Enables User to Select Mode, Accent Color, Adaptive Mode, and Select Between 2 User Presets
2 User Presets – Preset Both Beam Pattern Mode & Accent Lighting Colors
Multiple Mounting Locations; Traditional Side Mounting or Underside Low-Profile Mount
|
866.24 |
|
|
20" Adapt™ Light Bar - Black
The Adapt™ LED Light Bars are the world’s first off-road lighting products that can change instantly according to conditions. Adapt offers 8 selectable beam patterns that range from a 90 degree broad short-distance beam to a highly focused 15 degree long-distance spot beam in a single fixture. It also includes RIGID’s new Active View™ Technology, which allows the beam pattern to actively adjust with vehicle speed. There are no moving parts within the Adapt. Instead, RIGID uses advanced LED technology and combines it with optics to create a revolutionary lighting solution that can Adapt with changing conditions. Further, Adapt has built-in accent lighting that can be set to any color in the light spectrum, including white, for a custom look around town. The Adapt has a signature new look that is unlike any other light bar on the market, and it even has expanded mounting capabilities that include new base-mounting options in addition to traditional side mounts. Adapt LED light bars include a RIGID Dash Controller, which is a molded backlit dash-mounted unit that offers easy, intuitive control of Adapt’s beam patterns, Adaptive Mode, accent lighting, and programmable presets. RIGID Adapt Light Bars are available in 10-inch to 50-inch lengths and include a RIGID Dash Controller, Under Dash Module, wiring harness, and mounting hardware. With the RIGID Adapt, it has never been easier to Own the Night.
*GPS Module Kit Included
Features:
Active View Technology - Automatically Change Beam Patterns Based On Vehicle Speed (ADAPT GPS Module Required)
Dash Controller with Wiring Harness
8 Selectable Beam Patterns From 15-Degrees to 90-Degrees
Integrated Optic Design with Spot, Flood, and Driving Zones
Selectable RGB-W Accent Lighting – Choose From Any Color in the Light Spectrum
Back Lit Molded Dash Controller - Enables User to Select Mode, Accent Color, Adaptive Mode, and Select Between 2 User Presets
2 User Presets – Preset Both Beam Pattern Mode & Accent Lighting Colors
Multiple Mounting Locations; Traditional Side Mounting or Underside Low-Profile Mount
|
1407.00 |
|
|
30" Adapt™ Light Bar - Black
The Adapt™ LED Light Bars are the world’s first off-road lighting products that can change instantly according to conditions. Adapt offers 8 selectable beam patterns that range from a 90 degree broad short-distance beam to a highly focused 15 degree long-distance spot beam in a single fixture. It also includes RIGID’s new Active View™ Technology, which allows the beam pattern to actively adjust with vehicle speed. There are no moving parts within the Adapt. Instead, RIGID uses advanced LED technology and combines it with optics to create a revolutionary lighting solution that can Adapt with changing conditions. Further, Adapt has built-in accent lighting that can be set to any color in the light spectrum, including white, for a custom look around town. The Adapt has a signature new look that is unlike any other light bar on the market, and it even has expanded mounting capabilities that include new base-mounting options in addition to traditional side mounts. Adapt LED light bars include a RIGID Dash Controller, which is a molded backlit dash-mounted unit that offers easy, intuitive control of Adapt’s beam patterns, Adaptive Mode, accent lighting, and programmable presets. RIGID Adapt Light Bars are available in 10-inch to 50-inch lengths and include a RIGID Dash Controller, Under Dash Module, wiring harness, and mounting hardware. With the RIGID Adapt, it has never been easier to Own the Night.
*GPS Module Kit Included
Features:
Active View Technology - Automatically Change Beam Patterns Based On Vehicle Speed (ADAPT GPS Module Required)
Dash Controller with Wiring Harness
8 Selectable Beam Patterns From 15-Degrees to 90-Degrees
Integrated Optic Design with Spot, Flood, and Driving Zones
Selectable RGB-W Accent Lighting – Choose From Any Color in the Light Spectrum
Back Lit Molded Dash Controller - Enables User to Select Mode, Accent Color, Adaptive Mode, and Select Between 2 User Presets
2 User Presets – Preset Both Beam Pattern Mode & Accent Lighting Colors
Multiple Mounting Locations; Traditional Side Mounting or Underside Low-Profile Mount
|
1902.00 |
|
|
40" Adapt™ Light Bar - Black
The Adapt™ LED Light Bars are the world’s first off-road lighting products that can change instantly according to conditions. Adapt offers 8 selectable beam patterns that range from a 90 degree broad short-distance beam to a highly focused 15 degree long-distance spot beam in a single fixture. It also includes RIGID’s new Active View™ Technology, which allows the beam pattern to actively adjust with vehicle speed. There are no moving parts within the Adapt. Instead, RIGID uses advanced LED technology and combines it with optics to create a revolutionary lighting solution that can Adapt with changing conditions. Further, Adapt has built-in accent lighting that can be set to any color in the light spectrum, including white, for a custom look around town. The Adapt has a signature new look that is unlike any other light bar on the market, and it even has expanded mounting capabilities that include new base-mounting options in addition to traditional side mounts. Adapt LED light bars include a RIGID Dash Controller, which is a molded backlit dash-mounted unit that offers easy, intuitive control of Adapt’s beam patterns, Adaptive Mode, accent lighting, and programmable presets. RIGID Adapt Light Bars are available in 10-inch to 50-inch lengths and include a RIGID Dash Controller, Under Dash Module, wiring harness, and mounting hardware. With the RIGID Adapt, it has never been easier to Own the Night.
*GPS Module Kit Included
Features:
Active View Technology - Automatically Change Beam Patterns Based On Vehicle Speed (ADAPT GPS Module Required)
Dash Controller with Wiring Harness
8 Selectable Beam Patterns From 15-Degrees to 90-Degrees
Integrated Optic Design with Spot, Flood, and Driving Zones
Selectable RGB-W Accent Lighting – Choose From Any Color in the Light Spectrum
Back Lit Molded Dash Controller - Enables User to Select Mode, Accent Color, Adaptive Mode, and Select Between 2 User Presets
2 User Presets – Preset Both Beam Pattern Mode & Accent Lighting Colors
Multiple Mounting Locations; Traditional Side Mounting or Underside Low-Profile Mount
|
2232.74 |
|
|
50" Adapt™ Light Bar - Black
The Adapt™ LED Light Bars are the world’s first off-road lighting products that can change instantly according to conditions. Adapt offers 8 selectable beam patterns that range from a 90 degree broad short-distance beam to a highly focused 15 degree long-distance spot beam in a single fixture. It also includes RIGID’s new Active View™ Technology, which allows the beam pattern to actively adjust with vehicle speed. There are no moving parts within the Adapt. Instead, RIGID uses advanced LED technology and combines it with optics to create a revolutionary lighting solution that can Adapt with changing conditions. Further, Adapt has built-in accent lighting that can be set to any color in the light spectrum, including white, for a custom look around town. The Adapt has a signature new look that is unlike any other light bar on the market, and it even has expanded mounting capabilities that include new base-mounting options in addition to traditional side mounts. Adapt LED light bars include a RIGID Dash Controller, which is a molded backlit dash-mounted unit that offers easy, intuitive control of Adapt’s beam patterns, Adaptive Mode, accent lighting, and programmable presets. RIGID Adapt Light Bars are available in 10-inch to 50-inch lengths and include a RIGID Dash Controller, Under Dash Module, wiring harness, and mounting hardware. With the RIGID Adapt, it has never been easier to Own the Night.
*GPS Module Kit Included
Features:
Active View Technology - Automatically Change Beam Patterns Based On Vehicle Speed (ADAPT GPS Module Required)
Dash Controller with Wiring Harness
8 Selectable Beam Patterns From 15-Degrees to 90-Degrees
Integrated Optic Design with Spot, Flood, and Driving Zones
Selectable RGB-W Accent Lighting – Choose From Any Color in the Light Spectrum
Back Lit Molded Dash Controller - Enables User to Select Mode, Accent Color, Adaptive Mode, and Select Between 2 User Presets
2 User Presets – Preset Both Beam Pattern Mode & Accent Lighting Colors
Multiple Mounting Locations; Traditional Side Mounting or Underside Low-Profile Mount
|
2615.53 |
|
|
Pro Series 3.0 Double Row 20" LED Light Bar - Combo Optics - Black Housing
The 20-inch Double Row Series is Black Oak's most popular light by a landslide! With its compact yet over-achieving attitude, this aggressive dual-row off-road flood light fits literally anywhere! Cars, trucks, snowmobiles, lawnmowers, tractors, trailers, etc. This powerful 100W light bar will send most full-size light bars back home to their momma. With its completely customizable spot, flood, or combo configurations, users control what is needed!
Consisting of a combination of both flood and spot beam pattern LEDs, this 20-inch LED bar is capable of both lighting up objects and potential hazards far down the road as well as providing a wash of light on the sides of a vehicle, making it suited for driving in any number of conditions and scenarios. With a variety of mounting options, this light bar is well suited for Jeep hood mounts, ATVs, trucks, UTVs, motorcycles, boats, heavy equipment, and a variety of other vehicles.
As with all Black Oak LED light bars, this 20-inch dual-row light bar is backed by Black Oak's 30-day money-back guarantee as well as our limited lifetime warranty.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Premium Dupont powder-coating for the highest quality and most resistant finish
Combination Flood/Spot light pattern offers a superior lighting pattern
Multi-mount brackets made of 9 gauge marine grade Stainless Steel
Lens cover made of Lexan with a UV protectant
Activities & Uses:
Off-road Spot light
T-Top boat light
Jeep hood light
UTV dune riding
Ram Rebel grille light
Technical Specifications:
Total Wattage: 200W
Amp. Draw: 8.4
LED Quantity: 20
Weight: 7.8 lbs.
Raw Lumens: 26,400
Warranty: Lifetime
IP Rating: IP69K
Connection: Deutsch connector
Dimensions with Mounting Bracket (Width x Height): 21.4" x 4.125"
In the Box:
Light bar
Complete wiring harness with fuse, relay, and switch
12 gauge wire
Mounting brackets
All hardware is ready to install!
*Sold as an Individual
|
571.20 |
|
|
Radiance+ SR-Series LED Light - 8 Option RGBW Backlight - 30"
The versatility of the RIGID Radiance lighting family just got even better with the introduction of the Radiance Plus SR-Series. RIGID’s RGB LEDs provide the user with the ability to toggle between eight available backlight options with the flip of a switch: Red, Green, Blue, Light Blue, Purple, Amber, White or Rotating. The RIGID Radiance Plus SR-Series single-row LED light bar is the perfect solution for those who want RIGID’s legendary quality at a level everyone can attain. Utilizing RIGID’s LED technology, the Radiance Plus light bars feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand. The Radiance Plus SR-Series LED light bars are built with the same sleek low-profile high-grade aluminum alloy housing as the legendary SR-Series, but that’s where the visual similarities end. Inside, the Radiance SR-Series is feature-packed, with a black exposed circuit board, optimized forward projecting Broad Spot optics, prominent RIGID branding plates, and RGB LEDs with seven backlight colors. Available in 10, 20, 30, 40, and 50-inch lengths, and fits all existing SR-Series mounting options. The wiring harness and switch are sold separately (#40200). The RIGID Radiance Plus SR-Series light bar is for the customer who wants a truly custom look, making it easier than ever to Own The Night.
Features:
Same Construction As RIGIDs SR-Series
Fits All SR-Series Light Covers And Mounts
Black Exposed Printed Circuit Board
8 Back Lighting Options: Red, Green, Blue, Light Blue, Purple, Amber, White, or Rotating
10 Year Warranty
9-15 V DC
Harness And Switch Sold Separately, Part Number 40200
Back Lighting Independently Controlled Using Switch Logic
Black Powder Coat Finish
Pressure Equalizing Vent
IP68 Compliant - Dust/Water Ingress
High-Grade Aluminum Alloy Housing And Heat Sink
Over/Under Voltage Protection
High Impact Polycarbonate Lens
Mounting Brackets Included
RFI/EMI Protection
RoHS Compliant
Off-Road Use Only
Specifications:
Optics: Broad Spot
Watts: 137
Amp Draw: 10.5
Raw Lumens: 16320
Lux @ 10m: 1976.42
Beam Distance @ 1Lux: 444.55
Beam Distance @ .25Lux: 889.15
Horizontal Beam Angle: 23.7
Product Comes With:
Light Bar
Mounting Hardware
|
631.97 |
|
|
Pro Series 3.0 10" 850nm Infrared Double Row LED Light Bar - Combo Optics - Black Housing
Black Oak's Infrared 10" Double Row Series light gives the user an unfair advantage when using Night Vision Optics. Black Oak's infrared LED bars utilize actual IR LEDs, not a filter, and emit at 850nm. The energy produced is invisible to the naked eye. When used with Night Vision Optics, or infrared cameras, Black Oak's Infrared LED bars light up the night for hundreds of yards, allowing its user to spot potential hazards or game without ever being seen.
Designed for military lighting, night hunting or fishing, security vehicles, and other vehicles that are used for nighttime operations.
Versatility and compact power are what Black Oak strived for when constructing this 10" LED light bar, letting users mount this baby right out of the box with sturdy mounting brackets, stainless hardware, and a wiring harness included! Made only with materials at the forefront of the market, the 10" LED light bar showcases an IP69K rating, allowing users to completely pound it with water, ice, saltwater, and especially sheer brute force. With a total height of 3.3 inches, this dual-row off-road flood light fits just about anywhere while putting out a crazy amount of luminous light!
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Premium Dupont powder-coating for the highest quality and most resistant finish
Combination Flood/Spot light pattern offers a superior lighting pattern
Multi-mount brackets made of 9 gauge marine grade Stainless Steel
Lens cover made of Lexan with a UV protectant
Activities & Uses:
IP69K rated, highest in the business
Powder coated for even stronger protection
Osram and Cree LED's are some of the best quality LEDs in the industry
Military-grade breather to ensure absolutely no moisture fogs up the bar
Technical Specifications:
Total Wattage: 100W
Amp. Draw: 3.15
LED Quantity: 20
Weight: 6.6 lbs.
Warranty: Lifetime
IP Rating: IP69K
Connection: Deutsch connector
Dimensions with Mounting Bracket (Width x Height): 11.4" x 4.125"
In the Box:
Light bar
12 gauge wire
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware is ready to install!
*Sold as an Individual
|
436.80 |
|
|
40" Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0
Anyone who knows trucks knows lighting, and how valuable it is to be able to see whats flying at them. Plenty of companies offer LED single-row light bars, but when users are deep in the woods, far out of town, and miles away from anything resembling help, are they willing to take that risk? With this 40-inch light bar, equip 5W high-quality LEDs with a combo light spread! This Jeep LED bar boasts an IP69K rating (the highest attainable rating). The single-row light bar gives users 40 inches of solid security, powder coated in reassurance that they aren't driving home in the dark. With the highest grade standard on the market, don't settle for just strong; demand Black Oak Strong!
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Combination Flood/Spot light pattern offers a superior lighting pattern
Activities & Uses:
Off-roading
UTV roof mount
Industrial flood light
Roof rack lighting
Behind the grill light
Technical Specifications:
Total Wattage: 200W
Amp. Draw: 14.6
LED Quantity: 40
Weight: 11.4 lbs.
Raw Lumens: 26,400
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 43" x 2.6"
In the Box:
40” light bar
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
617.99 |
|
|
Radiance + 10" Light Bar - RGBW
The stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ RBGW light bars. The latest addition to the Radiance light family provides you with the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary E-Series but include a stylish color-changing backlight.
Inside, the Radiance+ RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ RGBW light bars take customization to the next level. Own the night in style with Radiance+ RBGW lighting.
Features:
8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode)
Backlighting is independently controlled using switch logic.
Fits all E-Series light covers and mounts
Black exposed printed circuit board
10-year warranty
9-15 V DC
Black powder coat finish
Pressure equalizing vent
IP68 compliant - dust and water ingress
High-grade aluminum alloy housing and heat sink
Over/under voltage protection
high-impact polycarbonate lens
Mounting brackets are included
RFI/EMI protection
Rohs compliant
Off-road use only
Product Comes with:
10-inch Radiance+ RGBW light bar
Harness
Mounting brackets
Media pack
Specifications:
Size (inch): 10"
Weight (Lbs): 4.40
Optics: Spot drive
Watts: 51
Amp Draw: 3.65
Raw Lumens: 4752
Lux at 10m: 834.99
Beam Distance at 1Lux: 289
Beam Distance at .25 Lux: 577.9
Peak Beam Intensity (cd): 83499
Horizontal Beam Angle: 18
|
247.50 |
|
|
Radiance + 20" Light Bar - RGBW
The stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ RBGW light bars. The latest addition to the Radiance light family provides you with the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary E-Series but include a stylish color-changing backlight.
Inside, the Radiance+ RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ RGBW light bars take customization to the next level. Own the night in style with Radiance+ RBGW lighting.
Features:
8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode)
Backlighting is independently controlled using switch logic.
Fits all E-Series light covers and mounts
Black exposed printed circuit board
10-year warranty
9-15 V DC
Black powder coat finish
Pressure equalizing vent
IP68 compliant - dust and water ingress
High-grade aluminum alloy housing and heat sink
Over/under voltage protection
high-impact polycarbonate lens
Mounting brackets are included
RFI/EMI protection
Rohs compliant
Off-road use only
Product Comes with:
20-inch Radiance+ RGBW light bar
Harness
Mounting brackets
Media pack
Specifications:
Size (inch): 20"
Weight (Lbs): 6.10
Optics: Spot drive
Watts: 76
Amp Draw: 5.4
Raw Lumens: 7128
Lux at 10m: 1295.36
Beam Distance at 1Lux: 359.9
Beam Distance at .25 Lux: 719.8
Peak Beam Intensity (cd): 129536
Horizontal Beam Angle: 16
|
375.00 |
|
|
Radiance + 30" Light Bar - RGBW
The stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ RBGW light bars. The latest addition to the Radiance light family provides you with the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary E-Series but include a stylish color-changing backlight.
Inside, the Radiance+ RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ RGBW light bars take customization to the next level. Own the night in style with Radiance+ RBGW lighting.
Features:
8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode)
Backlighting is independently controlled using switch logic.
Fits all E-Series light covers and mounts
Black exposed printed circuit board
10-year warranty
9-15 V DC
Black powder coat finish
Pressure equalizing vent
IP68 compliant - dust and water ingress
High-grade aluminum alloy housing and heat sink
Over/under voltage protection
high-impact polycarbonate lens
Mounting brackets are included
RFI/EMI protection
Rohs compliant
Off-road use only
Product Comes with:
30-inch Radiance+ RGBW light bar
Harness
Mounting brackets
Media pack
Specifications:
Size (inch): 30"
Weight (Lbs): 8.60
Optics: Spot drive
Watts: 125
Amp Draw: 8.9
Raw Lumens: 11880
Lux at 10m: 1991.08
Beam Distance at 1Lux: 446.2
Beam Distance at .25 Lux: 892.4
Peak Beam Intensity (cd): 199108
Horizontal Beam Angle: 17.4
|
487.50 |
|