Composite Ball Adapter with AMPS Plate  The RAP-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern.  Material: Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag.

B Size 1" Fishfinder Ball Adapter for the Lowrance Hook2 Series Designed for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect to a variety of compatible RAM mounting solutions. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

RAM Glare Shield Clamp Mount w/Short Double Socket Arm & Round Base Adapter w/AMPs Hole Pattern The RAM-B-177-202U consists of a glare shield clamp base, short double socket arm and round base that contains the universal AMPs hole pattern. This mount is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Mount will attach to flat surfaces with the following dimensions: Min: 4.4mm / 0.17" Max: 28.0mm / 1.12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

1.5" Ball "Rugged Use" Mount f/Garmin echo 200, 500c, & 550c The RAP-101U-G4 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" Ball The RAP-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

B Size 1" Composite Fishfinder Mount for the Lowrance Hook2 Series Designed for light duty salt water use, this B size (1”) composite drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable. Material: High Strength Composite and Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

RAM Double 1-1/2" Ball Adapter Part #: RAM-230U The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

Fishfinder Mount for Lowrance Hook2 Series - 1" Track Mount Designed for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and base to virtually any track system including the RAM® Tough-Track™. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable. T-Bolt Dimensions: .48" x .95" Material: High Strength Composite and Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note: Part number reflects product packaged in a retail bag store shelf display.

RAM Composite Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter The RAP-B-166U consists of a double socket arm, 3.25" suction cup twist lock base and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

Drill-Down Dashboard Ball Base with Backing Plate - B Size Meet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. This part consists of a 1" B-size rubber ball connected to a 2.5" diameter round plate with the universal AMPS hole pattern and one 2.10 x 2.60 in. steel backing plate (hardware included).  Connect a B-size RAM® double socket arm and device holder that's perfect for the use case. RAM®'s patented rubber ball and socket technology dampens shock and vibration and allows for near-infinite adjustment, enabling the perfect viewing and operating angle of your device. Features: 2.5 in. round plate with a B-size 1 in. rubber ball connects to the included 2.10 x 2.60 in. steel backing plate that connects to RAM® components containing the universal AMPS hole pattern Connect a B-size RAM® double socket arm and device holder for your use case; ball and socket technology allows for near-infinite adjustability Components made of powder-coated, marine-grade aluminum, and steel for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Machine Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Product Dimensions (inch): Overall Height: 5.225" Socket to Socket Length (inch): 2.5” Hole Pattern: Round Plate:, 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum and steel Weight: 0.42 lb.

Drill-Down Dashboard Ball Base with Backing Plate - C Size Meet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. This part consists of a 1.5 in. C-size rubber ball connected to a 2.5 in. diameter round plate with the universal AMPS hole pattern and one 2.10 x 2.60 in. steel backing plate (hardware included). Connect a C-size RAM® double socket arm and device holder that's perfect for your use case. RAM®'s patented rubber ball and socket technology dampens shock and vibration and allows for near-infinite adjustment, enabling the perfect viewing and operating angle of your device. Features: 2.5 in. round plate with a C-size 1.5 in. rubber ball connects to the included 2.10 x 2.60 in. steel backing plate that connects to RAM® components containing the universal AMPS hole pattern Connect a C-size RAM® double socket arm and device holder for your use case; ball and socket technology allows for near-infinite adjustability Components made of powder-coated, marine-grade aluminum, and steel for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Machine Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Hole Pattern: Round Plate: 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum and steel Weight: 0.5 lb.

C Size 1.5" Fishfinder Ball Adapter for the Lowrance Hook2 Series Designed for light duty use, this C size (1.5”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect to a variety of compatible RAM mounting solutions. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your boat, kayak or inflatable. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

C Size 1.5" Fishfinder Mount for the Lowrance Hook2 Series Designed for heavy duty fresh water use, this C size (1.5”) aluminum drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your boat, kayak or inflatable. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM Composite Twist Lock Suction Cup Mount w/ Diamond Adapter Description: The RAP-B-166-2U consists of a 2.75" suction cup twist lock base, double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size