The RAM-HOL-AP17U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. Compatible Devices (WITHOUT CASE): Apple iPad Air Specifications: Docking Cradle: No Locking Cradle: No Fit's Tablet's WITH Cases: No Fit's Tablet's WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty 6. Made in U.S.A. Material: High Strength Composite

RAM EZ-ROLL'R Model Specific Cradle f/Apple iPad 4, iPad 3 and iPad 2 w/o Protective Case The RAM-HOL-AP15U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure when on the go. Multiple AMPs hole patterns found on the back of the cradle, make it convenient for attaching various mounts for perfect articulation and viewing angles. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The RAM-HOL-AP15U DOES NOT contain the patent pending Uni-Conn™ docking connector; however, an open space is allocated for free attachment to various cable/docking connectors. Specifications/Features Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Multiple attachment hole patterns for convenient articulation and viewing angles 6. Lifetime warranty 7. Made in the U.S.A. Material: High Strength Composite

EZ-Roll’r™ Model Specific Cradle w/Round Base Adapter for the iPad 5th Generation, Apple iPad Air 1-2 & iPad Pro 9.7 The RAM-B-202-AP17U consists of a 2.5" round base adapter, with 1" ball, attached to a high strength composite cradle. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. Cradle Features: Compatible with various iPad cable/docking accessories Patent pending roller design for super smooth placement and removal of the iPad High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: This product is NOT recommended for devices with a Tech Armore Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag.

RAM EZ-ROLL'R Cradle f/Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite

Tab-Lock™ Locking Cradle f/Apple iPad mini 1-3 with Case, Skin & Sleeve The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini WITH skin, sleeve or case. This spring loaded design makes it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. Quickly lock the cradle, keeping your iPad mini secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 6.75" to 8.75" Width: 5.06" to 5.68" Depth: 0.13" to 1" Note: Product consists of holder only. Case not included. Features: 1. Locking mechanism for theft deterrence 2. Support cups contain open slots to accommodate for tablets of various sizes 3. Back plate can support various size support cups 4. Spring loaded tension provides secure support for your tablet 5. Spring loaded cradle allows for quick release of your tablet 6. High strength materials maximize longevity of cradle 7. Full access to all ports 8. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The RAM-HOL-TABL12U is not compatible with the iPad mini 1-3 with LifeProof case. Weight: 1.15 lbs.

RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge Cases The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: 10" Screen Tablets with LifeProof nüüd cases 10" Screen Tablets with Lifedge cases 10" Screen Tablets with heavy duty cases The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 8.75" minimum to 10.75" maximum Width: maximum to 8.25" Depth: maximum to 1.1" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tab-Lock Universal Locking Cradle f/Apple iPad w/LifeProof & Lifedge Cases The RAM-HOL-TABL17U consists of a spring loaded back plate, custom support cups and locking mechanism. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad secure and safe from theft. The RAM Tab-Lock cradle is compatible with the following tablets: 10" Screen Tablets with LifeProof nüüd cases 10" Screen Tablets with Lifedge cases 10" Screen Tablets with heavy duty cases Tab-Lock Cradle Dimensions: Height: 8.75" minimum to 10.75" maximum Width: maximum to 8.25" Depth: maximum to 1.1" Tab-Lock Cradle Features: 1. Locking mechanism for theft deterrence 2. Support cups contain open slots to accommodate for tablets of various sizes 3. Back plate can support various size support cups 4. Spring loaded tension provides secure support for your tablet 5. Spring loaded cradle allows for quick release of your tablet 6. High strength materials maximize longevity of cradle 7. Full access to all ports 8. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

Double Twist-Lock™ Suction Cup Mount w/Tab-Tite™ Universal Spring Loaded Cradle f/Apple iPad 1-4 with or without Light Duty Case The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 8.5" to 11.125" Width: 6.38" to 7.75" Depth: 0.13" to 0.56" Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty 8. Made in the U.S.A. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.8 lbs.

EZ-Roll'r™ Cradle for Apple iPad Pro 11" The RAM® EZ-Roll’r™ cradle for the iPad Pro 11” secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.  Features: Compatible with various iPad cable/docking accessories Roller design for super smooth placement and removal of the iPad Pro High strength materials maximize longevity of cradle Full access to all ports and buttons Lifetime warranty Specifications: Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag

RAM® EZ-Roll'r™ Cradle for Apple iPad mini 6 The RAM® EZ-Roll’r™ cradle for the iPad mini 6 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure it into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™ cradle also features two attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil. Features: Form-fit cradle for iPad mini 6 provides a perfect fit for your device without a case Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Lifetime warranty Specifications: Hardware Included: (4) #8-32 x 5/8" Machine Screws, (4) #8-32 Nylock Nuts  Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" Materials: High strength composite Weight: 0.25lbs

RAM® EZ-Roll'r™ Cradle for Apple iPad 7th Gen The RAM® EZ-Roll’r™ cradle for the iPad (7th generation) secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™ cradle also features attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil (1st generation).  Features: Form-fit cradle for the iPad 7th Gen provides a perfect fit for your device without a case Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Lifetime warranty Materials: High strength composite Hole pattern: 4-Hole AMPS: 1.181" x 1.496" Hardware Included: (4) #8-32 x 5/8" Machine Screws (4) #8-32 Nylock Nuts

EZ-Roll'r Cradle for Apple iPad Pro 12.9" 3rd Gen  The RAM® EZ-Roll’r™ cradle for the iPad Pro 12.9” 3rd Gen secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.  Features: 1. Compatible with various iPad cable/docking accessories 2. Roller design for super smooth placement and removal of the iPad Pro 3. High strength materials maximize longevity of cradle 4. Full access to all ports and buttons 5. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

EZ-Roll'r Cradle for Apple iPad Mini 4 The RAM® EZ-Roll'r cradle for the Apple iPad mini 4 is the most cost effective and simple way to secure the iPad mini 4 in a variety of applications. The RAM-HOL-AP20U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Cradle Features: Compatible with various iPad cable/docking accessories Patent pending roller design for super smooth placement and removal of the iPad High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Material: High Strength Composite Note: This product is NOT recommended for devices with a Tech Armore Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag.

EZ-Roll’r™ Cradle for the Apple iPad Pro 12.9" The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro secures your device in a form-fit holder that keeps the entire screen visible. Designed for tablets that are not in a case, the EZ-Roll’r for the iPad Pro features a holder for the Apple Pencil as well. Simply slide the tablet into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. Side buttons, charging port and camera lens are conveniently exposed and accessible while in the EZ-Roll'r™ cradle. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Features: Compatible with various iPad cable/docking accessories Patented roller design for super smooth placement and removal of the iPad Pro High strength materials maximize longevity of cradle Full access to all ports Holder for Apple Pencil built into the side of the cradle Lifetime warranty Made in U.S.A. Material: High Strength Composite Note: This product is NOT recommended for devices with a Tech Armor Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag. Weight: 0.7 lbs.

RAM Suction Cup Mount w/iPad mini EZ-ROLL'R Cradle The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite Suction Cup Mount Features: Double socket arm, 3.25" suction cup twist lock base and round base adapter that contains the universal AMPs hole pattern. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.