RAM 1" Diameter Ball Mount with Long Arm & 2/Diamond Bases The RAM-B-102U-C consists of a long double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Mount with Short Arm & 2/Diamond Bases The RAM-B-102U-A consists of a short double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Double Socket Arm with Diamond Base Part #: RAM-B-103-238U The RAM-103-238U consists of a diamond base and double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball The RAM® Torque™ handlebar and rail mounting base has a 1" rubber ball and accommodates bars 3/4" to 1" in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting Base Dimensions: Accommodates rails 3/4" to 1" in diameter Specs & Features Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.32lbs

RAM Mount Strap Mount w/Long Arm & Diamond Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

Handlebar Rail Mount w/Long Arm & Diamond RAM Handlebar Rail Mount with LONG Length Double Socket Arm & Zinc Coated U-Bolt Base for Rails from 0.5" to 1.25" in Diameter The RAM-B-149ZU-C consists of a zinc coated u-bolt base, LONG Length double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. A composite rail adapter can narrow the rail to a minimum width of 0.5”. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.85 lbs.

RAM 1" Diameter Ball Standard Length Double Socket Arm with 3.25" Diameter Suction Cup Twist Lock Base The RAM-B-166-103U consists of a 3.25" suction cup twist lock base, 1" ball diamond base and standard length double socket arm. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The socket arm is compatible with all 1" ball bases and adapters. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM Mount Strap Mount w/Long Arm & Round Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM 1" Diameter Ball Mount w/2 Diamond Bases The RAM-B-102U consists of a double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball Mount with Short, Double Socket Arm, 2.5" Flex Adhesive Base & Diamond Base Adapter The RAP-B-378-A-238U consists of the flex adhesive base with 1" ball, SHORT SIZE double socket arm and and diamond base adapter. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Using a PSA stick pad, put the flex adhesive mount practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your scooter, motorcycle, kayak, boat or vehicle dash is easy. Attaching the patented 1" rubber ball, to one of many RAM arms, creates the ultimate socket system with multiple adjustment points for articulation and perfect viewing angles. Material: High Strength Composite Ball Size 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Quick Release Adapter with 1" Diameter Ball for "LIGHT USE" Lowrance Elite-4 & Mark-4 Series Fishfinders The RAM adapter base includes a 1" diameter rubber ball and inserts directly to the back of Lowrance Elite 4 and Mark-4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Compatible Devices: Lowrance Elite-4 Lowrance Elite-4 DSI Lowrance Elite-4 Gold Lowrance Elite-4x Lowrance Elite-4x DSI Lowrance Elite-4m Lowrance Mark-4 Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends this adapter base for "Light Use" mounting applications, including light weight Lowrance Elite and Mark Fishfinders.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

1" Track Ball w/ T-Bolt Attachement Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for the all fishing enthusiasts, the RAM Track Base is certain to create more mounting options or access on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-Tracks Scotty Slide Track, Many More!

RAM Mount 1" Diameter Ball Mount w/Long Double Socket Arm & 2/2.5" Round Bases - AMPS Hole Pattern (7-5/16" Length) The RAM-B-101U-C consists of a long double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 7.3125" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 3" Max Width Square Rail Base with 1" Diameter Ball Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.