|
F2 Trailer Winch 1,600 lbs
Features:
F2 Winch
1,600 lbs.
Comes with strap
Sharkskin Finish
Limited Lifetime Warranty
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
181.09 |
|
|
1,100 lbs. Single Speed Winch with 20' Strap
Single Speed Trailer Winches
We manufacture a full line of Fulton brand single speed winches designed to meet your toughest pulling demands. Our winches feature efficient gear ratios, full-length drum bearings, oil-impregnated shaft bushings, and or "Comfort Grip" handle of ease of cranking. All gears are high-carbon steel for superb strength and long-term durability. Stamped carbon steel frames provide rigidity for gear alignment and longer cycle life. Zinc finishes provide excellent corrosion resistance in all environments. All models are designed for use with rope or strap. For end user convenience, most models are available with factory installed straps and hooks.
Specs:
Capacity (lbs.): 1,100
Handle Length: 7"
Gear Ratio: 4.1:1
Rope: 30' x 5/16" (Not Included)
Strap: 20' x 2"
Strap Included: Yes
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
65.86 |
|
|
F2 Trailer Winch
Fulton's 3,200 lbs. capacity winch will complement the look of even high end boat and trailer combinations and continues the industry-changing improvements in both performance and style of the Fulton F2 series of products. Its clean, high-tech look is sleek and powerful.
Features:
Completely enclosed stylish design - compliment your boat and customize your trailer's styling
Precision fit components eliminate tightening or replacement
Maintenance free - designed to eliminate the need for lubrication or maintenance
Corrosion-resistant coating resists damage from moisture and salt
Corrosion-resistant one-piece aluminum frame and one-piece aluminum handle
Operates smoothly with reliable solid drive gear and powerful dual gear drum
Center drive enclosed ratchet system
User-friendly pull-turn knob to engage ratchet plunger pin
Adjustable-length soft grip handle, switches from left- to right-hand drive configuration
3200 lbs. capacity
Includes 21' strap with hook
Standard mounting bolt pattern, mounting hardware included (footprint 8"Hx6.5"Wx9.5"D)
Features E.I.S. - Easy Install System
CE Compliant
LIMITED LIFETIME WARRANTY
Specs:
Capacity: 3,200 lbs.
Warranty: Limited Lifetime
Speed: 2
Weight Carrying: 3200 lbs
Strap Included: Yes
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
274.39 |
|
|
F2 Trailer Winch
Fulton's trailer winch continues the industry-changing improvements in both performance and style of the Fulton F2 Series of Products
Stylish Design
The introduction of the F2 Winch addresses the need for attractive design in every element of a marine trailer. This winch will complement the look of even high end boat and trailer combinations. It's clean, high-tech look is sleek and powerful
Maintenance Free
Designed to eliminate the need for lubrication or maintenance, the F2 Winch's components are precision fit to eliminate the need for tightening or replacement. Corrosion-resistant coatings cover internal and external components so they will hold up in salt water and other harsh environments
Rigorously Tested
Misuse and abuse are common to all products used in the great outdoors. Our design team tested every aspect of the F2 Winch's Performance and exposed it to the harshest working environments we could think of. The superior materials and coatings held up every time, allowing us to offer an unprecedented limited lifetime warranty
Erogonomic Design
Featuring a "soft touch," adjustable-length handle and ergonomic function, we've worked hard to ensure that every moving part will operate smoothly and with the least amount of effort
Strong. Durable Construction
The F2 Winch has been tested far beyond its rated capacity for superior performance
Adjustability
Handle adjusts from 6" - 9," balances torque, speed, and clearance. Switches from left to right handed drive configuration with ease.
Specs:
Capacity (lbs.): 2,000
Gear Ratio: 5.1:1
Strap: 20' x 2"
Strap Included: Yes
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
203.05 |
|
|
F2 Trailer Jack Bolt-On 2,000 lbs.
Fulton's 2,000 lbs. Lift Capacity Adjustable Swivel with Footplate Jacks pack all of the features of the award winning Twin Track & Wide Track models, along with unprecedented Limited Lifetime Warranty. The 2,000 lbs. Capacity Jacks posess the following features.
Features:
Heavy Duty Articulating Footplate - 7" diameter cast footplate provides superior stability. Unique ball and socket connection between jack and footplate allows for whatever articulation is required to accommodate uneven surfaces
13" of swivel mount height adjustment
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
318.29 |
|
|
F2 Wide Track Jack
Includes Handle Hold-Up & Wheel Wedge Features, & Bolt-On Mounting Hardware for 3" x 3" & 3" x 4" Frames
Fulton's F2 is designed for use with marine, recreational and utility trailers, continues that Fulton heritage of innovation rethinking every feature and challenging industry conventions. The result is a reengineered high quality product that will transform the industry. It's so strong and reliable that Fulton is backing it with an unprecedented Limited Lifetime Warranty.
Features:
Maintenance free - designed to eliminate the need for lubrication and maintenance.
Corrosion resistant coatings cover internal and external components - will hold up in salt water and other harsh environments.
Ergonomic design - crank, release pin and integrated wheel wedge are made of strong, engineered plastic for a comfortable touch.
Stylish design - compliment your boat and customize your trailer's styling.
Sealed and lubricated one-piece gearbox.
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
291.54 |
|
|
F2 Twin Track Jack
Includes Handle Hold-Up & Wheel Wedge Features, & Bolt-On Mounting Hardware for 3" x 3" & 3" x 4" Frames
Fulton's F2 is designed for use with marine, recreational and utility trailers, continues that Fulton heritage of innovation rethinking every feature and challenging industry conventions. The result is a reengineered high quality product that will transform the industry. It's so strong and reliable that Fulton is backing it with an unprecedented Limited Lifetime Warranty.
Maintenance free - designed to eliminate the need for lubrication and maintenance.
Corrosion resistant coatings cover internal and external components - will hold up in salt water and other harsh environments.
Ergonomic design - crank, release pin and integrated wheel wedge are made of strong, engineered plastic for a comfortable touch.
Stylish design - compliment your boat and customize your trailer's styling.
Sealed and lubricated one-piece gearbox.
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
301.82 |
|
|
1800lb Single Speed Winch - Strap Not Included
Winch, 1800lbs, Single-Speed
We manufacture a full line of Fulton brand single speed winches designed to meet your toughest pulling demands. Our winches feature efficient gear ratios, full-length drum bearings, oil-impregnated shaft bushings, and our "Comfort Grip" handle for ease of cranking. All gears are high-carbon steel for superb strength and long-term durability. Stamped carbon steel frames provide rigidity for gear alignment and longer cycle life. Zinc finishes provide excellent corrosion resistance in all environments. All models are designed for use with rope or strap.
Specs:
Capacity (lbs.): 1,800
Handle Length: 8"
Gear Ratio: 4.1:1
Rope: 20' x 7/16" (Not Included)
Strap: 20' x 2" (Not Included)
Strap Included: No
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
83.75 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 28ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 28ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 28ST Winch - 24V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 28ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 34ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 34ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 34ST Winch - 24V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 34ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 40ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 40ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 40ST Winch - 24V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 40ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|
|
E1 Single Speed Electric Motor Conversion Kit for 46ST Winch - 12V
The E1 Single Speed electric motor is a high quality European engineered and manufactured series wound motor. Carefully matched with the optimal gearbox they deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. The motors are available in 12 Volt and 24 Volt models providing smooth and quiet operation across a wide working load range.
Electric conversion kits are delivered mounted to a stainless steel winch/deck connection plate and have everything you need for do-it-yourself mounting including installation manual, push button, cables and an RA582000 push button.
This conversion kit fits an Andersen 46ST winch
** Before ordering, please contact us to ensure your Andersen Winch is compatible with this Conversion Kit. Refer to the Winch Product Version Number when inquiring or ordering powered Conversion Kits. The production year, month and version no. [YY-MM-VER.] are stamped on the top side of the deck flange, between the mounting bolt holes. You’ll find it, when the polished winch drum is removed. **
|
2599.52 |
|