Dome/Down Lights

Adapter Kit for Halo & Orbit Flush Mount Down Lights Replacing existing lights? Lumitec's retrofit kit covers oversized holes from old style halogen lights while providing an ideal mounting solution for our Orbit Flush Mount Down Lights. Ingenious clamp-in design has no exposed fasteners for a clean look inside or out. Use in holes 1.875" to 2.750". Specifications: Width: 3.00" (7.62cm) Height: 3.00" (7.62cm) Depth: 0.72" (1.82cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RGBW Tri-Lite w/Stainless Steel Bezel Characteristics : Dimensions: 4.25” x 1.375” x 0.625” 10 White LEDS 5 RGB LEDS Waterproof Clear Lens, Polycarbonate Housing Available 316 Highly Polished Stainless Steel Snap-on Bezel  Impact Resistant Shock and Vibration Proof Connectors: 5-8” Leads 18 Gauge Wire Ground - Black White Light - White (+) Blue Light - Blue (+) Red Light - Red (+) Green Light - Green (+) Voltage Requirements: Operates on 9-16 Volts DC Current (mA): White - 79.7 Red - 33.14 Blue - 37.05 Green- 35.94

Color-Changing White, Blue & Red Dimmable - White Powder Coat Down Light Shadow-Caster’s line of above water marine lights, the SCM-DL Down Light is perfect for lighting overhead areas in the interior and exterior areas of your vessel. Ideal for lighting T-Tops, cabins, and more, the SCM-DL offers a wide spread of light available in multiple colors and varieties.  All Down Lights are built into high-quality, powder-coated white housing and include a bracket and hardware for flush mounting,  and include a full install diagram.  Features: Thin Design (.175” thick) 2” Outside Diameter (1 ¼ “ Mounting Hole) 250 Lumens 10-40 Volts Input 3 Watts Includes Bracket and Hardware for Flush Mounting Option Install Diagram Shadow-Net Enabled 2 Year Warranty Made in the USA

Orbit Down Light - White Housing - Red with White Dimming Light  Lumitec's Flush Mount Down Lights set a new standard in overhead lighting. The luminaires feature weatherproof construction suitable for interior or exterior installations, a shallow-depth profile (less than 1/2" below mounting surface) and an easy to install mounting system. Ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. The lights are fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming without external control modules or specialized switches. This allows boat owners to use any existing on-off switches and eliminates the need for multiple wire runs necessary for other multi-colored lights. 0 to 30VDC, draws 220mA @ 12V, 110mA @ 24V. Features: Intelligent circuitry allows for dimming using your existing SPST switch Sealed for long life and extreme durability - IP 67 compliant, interior or exterior use Attractive compact design for helm station, flybridge, hard top, and interior spaces Mounting system is easy and fast - no "rat traps", no exposed fasteners More features, smaller package, and lower price than competitive products WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Halo Down Light - Brushed Housing, Red with White Dimming Light Lumitec's Flush Mount Down Lights set a new standard in overhead lighting. The luminaires feature weatherproof construction suitable for interior or exterior installations, a shallow-depth profile (less than 1/2" below mounting surface) and an easy to install mounting system. Ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. The lights are fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming without external control modules or specialized switches. This allows boat owners to use any existing 'on-off' switches and eliminates the need for multiple wire runs necessary for other multi-colored lights. 10 to 30VDC, draws 220mA @ 12, 110mA @ 24V. Features: Intelligent circuitry allows for dimming using your existing SPST switch Sealed for long life and extreme durability - IP 67 compliant, interior or exterior use Attractive compact design for helm station, flybridge, hard top, and interior spaces Mounting system is easy and fast - no 'rat traps', no exposed fasteners More features, smaller package, and lower price than competitive products WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Halo Down Light - White Housing, Blue with White Dimming Light  Lumitec's Flush Mount Down Lights set a new standard in overhead lighting. The luminaires feature weatherproof construction suitable for interior or exterior installations, a shallow-depth profile (less than 1/2" below mounting surface) and an easy to install mounting system. Ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. The lights are fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming without external control modules or specialized switches. This allows boat owners to use any existing 'on-off' switches and eliminates the need for multiple wire runs necessary for other multi-colored lights. 10 to 30VDC, draws 220mA @ 12, 110mA @ 24V. Features: Intelligent circuitry allows for dimming using your existing SPST switch Sealed for long life and extreme durability - IP 67 compliant, interior or exterior use Attractive compact design for helm station, flybridge, hard top, and interior spaces Mounting system is easy and fast - no 'rat traps', no exposed fasteners More features, smaller package, and lower price than competitive products WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Full Color Dimmable Shadow Net Enabled White Powder Coat Finish Down Light A great addition to Shadow-Caster's line of above water marine lights, the SCM-DL Down Light is perfect for lighting overhead areas in the interior and exterior areas of your vessel. Ideal for lighting T-Tops, cabins and more, the SCM-DL offers a wide spread of light available in multiple colors. Specifications: Thin Design (.175" thick) 2" Outside Diameter (1.25" Mounting Hole) 250 Lumens 10-40 Volts Input 3 Watts Includes Bracket and Hardware for Flush Mounting Option Install Diagram Shadow-Net Enabled 2-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0 Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spreader light 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Spreader Light Aft deck fishing lights Foredeck lights Accent lighting Game fishing lights Boat wake lights Technical Specifications: Total Wattage: 20W Amp. Draw: 1.4 LED Quantity: 2 Weight: 0.7 lbs. Raw Lumens: 1560 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”  Mounting Holes: 3-1/2” apart horizontally In the Box: 2” marine white spreader light Wiring pigtail  Stainless steel mounting kit *Sold as an Individual

Single Color White Non-Dimmable White Powder Coat Down Light A great addition to Shadow-Caster's line of above water marine lights, the SCM-DL Down Light is perfect for lighting overhead areas in the interior and exterior areas of your vessel. Ideal for lighting T-Tops, cabins and more, the SCM-DL offers a wide spread of light available in multiple colors. Specifications: Thin Design (.175" thick) 2" Outside Diameter (1.25" Mounting Hole) 250 Lumens 10-40 Volts Input 3 Watts Includes: Bracket and Hardware for Flush Mounting Option Install Diagram Shadow-Net Enabled 2-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mirage Flush Mount Down Light Spectrum RGBW - Polished Bezel Lumitec's Mirage down lights remain the best-performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20W halogens by up to 300%. Completely sealed (IP67 compliant), it is perfectly suited for a variety of indoor or outdoor overhead lighting needs. New for 2016, Mirage is available with our Spectrum full-color output. Select white output, "color-cross-fade", or any color in the rainbow. Specifications: Lumens (White): 333 Voltage: 10-30V DC 12V DC Amps: 400mA 24V DC Amps: 200mA Rated Watts: 6 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 F Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: 2" Length: N/A Width: N/A Depth: 1in (2.54cm) Diameter: 3.25in (8.25cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mirage Flush Mount Down Light Spectrum RGBW - Glass Bezel Lumitec's Mirage down lights remain the best-performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20W halogens by up to 300%. Completely sealed (IP67 compliant), it is perfectly suited for a variety of indoor or outdoor overhead lighting needs. New for 2016, Mirage is available with our Spectrum full-color output. Select white output, "color-cross-fade", or any color in the rainbow. Specifications: Lumens (White): 333 Voltage: 10-30V DC 12V DC Amps: 400mA 24V DC Amps: 200mA Rated Watts: 6 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 F Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: 2" Length: N/A Width: N/A Depth: 1in (2.54cm) Diameter: 2.5in (6.35cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mirage Flush Mount Down Light Spectrum RGBW - White Housing Lumitec's Mirage down lights remain the best-performing down light on the market today. Utilizing the most efficient emitters commercially available, Mirage boasts incredible output and a profile that is among the slimmest in the industry. In field studies Mirage exceeded the output of 20W halogens by up to 300%. Completely sealed (IP67 compliant), it is perfectly suited for a variety of indoor or outdoor overhead lighting needs. New for 2016, Mirage is available with our Spectrum full-color output. Select white output, "color-cross-fade", or any color in the rainbow. Specifications: Lumens: (White): 333 Voltage: 10-30V DC 12V DC Amps: 400mA 24V DC Amps: 200mA Rated Watts: 6 CCT: 5000 CRI: 70+ Op. Temp F/C:-31/35 to + 131/55 F Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: 2" Length: N/A Width: N/A Depth: 1in (2.54cm) Diameter: 3.25in (8.25cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2" LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0 The Cree flood light pod by Black Oak LED offers two levels of power to fill any need users might possibly have. This CREE LED floodlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed. Cree and Osram are the biggest names on the LED market for a reason. The Cree flood lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, this CREE LED floodlights is ready to go. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Auxiliary motorcycle lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" LED Pod Light - Spot Optics - Black Housing - Pro Series 3.0 This Cree spot light pod by Black Oak LED offers 40 watts of total power. Also, this CREE LED spotlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed. Cree and Osram are the biggest names on the LED market for a reason. The Cree spot lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, these CREE LED spotlights are ready to go. This 40w Cree POD light is the perfect Jeep JK windshield lights, and Black Oak created a sick light kit for your off-roading adventures (sold separately). Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Spot lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on duck boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Auxiliary motorcycle lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with spot optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual