General Pump WM4215CL Reverse Osmosis Pump The WM Series Direct Drive Industrial Pressure Washer Pump or Reverse Osmosis Pump. This General Pump WM4215CL has dual inlet and outlet porting. It features the following specs: right hand, 5/8" hollow shaft, 4.2 GPM, 1500 PSI, 1750 RPM   Product Description Reverse Osmosis Pump - Right Shaft This pump is from the General Pump WM Series. It is a reverse osmosis, hollow shaft pump with roller bearings. See Related Products for compatible pump oil. • 316 stainless steel wet-end • 300 Series stainless steel fasteners • Parallel inlet and outlet valve design for efficiency and easy maintenance • Corrosion resistant valve and packing design • Innovative wear resistant high and low-pressure seals • Dual inlet and outlet porting • Anodized crankcase for corrosion resistance • NEMA 56C flange with 5/8” hollow shaft   Technical Specifications Bore: 18 mmStroke: 12.5 mmC rankcase Capacity: 12 oz.Max Temperature: 140º F Inlet Port: 1/2"Shaft Diameter: 5/8"Max GPM: 4.2Max PSI: 1500 RPM: 1750

General Pump WM4215C Reverse Osmosis Pump The WM Series Direct Drive Industrial Pressure Washer Pump or Reverse Osmosis Pump.   Hollow Shaft – General Pump WM Series Specs:   Reverse Osmosis Pump - Left Shaft Max. Inlet Pressure 50 PSI Max. Fluid Temperature 140 Degrees Fahrenheit Inlet Port Thread 1/2in. NPT/F Discharge Port Thread 3/8in. NPT/F Shaft Diameter 5/8in. Pump Dimensions 9.9in. x 7.5in. x 6.0in. Crankcase Oil Capacity 12 oz (use GP Series 100 Oil)     Hollow Shaft – General Pump WM Series Features: 316 stainless steel fluid end for superior corrosion protection. Solid ceramic plungers with advanced surface finish assure durability and longevity. Compact design offers solutions to space limitations. Parallel inlet and outlet valve design for efficiency and easy maintenance.  

General Pump WM4215CL Reverse Osmosis Pump with Motor This General Pump WM4215CL has dual inlet and outlet porting. Features 316 Stainless Steel wet-end and 300 Series stainless steel fasteners, and has a new generation seal system that allows for a longer life. Produces up to 4.2 GPM, at up to 1500 PSI.   Solid ceramic plungers with advanced surface finish assure durability and longevity. Compact design offers solutions to space limitations. Parallel inlet and outlet valve design for efficiency and easy maintenance. NEMA 56C flange with 5/8” hollow left side shaft Corrosion resistant valve and packing design Innovative wear resistant high and low-pressure seals Dual inlet and outlet porting Anodized crankcase for corrosion resistance   Specifications: Max Volume: 4.2 GPM Max Discharge Pressure: 1500 PSI Max Pump Speed: 1750 RPM Max Inlet Pressure: 50 PSI Motor is a 10W18BCT   We build these at time of order. Please see the Literature for pump and motor specs.

SHURflo 8005-952-480 Diaphragm Pump Reverse Osmosis Booster Pump SHURflo Diaphragm Pump 3 Chamber, 21.8 GPH Open Flow, 24/36VDC Continuous Duty, 80 to 100 PSI Bypass (no switch), EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports   SHURflo 8000 Series RO Pumps are the most widely used pumps for RO. They are ideal for high pressure / low flow applications with low amp draw. They can be mounted in any position, are compact, and are designed for long trouble-free life.

General Pump 650021 Slinger Brass General Pump 650021 is a replacement slinger for WM Series reverse osmosis pumps.

Raritan CPII PUMP Compact Ii Pump Assy

Reverse Osmosis Pumps The purpose of the reverse osmosis booster pump is to increase water pressure going into the RO unit. This process requires that a high pressure be exerted on the high-concentration side of the membrane, usually 30 – 250 psi for fresh and brackish water, and 600 – 1200 psi for seawater.

SHURflo 80-120-01, Reverse Osmosis Booster System 220VAC The Shurflo 80-120-01 Pump is used for home RO water systems. It is a enclosed reverse osmosis booster low voltage motor. 220 Volts AC Input 80 PSI bypass valve Up to 50 GPD Continuous Duty 0.25" quick connect fitting

Thanks to over forty years of marine pump experience, Johnson Pump knows the boating industry well. That's why so many boat owners and leading manufacturers of marine engines and recreational craft trust Johnson Pump brand to provide solutions for all their pumping needs. Johnson Pump's products for pleasure and commercial craft are sold all over the world through a network of authorized distributors and affiliated retailers like CLR Marine.   No matter whether you are an experienced boater looking for a replacement pump or a manufacturer specifying pumps for your marine application, we are prepared to provide you with the support you need. And no matter where you work or live, access to our products, services, spare parts and support are never far away. In fact, you will find SPX FLOW's Johnson Pump marine brand represented in every major industrial country of the world today and in more than sixty nations altogether. If you have a problem remember CLR Marine ships Worldwide.   The fine finish and thought-through design of these toilets is remarkable. Made from white vitreous porcelain and with corrosion resistant parts throughout, the AquaT is quiet and easy to clean. The silent electric model is shipped with a well-proven Aqua Jet diaphragm pump. The AquaT is far from ordinary. Quiet, hygienic and reliable, the AquaT marine toilet is perfect for almost any marine toilet room.       Specials    Closeouts   Remanufactured    Rebates

  Heavy Duty Bilge Pump 2200 Series - 12V The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design.     FREE Automatic Switch AS888 For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. The AS888 attaches to any SPX Johnson Pump Marine bilge pump through the clip on "T-slot" and can be used with 6, 12, 24 or 32V systems. Use AS888 for a better and safer life afloat!       Specials     Rebates    Close Outs     Remanufactured  

    Thanks to over forty years of marine pump experience, Johnson Pump knows the boating industry well. That's why so many boat owners and leading manufacturers of marine engines and recreational craft trust Johnson Pump brand to provide solutions for all their pumping needs. Johnson Pump's products for pleasure and commercial craft are sold all over the world through a network of authorised distributors and affiliated retailers.     No matter whether you are an experienced boater looking for a replacement pump or a manufacturer specifying pumps for your marine application, we are prepared to provide you with the support you need. And no matter where you work or live, access to our products, services, spare parts and support are never far away. In fact, you will find SPX FLOW's Johnson Pump marine brand represented in every major industrial country of the world today and in more than sixty nations altogether.       Specials    Closeouts    Remanufactured    Rebates

SHURflo 80-120-00 The 115 volt Shurflo 80-120-00 Home RO water system Pump. This RO booster systems is ideal for household use. Equipped with a high quality, continuous duty pump that provides a constant flow of feed water to the membrane, yet maintains quiet operation.   Up to 50 GPD 115VAC Input Safe Low Voltage Motor Continuous Duty 80 PSI Bypass 1/4" Quick Connect Fittings Includes Full Tank Shutoff Switch

Cat Pump 3520 35 Pfr Pump 35Gpm 2K Psi CAT Pumps 3520 is a triplex plunger pump designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Perfect for use in continuous duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and more. Exclusive high pressure seal design means seals are lubricated and cooled by the solution being pumped. Features 304SS valve assemblies and NBR (Buna-N) seals and O-rings. Dimensions:  23.86 X 18.11 X 9.72 Features Triplex design delivers high efficiency and low pulsation. Durable dual V-Packings are lubricated and cooled by pumped liquid. Pre-set Lo-Pressure seals provide secondary protection against external leaks and require no packing adjustments. Special high-density, polished, concentric plungers provide a true wear surface and extended seal life. Specially formulated Seals and V-Packings offer unmatched performance and extended life. Interchangeable inlet and discharge valves for easy servicing. Wet-end easily serviced without entering crankcase. Specifications Maximum Flow: 25 GPM Maximum Pressure: 2000 PSI Maximum Temperature: 140° F RPM: 870 Inlet Port: 1.5" NPT-F Outlet Port: 1" NPT-F

March AC-5C-MD Reverse Osmosis Feed Pump 115 Volt Applications for the AC-5C-MD Magnetic Drive Pump include chemical recirculation, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioners. March Pump's industrial AC-5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 1 feet, and its maximum head is 27 Feet (or around 11PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   Max Flow 17 GPM 60 LPM Max Head 27 FT 6 M Power .125 HP .093 KW Electrical 115V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 1/2"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washers), Ceramic Magnet   Available with 750 Priming Chamber

March AC-5C-MD Reverse Osmosis Feed Pump 230V Applications for the AC-5C-MD Magnetic Drive Pump include chemical recirculation, refrigerators, small scrubbers, detergent mixers, computer cooling, carbon arc furnace cooling, and marine air conditioners. March Pump's industrial AC-5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 17 gallons per minute at 1 feet, and its maximum head is 27 Feet (or around 11PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 1 inch female pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit. The March AC-5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   Max Flow 17 GPM 60 LPM Max Head 27 FT 6 M Power .125 HP .093 KW Electrical 230V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 1/2"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic (Shaft, Thrust Washers), Ceramic Magnet