The Snubber - New Line Now At CLR Marine. The Snubber product line includes a Snubber Twist mooring compensator, Snubber Fender fastener, and Snubber Pull rope for pulling and lifting. The new product line is designed to be innovative and easy to use for all boaters. All Snubber products are made in Finland for domestic and global customers. The Snubber offers a simple, safe, and high-quality customer and user experience.     The Snubber - Product Line  Snubber FENDER - Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat. Snubber TWIST - Snubber TWIST is a patented mooring compensator that absorbs the mooring line’s shocks and reduces the stress on your boat and the dock.   Snubber PULL - Two products with one click. Snubber PULL is a comfortable pulling rope for a rowboat or any small vessel. Securely attach the rope in a few seconds.       Specials    Closeouts    Remanufactured    Rebates

Anchoring & Docking Are you heading out on the water? Make sure you have a great boat anchor onboard. Having an anchor on standby is the easiest way to ensure you are safe. If your engine dies, you need an anchor to hold you in place while making repairs.  If you want to get out into the current, you need an anchor to keep you in place while fishing or swimming. We have the right anchor for your boat.   Your boat is not a bumper car. To protect your investment and keep your boat looking good, make sure you have boat fenders. When it comes to docking, the risk of rubbing or bumping increases unless you are prepared to prevent it Choose from our wide range of fenders and dock bumpers to ensure your boat is docked safely without a single scratch.

The Snubber The Snubber product line includes Snubber Twist mooring compensator, Snubber Fender fastener, and Snubber Pull rope for pulling and lifting. The new product line is designed to be innovative and easy-to-use for all boaters. All The Snubber products are made in Finland to domestic and global customers. The Snubber offers a simple, safe, and high-quality customer and user experience.

FX-7 Complete Anchoring System Whether used as a primary anchor or conveniently-stowed backup, Fortress Marine Anchors are well-known for their exceptional holding capability.   This Complete Anchoring Systems has it all.  Two large, precision-machined and sharpened flukes ensure that Fortress anchors set fast and dig deep.  Unlike others, they’re easily adjusted from a 32° angle for use in sand and clay to 45° for soft mud.  Unique Mud Palms are included to optimize setting performance in problem soft bottoms.   Also included is 15′ of 1/4″ G-30 chain that is spliced to 250′ of shock- absorbing 3/8″ three-strand nylon rope and a 1/4″ shackle. *For boats up to 27' (8 M)  *Made in the U.S.A. In the box: Fortress FX-7 anchor 1/4" Shackle 15' of G-30 1/4" Chain 250' of 3/8" three-strand nylon rope Safe anchoring guide *Sold as an Individual

FX-11 Complete Anchoring System Whether used as a primary anchor or conveniently-stowed backup, Fortress Marine Anchors are well-known for their exceptional holding capability.   This Complete Anchoring Systems has it all.  Two large, precision-machined and sharpened flukes ensure that Fortress anchors set fast and dig deep.  Unlike others, they’re easily adjusted from a 32° angle for use in sand and clay to 45° for soft mud.  Unique Mud Palms are included to optimize setting performance in problem soft bottoms.   Also included is 15′ of 1/4″ G-30 chain that is spliced to 250′ of shock- absorbing 3/8″ three-strand nylon rope and a 1/4″ shackle. *For boats up to 32' (10 M)  *Made in the U.S.A. In the box: Fortress FX-11 anchor 1/4" Shackle 15' of G-30 1/4" Chain 250' of 3/8" three-strand nylon rope Safe anchoring guide *Sold as an Individual

Mooring Snubber Kit with 3/8" x 20' Dock Line This flexible snubber stretches to absorb shock and protect boats, cleats, and lines from the strain of wind and water. The resilience of the snubber can be adjusted to conditions by increasing or decreasing the amount of line wrapped around it. Includes snubber and 20 ft. of solid braided multifilament polypropylene dock line. Specifications: Thickness (inch): 3/8" Length (feet): 20' Color: Blue

FX-16 Complete Anchoring System Whether used as a primary anchor or conveniently-stowed backup, Fortress Marine Anchors are well-known for their exceptional holding capability.   This Complete Anchoring Systems has it all.  Two large, precision-machined and sharpened flukes ensure that Fortress anchors set fast and dig deep.  Unlike others, they’re easily adjusted from a 32° angle for use in sand and clay to 45° for soft mud.  Unique Mud Palms are included to optimize setting performance in problem soft bottoms.   Also included is 15′ of 1/4″ G-30 chain that is spliced to 250′ of shock- absorbing 3/8″ three-strand nylon rope and a 1/4″ shackle. *For boats up to 38' (12 M)  *Made in the U.S.A. In the box: Fortress FX-16 anchor 1/4" Shackle 15' of G-30 1/4" Chain 250' of 3/8" three-strand nylon rope Safe anchoring guide *Sold as an Individual

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand Nylon The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock) The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand Nylon The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock) The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice. Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

MAXSET Stainless Steel Anchor - 13lb The "MAXSET" stainless steel (AISI 316) anchor is based on the proven `Plough' design.

MAXSET Stainless Steel Anchor - 22lb The "MAXSET" stainless steel (AISI 316) anchor is based on the proven `Plough' design.

MAXSET Stainless Steel Anchor - 35lb The "MAXSET" stainless steel (AISI 316) anchor is based on the proven `Plough' design.

Anchor Rode 20' - 7mm Chain - 100' - 1/2" 3 Plait Rope An anchor-rode is the connection system between the anchor and the boat and its sturdiness during mooring is undoubtedly essential. The critical point is the splice where the rope and chain are connected. Quick has developed a slim splice system that is much slimmer and more tapered, preventing jamming which often occurs during the transition from rope to chain during anchoring. Quick Slim Splice consists of a calibrated chain and a top-quality 3-strand polyester rope, to guarantee optimum strength and life.