|
Leveling Block Jack Stand
The Camco Tongue Jack Stand evenly distributes the weight of the trailer tongue while providing stability and support. It can fit between a 2-inch and 6-inch-diameter tongue jack and also adds additional support for slide-out supports. The Tongue Jack Stand interlocks with Camco leveling blocks and can also be used with most brands of leveling blocks.
Small and easy to store, the tongue jack stand measures 8.43 inches x 8.43 inches x 1.48 inches. It has a weight rating of 3,500 lb. and is constructed of UV-stabilized polypropylene. Made in the USA. Patented.
Features:
Distributes Weight Evenly: Evenly distributes the weight of your trailer tongue while providing stability and support
Compatibility: Fits between a 2-inch and 6-inch diameter tongue jack; also adds additional support for slide-out supports
Versatile Fit: Interlocks with Camco leveling blocks and can also fit other brands of leveling blocks
Weight Rating: 3,500 lb.
Small and Easy to Store: Measures 8.43 x 8.43 x 1.48 inches
Durable Construction: Constructed of UV-stabilized polypropylene; Made in the USA: Product is made in the USA; Patented
|
4.91 |
|
|
FasTen Leveling Blocks with T-Handle - 2x2 - Yellow *10-Pack
The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.
Features:
10 interlocking blocks stack to the desired height for customizable leveling
Carrying handle easily twists to secure blocks together for storage
Strong and durable construction
Safe and easy to use
Compatible with Camco Leveling Blocks
|
38.92 |
|
|
FasTen Leveling Blocks with T-Handle - 2x2 - Brown *10-Pack
The Camco FasTen Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Camco’s FasTen Leveling Blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handles easily pull up for carrying or twist down to secure blocks together for storage. Product dimensions: 8.5” x 8.5” x 1”. Stack height should not exceed 4-1/2 inches.
Features:
10 interlocking blocks stack to the desired height for customizable leveling
Carrying handle easily twists to secure blocks together for storage
Strong and durable construction
Safe and easy to use
Compatible with Camco Leveling Blocks
|
45.04 |
|
|
FasTen Leveling Blocks XL with T-Handle - 2x2 - Grey *10-Pack
The Camco FasTen XL Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. The larger size has an increased weight capacity of blocks individually and in a stack, and also provides more surface area for leveling. Each block adds a full inch to stack height. Camco’s FasTen XL Leveling Blocks can be used with single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handle secures blocks together for storage and easily pulls up for carrying, or pushes down for more compact storage. Individual block measures: 10.5” x 10.5” x 1.5”. Stack height should not exceed 4-1/2 inches.
Features:
The larger 10.5” x 10.5” design withstands more weight and creates more surface area for leveling
10 interlocking blocks stack to the desired height for customizable leveling
Carrying handle easily twists to secure blocks together for storage
Strong and durable construction
Safe and easy to use
|
46.22 |
|
|
Series 40 Ball Bearing Orbit Block - Single - Stand-Up Swivel Head
Features:
Ultra Lightweight
Low friction 2-stage Orbital ball bearing system
Highest working load in its class
Low profile and compact
High performance cleating
Swivel shackle head for unlimited block rotation -grade 316 stainless steel.
Stainless steel shackle head for ultimate durability with harsh fixing points.
Lightweight
Kilogram for kilogram of working load, BB and RT Orbit Blocks™ are the world’s lightest. The unique orbital design allows the bearing to only be in the active areas of the floating sheave. This minimizes the mass of the inactive return race and hub.
Weight and bulk are further reduced in the different block configurations. The ball bearing single and becket block has a through-sheave becket arrangement. The result? The lowest weight possible.
Multi-sheave blocks have only single intermediate cheeks and an ultra-light and efficient head arrangement. This gives a 30% weight saving advantage over the nearest competitor. Other brands just link together their single blocks. This results in unnecessary double cheeks between each sheave, held together by a heavy steel channel across the top of the block.
Highest Working Load In It's Class
The orbital ball-bearing arrangement gives the largest possible bearing race diameter. This maximizes load performance. The proven Ronstan 2-stage bearing system features high compression grade acetal ball bearings and a secondary full-contact bearing. This gives minimum friction across the full working load range.
The floating sheave and bearing system is supported by a fiber-reinforced load frame. The design was computer modeled to be stress optimized.
Recommended fasteners - 2 x 4mm (5/32") countersunk head screws
Applications:
Mainsheet systems on spinnaker sheet on dinghies to 5m (16ft)
Spinnaker sheets on dinghies, sportsboats and small keel boats to 5m (16ft)
Halyard, vang and backstay applications on boats to 8m (26ft)
Control line applications on larger yachts
Materials:
Ball Bearings - High compression strength carbon black Acetal.
Stage 2 Bearing - Glass fiber reinforced, MoS2 impregnated Nylon
Frame/Cheeks - Toughened, glass fiber reinforced Nylon
Sheave - Carbon fiber reinforced, PTFE impregnated Nylon
|
35.98 |
|
|
Heavy Duty Trailer Dock/Jack Stand Pad
Features:
For use with trailer pad or wheel jack stand
Handles trailers for boats, snowmobiles, motorcycles, personal water craft, towables, RV/Campers
Use on variety of surfaces
Works on concrete, asphalt, sand, rock, dirt, grass - even muddy locations
Lifetime warranty from cracking or breaking
Tough enough to drive over guaranteed not to crush, crack, or break down
Use Trailer Dock anywhere
Can be used at camp site, driveway, garage, parking lot storage location or beach
Lightweight
Bring it along - it even floats
Replaces those worn 2 by 4's
No more sinking in the mud and no dents in the driveway
Easy lift with the rope handle
|
25.87 |
|
|
Series 40 All Purpose Block - Single - Stand Up
All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.
Features:
Exceptionally high working loads
Low maintenance, long service life
Self-lubricating sheave
Captive Lock™ universal head
Mount with 2 x 5mm (3/16") fasteners (not supplied)
Applications:
Mainsheet
Halyard
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26')
Materials:
U.V. stabilized Acetal sheaves
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Grade 316 stainless steel bearing race
Grade 316 stainless steel load strap and head fitting
Specifications:
Sheave Ø: 40mm(1-9/16")
Max. Rope Ø: 10mm(7/16")
M.W.L.: 400kg(880lbs)
B. L.: 800kg(1,760lbs)
Weight: 72g(2.5oz)
|
25.69 |
|
|
Series 50 All Purpose Block - Single Stand Up
Features:
Exceptionally high working loads
Low maintenance, long service life
Self-lubricating Acetal polymer sheave ensures low friction and extreme durability
Captive Lock™ universal head
Slotted pin shackle eliminates fouled lines
Mount with 2 x 5mm (3/6") fasteners (not supplied)
All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Quick adjusting cleat arms require no tools to adjust and fix securely in position. Becket pin is removable so line can be spliced prior to fitting.
Applications:
Mainsheet and halyard applications, vang and spinnaker control lines on boats to 10m (33ft)
S60 - on boats up to 12m (40ft)
Typically used in direct 4:1 purchase systems such as mainsheets and boom vangs
On larger boats they are used for fine-tune mainsheet tackles, outhauls, cunninghams, checkstays, genoa lead pullers and traveller controls.
Materials:
Grade 316 stainless steel load strap
Impact and UV resistant, fiber reinforced Nylon cheeks
|
36.82 |
|
|
Series 40 Ball Bearing Block - Single - Stand Up
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.
Features:
Low friction Acetal or Torlon® bearing system
Lightweight
Cheek cut-outs for easy bearing maintenance
Captive Lock™ universal head
High static and dynamic load capacity
Applications:
Mainsheet
Halyard
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26')
Materials:
U.V. Stabilized Acetal sheaves
Acetal ball bearings
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Grade 316 stainless steel load strap and head fitting
Specifications:
Sheave Ø: 40mm(1-9/16")
Max. Rope Ø: 10mm(7/16")
M.W.L.: 350kg(770lbs)
B. L.: 800kg(1,7600lbs)
Weight: 71g(2.5oz)
|
31.68 |
|
|
Series 20 Ball Bearing Block- Single, Stand-Up Loop Top
Features:
Low friction
High static and dynamic load capacity
Lightweight
Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction.
Applications:
Dinghy control lines
Dinghy vangs
Cunninghams
Traveler controls
Materials:
Stainless steel ball bearings
UV stabilized Acetal sheave
Grade 316 stainless steel load strap and head fitting
Impact and UV resistant, fiber reinforced Nylon cheeks
|
16.27 |
|
|
RV Stabilization Kit with Duffle Deluxe *14-Piece Kit
The Camco Big Bag RV Stabilization Kit is a 14-piece kit that includes everything you need to stabilize your RV or trailer. Each stabilization piece is made of durable, UV-stabilized resin and is easy to use. The kit includes (2) tri-levelers for customizable leveling, (2) wheel chocks to help keep your trailer in place, (4) regular and (2) large stabilizing jack pads that help prevent jacks from sinking into the soft ground, (2) wheel stops that lock into tandem tires to prevent movement while parked or re-hitching, (1) tongue jack stands to evenly distribute the weight of the tongue and (1) heavy-duty duffel for convenient storage.
Features:
Complete RV Stabilization Kit: This 14-piece kit includes everything you need to level and stabilize your RV or trailer
Durable Construction: Each stabilization piece is made of durable, UV-stabilized resin
Includes: (2) tri-levelers, (2) wheel chocks, (4) stabilizing jack pads, (2) large stabilizing jack pads, (2) wheel stops, (1) tongue jack stand, and (1) heavy-duty storage duffel
Convenient Storage: The heavy-duty storage duffel provides convenient storage
Easy to Use: All items are simple to use
|
122.47 |
|
|
Series 25 T-Track - Composite Slide - Series 40 BB Orbit Block? 153; - Stand Up - Suits 9mm(5/16") Rope
For small keel boats and sportsboats T-track jib leads are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment.
Lightweight
Composite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fiber equivalents. The car design has been modelled and optimised using finite element analysis and rapid prototyping techniques to achieve maximum strength-to-weight characteristics. Orbit Block™ models use a Dyneema® Link which is 10 times stronger and lighter than steel, to provide the articulated connection between block and car.
Integrated Functionality
The clever 2-piece car body is molded from a composite material that delivers low friction on the alloy track without the need for separate inserts. It also provides the required mechanical strength without the weight and corrosion drawbacks of metal parts. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories.
Low Profile and Compact
Sleek styling and the positioning of the attachment pin provide a low lead aft for the lead block. The Dyneema® Link allows full articulation. The plunger stop button has a flush finish and the contoured form of the car eliminates the chance of lines and sails becoming snagged.
Precise Adjustment
The ergonomic plunger stop toggle combined with low friction of the car body allows for easy one-handed adjustment. The toggle is located at the rear of the car for easy access from the cockpit on sports boats and small keel boats. An arrow is located on the side to indicate the position of the stop for repeatable settings. A 'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle.
Features:
Low profile and lightweight
Removable attachment pin to suit either Dyneema® Link or a shackle
Integrated becket for 2:1 headsail sheet systems
Applications:
Headsail sheet leads on boats up to 8M (26').
Materials:
Toughened, glass fibre reinforced Nylon slide.
DSpecifications:
Length: 102mm(4")
M.W.L.: 325kg(715lbs)
B. L.: 700kg(1,540lbs)
Weight: 144g(5.1oz)
|
72.32 |
|
|
Series 40 All Purpose Block - Single - Stand Up
All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Becket pin is removeable so line can be spliced prior to fitting and is ingeniously locked into position without the use of a clevis pin, split ring or tools.
Features:
Exceptionally high working loads
Low maintenance, long service life
Self-lubricating sheave
Snap fit removable becket pin
Spare parts - RF41010 Replacement Becket Pin
Applications:
Mainsheet
Halyard
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26')
Materials:
U.V. stabilized Acetal sheaves
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Grade 316 stainless steel bearing race
Grade 316 stainless steel load strap and head fitting
Specifications:
Sheave Ø: 40mm(1-9/16")
Max. Rope Ø: 10mm(7/16")
M.W.L.: 400kg(880lbs)
B. L.: 1,000kg(2,200lbs)
Weight: 61g(2.2oz)
|
22.25 |
|
|
25mm Shouldered Block
The 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and light.
Features:
When fitted with a lacing eye (25.17), the block will stand up directly and not flop from side to side
This range could be used to create purchasing systems for lifting, garage door mechanisms, storage solutions, etc.
Specifications:
Max Rope: 8mm
Breaking Load: 500kg
|
11.41 |
|
|
Catalyst Flotation Jacket - Red/Black - XXXL
Safety, simplicity, and surefire warmth, all wrapped up in one does-it-all layer that lets you focus on your mission. Modified from the original Floater Coat that started the Mustang story back in the ‘50s, and harmonized across Canada and the US, the Catalyst Flotation Coat gives you the comfort, mobility and range of motion you want with the warmth your long days on the water won’t compromise on.
Kick the inconvenience of changing in and out of your PFD as you navigate on and off board with the PFD integrated directly into one elements-blocking jacket. Keep wind & moisture out with adjustable cuffs at the wrists. Stay covered up as you bend, twist and move with a longer cut that prevents riding up.
The Catalyst Flotation Coat is your ultimate winter layer for the water. Field tested by Coast Guard training crews, fishing lodges and Mustang PRO-staff.
Integrates seamlessly with Catalyst Flotation Bib Pants.
Features:
M-Tech Comfort System provides unparalleled range of motion and mobility
Waterproof, breathable, laminate outer shell with ComfortCuff™ technology
Outer shell is waterproof
Protection from rain and spray without the clammy feeling of traditional flotation jackets
Zippered chest pocket and front slash hand-warmer pockets
Underarm ventilation zippers
Reflective accents for enhanced visibility
Integrated hood with reflective trim
D-ring for engine cut off switch
Certifications:
U.S. and Canadian - UL12402-5 Harmonized Level 70
Technical Specifications:
Color - Red/Black
Size - XXXL
Chest Size - 52" to 56" (132 to 142 cm)
Weight Capacity - ≥ 90 lb (41 kg)
*Sold as an Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
409.19 |
|