RAM 2" Max Width Square Rail Base with 1" Diameter Ball Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 3" Max Width Square Rail Base with 1" Diameter Ball Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" x 3" Rectangle Base w/1" Ball The RAM-B-202U-153 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

RAM 2" x 2.25" Rectangle Base with 1" Ball The RAM-B-202U-225 contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

RAM 1.5" x 2" Rectangle Base with 1" Ball The RAM-B-202U-152 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base, With a 1" x 1.5" 4-hole pattern. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase

RAM 2" x 1.7" Base with AMPs and 1" Ball for the Garmin zumo, TomTom Rider & Urban Rider The RAM-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern. This adapter/base is designed to hold the following devices: Garmin zumo 400 Garmin zumo 450 Garmin zumo 500 Garmin zumo 550 Garmin zumo 660 TomTom Rider 2 TomTom Urban Rider Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

RAM Chrome Motorcycle Brake/Clutch Reservoir Base w/1" Ball The RAM-B-309-1CHU connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The chrome base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1CHU base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58". Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Triple Magnetic 2.5" Round Base with 1" Ball Consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base and triple magnetic base adapter. The 2.5" diameter base contains pre-drilled holes, including the universal AMPS hole pattern. The magnetic base adapter contains 3 rare earth magnets that hold firm to ferrous metals. Simply put this product near the mounting surface and feel it almost jump out of your hand. The composite adapter designed to conceal the magnets is made of durable composite to prevent scratching the mounting surface. Ideally suited for many applications, you're sure to find many ways to use your magnetic mount at work, home, on the go, or at play.

RAM Motorcycle Brake/Clutch Reservoir Cover Base with 1" Ball Offset The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 6.25" X 2" Rectangle Base with 1" Ball The RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The RAM-B-111BU is compatible with the following electronic devices: Garmin GPSMAP 162 Garmin GPSMAP 168 Garmin GPSMAP 175 Garmin GPSMAP 180 Garmin GPSMAP 180C Garmin GPSMAP 182 Garmin GPSMAP 185 Garmin GPSMAP 188 Garmin GPSMAP 232 Garmin GPSMAP 238 Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

Micropump GC-M35.PVS.F Pump Head F Mount Micropump 81379 GC-M35.PVS.F Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81379 constructed of Base Material 316SS, Gear Material PPS (carbon fiber/ptfe) and Shaft Material 316SS.

Cat Pump 30611 Rail Kit 5 Frame Mount pump onto a secure, horizontal base with either rail assemblies or direct mount assemblies. Rail assembly, direct mount assembly or complete mounting assembly not included with pump unless otherwise noted. Use direct mount assembly when mounting block or flat base is used or pulley extends over edge of base.   For Models: 333, 430, 323, 390, 310 - 350S, 311 - 357, 530, 550, 700, 740, 760, 781/K, 784, 786, 31, 45, 60, 5CP2120W-2150W, 5CP3120/3120CSS, 5CP5120-5140CSS, 5CP6120 - 6190, 5CPQ6221 - 6251

RAM 2" x 2.5" Rectangle Base with 1.5" Ball The RAM-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Micropump GA-V21.C8FS.A Pump Head A Mount Micropump 81113 GA-V21.C8FS.A Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. 81113 constructed of Base Material 316SS, Gear Material Carbon Graphite (Pin Drive) and Shaft Material 316SS Pump Series: GA Series Ports/Fittings: 1/8-27 (F) NPT Side Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -46 Max Temperature (°C): 177 Max Diff. Pressure (psi): 40 Displacement (ml/rev): 0.042 Design: Standard Design Gear Set: 0.063/2/48 (0.042ml/rev) Gear Material: Carbon Graphite (Pin Drive) Static Seals: PTFE Base Materials: 316SS Drive Mount: MP Housing Bypass: No Driven: Ferrite Driving Magnet: Not Included High System Pressure: No Bushings: None Shafts: 316SS Gear Trim: None Model: GA-V21.C8FS.A