RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base & Round Base Adapter that Contains a 1/4"-20 Thread for Cameras Part #: RAM-B-149Z-C1U The RAM zinc coated u-bolt rail base consists of the 1" diameter ball and socket system with RAM Universal 1/4"-20 thread centered on a 2.5" diameter plate. This mount is designed to be a universal mounting solution for both still and moving cameras. The base has a 1.0" diameter rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt and nuts included will fit a circular rail with diameter from 0.5" to 1.25". To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black composite covers over the exposed ends of the u-bolt. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. The male 1/4" long, 1/4"-20 thread in the middle of the 2.5" diameter plate will connect to the standard female thread found at the bottom of most still and video cameras.

RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base, Short Double Socket Arm & Round Base Adapter that Contains a 1/4"-20 Thread for Cameras Part #: RAM-B-149ZA-C1U The RAM zinc coated u-bolt rail base consists of the 1" diameter ball and socket system with RAM Universal 1/4"-20 thread centered on a 2.5" diameter plate. This mount is designed to be a universal mounting solution for both still and moving cameras. The base has a 1.0" diameter rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt and nuts included will fit a circular rail with diameter from 0.5" to 1.25". To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black composite covers over the exposed ends of the u-bolt. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. The male 1/4" long, 1/4"-20 thread in the middle of the 2.5" diameter plate will connect to the standard female thread found at the bottom of most still and video cameras.

RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base & 1" Ball Adapter that Contains a 1/4"-20 Thread for Cameras Part #: RAM-B-149Z-237U The RAM-B-149Z-237U consists of a zinc coated u-bolt base, double socket arm and 1" diameter rubber ball, connected to a 1/4"-20 camera thread. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows for infinite articulation and optimum viewing angles. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. Also included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5". Compatible Cameras: Contour GPS Contour HD GoPro HD Helmet HERO GoPro HD Motorsports HERO GoPro HD Surf HERO GoPro Helmet HERO Wide GoPro Motorsports HERO GoPro Motorsports HERO Wide GoPro RC HERO GoPro Surf Hero GoPro Wide HERO Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base & Round Base Adapter that contains the AMPs Hole Pattern Part #: RAM-B-149Z-202U The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.50" to 1.25" in diameter. The RAM marine grade aluminum base and ball contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

X-Grip® Phone Mount with Handlebar U-Bolt Base The RAM-B-149Z-UN7U consists of a zinc coated u-bolt base, double socket arm and universal X-Grip® cradle. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.  Specifications: U-Bolt Dimensions: 0.50" to 1.25" Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Includes: (QTY. 1), Optional Tether Included Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components and High Strength Composite Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.78 lbs.

RAM Stainless Steel U-Bolt Base w/1" Ball The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 1" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. U-Bolt Dimensions: Accommodates rails from 1" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. If you prefer the RAM (RAM-B-231ZU) zinc coated u-bolt motorcycle handlebar base, click here.

X-Grip® Large Phone Mount with Handlebar U-Bolt Base The RAM-B-149Z-A-UN10U consists of a zinc coated u-bolt base, short double socket arm and universal spring loaded X-Grip IV cradle for large phones and phablets. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a RAM B size 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip IV cradle expands and contracts, allowing for a perfect custom fit of your phone or phablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.  Specifications: Includes: (QTY. 1), Optional Tether Included U-Bolt Dimensions: Accommodates rails from 0.5" to 1.25" in diameter Cradle Dimensions: Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components and High Strength Composite Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.75 lbs.

RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for Cameras The RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM® Double Ball Mount with 1/4"-20 Male Thread - Medium Arm The RAM-101AU consists of a double socket arm mount, one round 2.5" diameter base with the universal AMPS hole pattern and round base with a 1/4"-20 threaded steel stud. The round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.  Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" 3-Hole 120-Degree: 1.812" Diameter Features: Socket to Socket Length: 4.66" Plate Size: 2.5" Diameter Materials: Marine-grade aluminum Product Dimensions: Overall Height: 7.35" Ball/Socket Size: C Size - 1.5"

RAM® Spine Clip Garmin Mount with Handlebar U-Bolt Base  The RAM® Spine Clip holder is a mount adapter that easily clips into the integrated spine connection on a wide variety of Garmin devices. Included are a medium-length RAM® double socket arm and zinc-coated handlebar U-Bolt base that accommodates rails from .5” to 1.25” in diameter. This ideal motorcycle mount is perfect for securing your Garmin device in the harshest conditions. Features: Kit includes RAM® Spine Clip Holder for Garmin, B size diamond ball base, short double socket arm, and RAM® U-Bolt base The holder secures any Garmin handheld device with an integrated spine connection The U-bolt base includes a bar spacer and accommodates rails from .5" to 1.25" in diameter Backed by a lifetime warranty Compatible Garmin Devices: Alpha® 100, Approach® G3, Approach® G5, Astro® 320, Astro® 430, Astro® 900, Dakota® 10, Dakota® 20, eTrex® 10, eTrex® 20, eTrex® 20x, eTrex® 22x, eTrex® 30, eTrex® 30x, eTrex® 32x, eTrex® Touch 25, eTrex® Touch 35, eTrex® Touch 35t, GPSMAP® 62, GPSMAP® 62s, GPSMAP® 62sc, GPSMAP® 62st, GPSMAP® 62stc, GPSMAP® 64, GPSMAP® 64s, GPSMAP® 64sc, GPSMAP® 65s, GPSMAP® 66i, GPSMAP® 66s, GPSMAP® 66st, GPSMAP® 79s, GPSMAP® 79sc, GPSMAP® 86 Series, inReach Explorer®+, inReach® Mini, inReach SE®, Oregon® 200, Oregon® 300, Oregon® 400c, Oregon® 400i, Oregon® 400t, Oregon® 450, Oregon® 450t, Oregon® 550, Oregon® 550t, Oregon® 600, Oregon® 600t, Oregon® 650, Oregon® 650t, Oregon® 700, Oregon® 750, Oregon® 750t, Rino® 610, Rino® 650, Rino® 650t, Rino® 655t, Rino® 700, Rino® 750, Rino® 755t, and Sport PRO™ Includes: Assembly Hardware (1) 1/4"-20 U-Bolt for .5" - 1" Rails (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails (2) 1/4"-20 Nylock Nuts (2) Rubber Caps (1) U-Bolt Spacer Specifications: Clamp Range (inch): .5" - 1.25" diameter Socket to Socket Length (inch):1.75" Ball Size: B Size (1") Weight: 0.68 lb. Materials: Marine-grade aluminum, high-strength composite Weight Capacity:  Standard Use: 2 lbs Heavy-Duty Use: 1 lb

RAM 2.5" Round Base w/1" Ball & 1/4"-20 Male Post Part #: RAM-B-202AU The RAM camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Compatible Cameras: Contour GPS Contour HD Gobandit GPS-HD GoPro HD Helmet HERO GoPro HD Motorsports HERO GoPro HD Surf HERO GoPro Helmet HERO Wide GoPro Motorsports HERO GoPro Motorsports HERO Wide GoPro RC HERO GoPro Surf Hero GoPro Wide HERO Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

Track Ball™ Mount with 1/4"-20 Threaded Adapter for Action Cameras The RAP-B-366-153-354-TRA1 consists of a Track Ball™ base, composite double socket arm, and a 1" ball connected to a round plate with 1/4"-20 camera thread. This steel camera thread will connect to any standard female thread found on camcorders, digital cameras and POV cameras. This kit is compatible with virtually any track system including the RAM Tough-Track™.  Features: 1. Unique rubber ball design dampens shock and vibration helping to extend the life of your camera 2. 1/4"-20 male threaded stud will connect to most female threads found on POV cameras 3. High strength materials ensure product longevity 4. Compatible with the RAM Tough-Track™ 5. Double ball and socket mount offers infinite adjustment angles Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in a poly bag.

Double U-Bolt Base w/D Size 2.25" Ball for Rails from 1" to 1.25" in Diameter The RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter. HARDWARE INCLUDED (2) 1/4"-20 U-Bolts for 1" - 1.25" Rails (4) 1/4"-20 Nylock Nuts (4) Rubber Caps CLAMP RANGE 1" - 1.25" diameter BALL SIZE D Size (2.25") WEIGHT CAPACITY Standard Use: 6 lbs Heavy-Duty Use: 5 lbs Note: The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt. Weight: 0.86 lbs

Double U-Bolt Base w/1" Ball f/Rails from 0.75" to 1.25" Diameter The RAM-B-235U consists of a double u-bolt base with 1" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter.

RAM Twist Lock Suction Cup Mount with 1" Ball Adapter that contains a 1/4"-20 Thread for Cameras The RAM-B-166-237U consists of a 3.25" suction cup locking base, double socket arm and 1" rubber ball that contains a 1/4"-20 camera male thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. The mount contains adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Ball Size: 1 Inch Rubber Ball Color: Black Powder Coat Material: Powder Coated Marine Grade Aluminum