|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Fuel Flow Monitor
Part #: FFM100-01
Maretron's FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating cost. The FFM100 uses state-of-the-art, positive displacement metering technology for unprecedented accuracy. In fact, the accuracy of the FFM100 is nearly that of commercial vessel systems costing tens of thousands of dollars, yet the FFM100 cost less than existing recreational systems found on the market today. Additional benefits of the positive displacement metering technology are the elimination of flow conditioning components such as straighteners and pulsation dampers. Other flow meter technologies require flow conditioning components that increase system and installation cost. The FFM100 also uses true temperature compensation with embedded temperature sensors within the meters. The returning fuel is generally hotter than the supply fuel and if not properly compensated, inaccuracies as much as 5% can occur in computing the engine's fuel consumption. The FFM100 also detects momentary reverse flow in the fuel lines due to fluctuating pressure caused by the injection pump. Less accurate systems count the reverse fuel flow as part of the consumed fuel where the FFM100 properly accounts for momentary reverse flow.
Lastly, the FFM100 can be used for fluid types other than fuel (e.g., water, oil, etc.) by ordering the appropriate flow sender.
The FPM100 is NMEA 2000® certified so you can view any and all information anywhere on the vessel using a compatible NMEA 2000® display. The FFM100 is a key component of Maretron's N2KView® vessel monitoring and control system.
Features:
FFM100 converts a variety of flow senders (e.g., fuel, water, etc.) to NMEA 2000® Network Data
All flow senders ordered separately depending on application (i.e., single fuel flow sender for gas engine, dual fuel flow senders for diesel engine, water flow sender for sea water, etc.)
Fuel flow senders facilitates fuel consumption optimization for reduced fuel operating cost
Fuel flow senders use positive displacement metering technology for superior accuracy over other measurement technology such as turbine meters
Fuel flow senders do not require costly fuel conditioning components like flow straighteners and pulse dampers
Fuel flow senders implement true temperature compensation with precision built-in thermistors for increased accuracy
Fuel flow senders automatically detect reverse flow due to fluctuating pressure difference from injection pumps
Fuel flow senders pass particle sizes up to 70 micrometers (diesel fuel filters normally filter down to 2 micrometers to prevent clogging injectors)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
379.20 |
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Yamaha Fuel Line Kit 6' x 3/8"
Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.
Features:
Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade
Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks
Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.14 |
|
|
Fuel/Water Separator
Keep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability.
Features:
Double seal for enhanced performance
Replacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872
|
7.90 |
|
|
Universal Fuel/Water Separator Kit with Bracket
Keep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability and fits all 2 and 4-cycle engines.
Features:
10 Micron Filter and bracket included
Outfitted with 2 brass plugs for secure connections and universal 3/8 inch (.85cm) ports
Double seal for enhanced performance
Replaces Mercury 35-60494A4
|
21.43 |
|
|
Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills
(1324)
Black Plastic with Gasket
Built in Lock Cylinder
Size #0 Fits PERKO Fills 1313 & 1399
Cap Outside Thread Diameter: 1-15/32"
|
31.62 |
|
|
Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills
(1324)
Black Plastic with Gasket
Built in Lock Cylinder
Size #1 Fits PERKO Fills 0520, 0527, 0528, 0557, 0599 and 1270
Cap Outside Thread Diameter: 1-7/8"
|
34.79 |
|
|
Spun Silver Box Set of 6 Gauges f/ Inboard Engines - Speed, Tach, Voltmeter, Fuel Level, Water Temperature & Oil
Packaged and ready for the display counter. This 6 gauge boxed set offers a complete set of gauges ready to install.
Boxed Set Includes:
Tachometer (0 to 6000 RPM)
Speedometer (0 to 55 MPH)
Fuel Level (E to F)
Voltmeter (10 to 16 AMPS)
Water Temperature (100 to 250° F)
Oil Pressure (0 to 30 PSI)
Factory P/N KTF0184
*Sold as a Box Set
**Gauge Covers not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
266.64 |
|
|
PleasureCraft Marine RP061022 Impeller for Raw Water Pump
Impeller for 2003 and newer PCM engines using Serpentine belt and PCM water pump
Not for v-belt systems!
Fits Crusader and Pleasurecraft Marine PCM 5.0 , 5.7, 6.0 & 8.1 models with serpentine belt driven water pumps.
Will not for V-belt systems.
Replaces : Crusader and Pleasurecraft R061022 , RP061022 , Sierra 18-8926 , Mallory 9-45718
|
57.47 |
|
|
Euro Black 4" Multifunction Gauge - Volt/Fuel/Oil/Water Temperature
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Multi-Function Gauge Displays:
Fuel (E to F)
Volts (10 to 18 AMPS)
Oil Pressure (0 to 80 PSI)
Water Temp. (120 to 220° F)
4" Gauge - Hole size: 3.4" (86.36 mm)
Features:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GF0001
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
103.12 |
|
|
HOT FOOT™ Universal Original Foot Throttle for All Marine Engines
Now compatible with all Mercury 175-300 Pro XS outboard motors
The Original and ONLY real HOT FOOT™ Throttle
Drive your boat safer by driving it like your car. This is the one and only HOT FOOT™ throttle - the original boat foot throttle that has been on the market for 30+ years.
This throttle allows you to drive your boat like you do your car. You keep both hands on the wheel and control the throttle with your foot. The throttle returns to idle if you remove your foot. This throttle is a must-have for safe operation of high performance boats.
Features:
Drive your boat like you drive your car -- features make driving your boat fun and safe
Number one throttle on the market for over 20 years
Provides added safety and performance
Improves throttle control for all outboard and inboards
All cast aluminum and stainless steel hardware
Lightweight and resistant to corrosion
Stainless steel hardware and non-sticking teflon and nylon bearing surfaces for trouble free operation
Nylon and teflon bushings on all critical pivot points
Stainless steel spring returns engine to idle position when released
Equipped with toe clip for additional safety in extreme operating conditions
Uses standard control cables for easy hook-up (longer throttle cable not included)
Mounts directly to floor of boat with four screws (not included)
Patented Idle Stop for FICHT and Optimax Engines
Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
171.44 |
|
|
Jabsco 29450-1701 Pump for Perkins Marine Engine
Pump Body: Bronze
Port Size: 3/4" (20mm) Horizontal Hose Ports
Impeller: Neoprene
3/4" (20mm) hose ports, 'hot stamp' body with integral cam, 4 bolt flange mount, 3 screw end cover, shaft drive end has screw thread and taper.
For Perkins Marine and others.
|
582.89 |
|
|
Jabsco 5660-0001 Gray Marine Engine Pump
|
652.41 |
|
|
Cockpit Marine 52MM (2-1/16") Water Temp. Gauge - 0-250°F - White Dial/Chrome Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio.
Features:
100 - 250°F Range
Works with all 450-29 OHM common marine temperature senders
For 12V electrical systems
Mounting Hardware Included
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.43 |
|