RAM® Steel Reinforced 100x100mm VESA Plate with Ball The RAM-D-246U-IN1 consists of a 2.25" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. Features: Steel reinforced square plate features the VESA hole pattern for connection to a wide variety of devices Included D size 2.25" RAM® rubber ball allows for connection to any D size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Ball/Socket Size: D Size (2.25") Materials: Marine-grade aluminum

RAM® 100x100mm VESA Plate with Ball The RAM-E-246U consists of a 3.38" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. This product includes a set of washers intended to reduce the hole sizes in the VESA plate.  Features: Hardware Included: (4) .312" x .187" Shoulder Washers Ball Size: E Size (3.35") Weight Capacity: Standard Use: 15lbs/Heavy-Duty Use: 10lbs Materials: Marine-grade aluminum Weight: 1.94lbs

100x100mm VESA Plate w/2.25" Ball  Square plate features the VESA hole pattern for connection to a wide variety of devices Included D size 2.25" RAM® rubber ball allows for connection to any D size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Overview: The RAM-D-246U consists of a 2.25" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. Hardware Included: (4) .312" x .187" Shoulder Washers Ball/Socket Size: D Size (2.25") Weight Capacity: 6 lbs Materials: Marine-grade aluminum

RAM® Ball Mount with 100x100mm VESA Plate & Large Electronics Plate This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications, additional holes may need to be drilled for proper fit with your electronic device. Features: Hardware Included: (8) .312" x .187" Shoulder Washers Socket-to-Socket Length: 4.975" Ball Size: E Size (3.35") Weight Capacity: Standard Use: 15lbs/Heavy-Duty Use: 10lbs Materials: Marine-grade aluminum Weight: 8.58lbs

100 x 100mm VESA Plate w/1.5" Ball This RAM-246U consists of a 1.5" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner.  Square plate features the VESA hole pattern for connection to a wide variety of devices Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Material:  Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Plate Size: 4.75" x 4.75" Note: The "U" in the part number reflects product packaged in poly bag.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM 1.5" Diameter Ball Mount with Short Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern) The RAM-101U-B-2461 consists of a SHORT double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 3.625" square plate with the VESA hole pattern. The VESA plate contains a 75mm X 75mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM® Round Plate with Ball - 2.25" - D Size Ball - Hole Plate The RAM-D-254-WD1U consists of a 2.25" diameter rubber ball, connected to a 2.5" diameter plate containing 7 holes total: the industry standard 4-hole AMPS hole pattern and a 3-hole 120-degree hole pattern. This component can drill down to any flat surface or connect to any RAM® holder or cradle. The D Size ball is compatible with any other RAM® D Size ball & socket components.  Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" 3-Hole 120-Degree: 1.812" Diameter  Features: Plate Size: 2.5" Diameter Ball/Socket Size: D Size (2.25") Materials: Marine-grade aluminum

RAM® Double Socket Arm with Round Ball Plate - C Size Long  The RAM-103U-D consists of the 1.5" C size diameter ball and socket system with one open socket end; the RAM-201U-D socket arm is the long length at 9.125" end to end with an 8" socket-to-socket length. This mount is designed to be used with any of the C size RAM® Mount bases or cradles with a 1.5" diameter rubber ball. The RAM-202U RAM® Round Plate Ball Base features an industry standard AMPS hole pattern with a 2.5" diameter base and can be used as an adapter to attach a holder, or a mounting drill-down base. Features: 2.5" round plate connects to RAM® device holders containing the universal AMPS hole pattern Includes C size long length double socket arm 9.125" end to end with an 8" socket-to-socket length; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Socket To Socket Length: 8" Hole Pattern: 4-Hole AMPS: 1.181" x 1.496"/3-Hole 120-Degree: 1.812" Diameter Plate Size: 2.5" Diameter Ball Size: C Size (1.5") Weight Capacity: Standard Use: 4 lbs/Heavy-Duty Use: 3 lbs  Materials: Marine-grade aluminum Packaging Type: Poly Bag Weight: 1.85 lbs

RAM Double Socket Arm with Diamond Plate - B Size Medium  This mount consists of the 1.5" C-size diameter ball and socket system with one open socket end; the RAM-201U socket arm is the medium length at 5.69" end to end with 4.66" socket-to-socket length.  This mount is designed to be used with any of the C-size RAM Mount bases or cradles with a 1.5"-diameter rubber ball. The RAM-238U RAM Diamond Ball Base features an industry-standard AMPS 2-hole pattern and can be used as an adapter to attach a holder or a mounting drill-down base. Features: Diamond plate connects to RAM® device holders containing the universal AMPS 2-hole pattern Includes C size medium length double socket arm 5.69" end to end with 4.66" socket-to-socket length; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Socket-to-Socket-Length (inch): 4.66" Hole Pattern (inch): 2-Hole AMPS 1.912" Plate Size (inch): 2.43" x 1.31" Ball Size (inch): C Size (1.5") Weight Capacity (Standard Use): 4 lbs  Weight Capacity (Heavy-Duty Use): 3 lbs Materials: Marine-grade aluminum Weight: 0.88 lb.

RAM Mount 1.5 Inch Ball Double Socket Arm with 2.5 Inch Round Base The RAM Mount RAM-103U mount, with standard arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round Base The RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 Gen2 Touch, HDS-9 Gen3 & HDS Carbon 9 - Carbon Black PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats. Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy to reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted.  PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions.  This protection assures reliability and longevity of your marine electronics. PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution.  RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing. When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance.  This will allow most boat covers to fit over the PedestalPod when not in use. Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. PedestalPods are waterproof housings for marine electronics specifically designed for bass boats. PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your marine electronics from the harshest of wet boating conditions. PedestalPods provide the convenience of height for accessibility and added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20” off the deck and located near the bow and at a 45-degree angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. They keep harsh spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PedestalPod. The heavy duty, black powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look. It provides protection for wires and connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PedestalPods are available pre-cut for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. Constructed out of durable ABS like all Gen3 NavPods, black carbon PedestalPods have the same high gloss finish with UV stability. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods. PedestalPods – Protection, Convenience, Security

RAM 16.75" Long Extension Pole with (2 qty) 1" Diameter Ball Ends The RAP-BB-230-18U consists of a LONG extension pole with 2 1" diameter ball ends. The ball ends are compatible with all 1" ball double socket arms. Dimensions: Pole Length (Ball End to Ball End): 16.75" Features: 1. Extension poles are buoyant, will float if dropped in the water 2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications 3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use 4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch 5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments 6. Lifetime warranty 7. Made in USA Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM TAB-TITE Universal Clamping Cradle for the iPad mini WITH CASE, SKIN OR SLEEVE The RAM-HOL-TAB12U consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB12U is just what you need to get the most out of your tablet. Compatible Devices: Apple iPad mini WITH CASE, SKIN, SLEEVE Apple iPad mini (with Retina display) WITH CASE, SKIN, SLEEVE The Tab-TiteT cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 6.80" minimum to 9" maximum Width: Maximum width to 5.68" Depth: 0.125" minimum to 1" maximum Tab-Tite Cradle Features: Support cups contain open slots to accommodate for tablets of various sizes Back plate can support various size support cups Spring loaded tension provides secure support for your tablet Spring loaded cradle allows for quick release of your tablet High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.