|
Compatible Vehicles:
Freightliner Trucks
International Trucks
Kenworth Trucks
Mack Trucks
Peterbilt Trucks
Volvo Trucks
Placement of Mount:
Passenger side on the floor, under front seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket/Bench
Material:
Powder Coated Steel
Weight:
10.8 lbs.
Features:
Quick installation with no drilling needed.
Notes:
If the heater box is under the seat, the installer may need to drill holes in the base to accommodate vehicle mounting holes or studs. Also, the heater box may cause the system to sit higher than normal. Pole may be cut down by installer to lower kit. This will not void the warranty. May not work with swivel style seats for big rigs.
|
129.30 |
|
|
No-Drill™ Vehicle Base f/ '13-21 Ford Fusion + More
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
Ford
Edge (2007-2013)
Edge Limited (2013)
Edge SE (2013)
Edge SEL (2013)
Edge Sport (2013)
Fiesta (2015)
Fusion (2013-2021)
Placement of Mount:
Passenger side on the floor, under front seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
Powder Coated Steel
Weight:
6 lbs.
Features:
Quick installation with no drilling needed
|
54.68 |
|
|
No-Drill™ Vehicle Base f/ '10-13 Ford Transit Connect + More
Compatible Vehicles:
Ford
Transit Connect (2010-2013)
Transit Connect Wagon Premiun (2013)
Transit Connect XL Van (2013)
Transit Connect XLT Van (2013)
Transit Connect XLT Wagon (2013)
Dodge
Grand Caravan (2008-2009 2012-2016)
Grand Caravan AVP (2013)
Grand Caravan Crew (2013)
Grand Caravan RT (2013)
Grand Caravan SE (2013)
Grand Caravan SXT (2013)
RAM C/V Tradesman Van (2014-2015)
Chrysler
Town & Country (2008-2009 2012-2016)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
4.5 lbs.
Material:
Powder Coated Steel
|
47.48 |
|
|
No-Drill™ Vehicle Base for '05-18 Toyota 4Runner & Tacoma
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Material: Powder Coated Steel
Placement of Mount: Passenger side on the floor, under front seat
Drilling Requirements: None - attaches to seat bolts
Seat Configuration: Bucket
Pole: Purchased Separately
Weight: 9.0 lbs.
Note: Quick installation with no drilling needed. Rock solid construction with a lifetime warranty. The RAM-VB-138 will not fit bench seat trucks. This base is not compatible with bench seat vehicles.
|
108.56 |
|
|
No-Drill™ Laptop Base f/ The Dodge RAM 1500-5500 - 2008-2015
Specifications/Features
Compatible Vehicles:
Dodge RAM 1500-5500 (2008-2015)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
2.1 lbs.
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with lifetime warranty. Low profile keeps mount away from passenger leg space. Won't interfere with levers or factory-installed console or 4WD lever. Designed to accommodate trucks with PTO
|
97.58 |
|
|
RAM® No-Drill™ Vehicle Base for 2019 RAM 1500
This heavy duty, steel RAM® No-Drill™ laptop vehicle base is custom-designed for the 2019 Dodge RAM 1500. Using the passenger side seat rail bolts as attachment points, provided hardware is used to secure the mounting base in the vehicle.
Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
|
46.96 |
|
|
RAM® No-Drill™ Vehicle Base for '20-22 Ford Police Interceptor Utility
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base with a universal design to fit the 2020-2022 Ford Police Interceptor Utility. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle. Compatible with RAM® Tele-Pole™ mounting systems to complete your in-vehicle solution.
Features:
RAM® No-Drill™ base offers low-profile mounting; designed specifically for the 2020-2022 Ford Police Interceptor Utility
Compatible with RAM® Tele-Pole™ mounting systems
Requires no drilling into the vehicle and installs on the passenger side using the existing seat bolts
Made of powder-coated steel
Backed by a lifetime warranty
Specifications:
Hardware Included: Foot Stabilizer
Hole Pattern: Seat Bolt Distance 12" Center to Center
Materials: Powder Coated Steel
|
40.13 |
|
|
RAM® No-Drill™ Vehicle Base for '19 Chevy Silverado 1500 & GMC 1500
The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2019 Chevrolet All-New Silverado and GMC Next Generation Sierra perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle.
Specifications:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Pole: Purchase Separately
Material: Powder Coated Steel
Features:
Custom, No-Drill™ mounting base offers lowest profile in the industry
Manufactured from high strength steel with a durable powder coat finish
If required, high quality fastening hardware is included
Mounts using existing seat bolts, no drilling required
|
52.14 |
|
|
RAM® No-Drill™ Vehicle Base for '20-21 Ford Explorer
RAM® No-Drill™ mounting base for the 2020 Ford Explorer offers low-profile mounting; telescoping pole allows for height adjustments. The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2020-2021 Ford Ranger perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle.
Features:
Made of powder-coated steel
Backed by a lifetime warranty
Hardware Included:
Foot Stabilizer
(2) M10-1.5 x 75mm Hex Bolts
(2) 1.68" Stand-Offs
(2) 3/8" Fender Washers
|
54.61 |
|
|
No-Drill™ Laptop Base f/ '97-16 Ford F-250, F-350, F-450, F-550, F-650, F-750 & Excursion
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
F-250 (1997-2016)
F-350 (1997-2016)
F-450 (1997-2016)
F-550 (1997-2016)
F-650 (1997-2018)
F-750 (1997-2018)
Excursion (2000-2005)
Placement of Mount:
Passenger side floor board, in front of seat
DRILLING REQUIREMENTS:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Material:
Powder Coated Steel
|
86.82 |
|
|
No-Drill™ Laptop Base f/'17-20 Ford F-Series + More
The RAM No-Drill™ laptop mounting base for the 2015 Ford F-150 features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
Custom, No-Drill™ mounting base offers lowest profile in the industry
Manufactured from high strength steel with a durable powder coat finish
If required, high quality fastening hardware is included
Mounts using existing seat bolts, no drilling required
Compatible Vehicles:
Dodge
Journey (2011-2018)
Ford
F-150 (2015-2020)
F-250-F-550 (2017-2020)
Escape (2013-2019)
Expedition (2018-2019)
Transit Connect (2014-2020)
C-Max (2014-2018)
Focus (2011-2018)
Raptor (2015-2020)
Jeep
Compass (2013-2018)
Patriot (2013-2017)
|
45.01 |
|
|
Compatible Vehicles:
Freightliner Trucks
International Trucks
Kenworth Trucks
Mack Trucks
Peterbilt Trucks
Volvo Trucks
This No-Drill™ Big Rig Laptop Stand installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Material:
High Strength Composite and Powder Coated Steel
Notes:
If the heater box is under the seat, the installer may need to drill holes in the base to accommodate vehicle mounting holes or studs. Also, the heater box may cause the system to sit higher than normal. Pole may be cut down by installer to lower kit. This will not void the warranty. May not work with swivel style seats for big rigs
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.
|
335.02 |
|
|
RAM POD I Universal No-Drill Vehicle Mount with 18" Flex Rod & Diamond Adapter Base
Part #: RAM-B-316-1-238U
The RAM POD I, No-Drill vehicle mount, consists of a 1" ball and diamond base with 18" rigid flex rod. The flex rod base is designed to connect to a vehicle seat rail bolt in cars, trucks, fleet vehicles and suvs. The flex rod can hold light to medium weight items in your vehicle safely and securely.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
35.32 |
|
|
Universal No-Drill™ Vehicle Base
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base with a universal design to fit a variety of vehicles. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Will this mount install in your vehicle? Learn more by following the steps in the Quick Guide located under the Literature tab.
Features:
Custom, No-Drill™ mounting base offers lowest profile in the industry
Manufactured from high strength steel with a durable powder coat finish
If required, high quality fastening hardware is included
Mounts using existing seat bolts, no drilling required
Specifications:
Placement of Mount: Passenger side floor board, in front of seat
Drilling Requirements: No Drilling - uses existing seat bolts
Seat Configuration: Bucket
Pole: Lower Pole included with base
Material: Powder Coated Steel
Features:
1. Custom, No-Drill™ mounting base offers lowest profile in the industry
2. Manufactured from high strength steel with a durable powder coat finish
3. If required, high quality fastening hardware is included
4. Mounts using existing seat bolts, no drilling required
|
66.79 |
|
|
No-Drill™ Vehicle Base for '07-13 Chevrolet Silverado + More
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Placement of Mount:
Passenger side floor board, in front of seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Hole Pattern:
Seat Bolt Distance: 15"-15.5625" center to center
Pole:
Purchased Separately
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty
Compatible Vehicles
Chevrolet
Avalanche (2007-2013)
Avalanche LS/LT/LTX (2009)
Silverado (2007-2013)
Silverado 1500 (2007-2013)
Silverado 1500 Hybrid (2008)
Silverado 1500HD (2008)
Silverado 2500HD (2007-2013)
Silverado 3500HD (2007-2013)
Suburban (2007-2014)
Suburban 12-Ton (2012)
Suburban 34-Ton (2012)
Tahoe (Front Bucket Seats Only) (2007-2014)
GMC
Sierra (2007-2013)
Sierra 1500 (2007-2013)
Sierra 1500 Denali (2012)
Sierra 1500 Hybrid (2008 2012)
Sierra 1500HD (2008)
Sierra 2500HD (2007-2014)
Sierra 2500HD Denali (2007-2012)
Sierra 3500HD (2007-2014)
Sierra 3500HD Denali (2007-2014)
Sierra Hybrid (2011)
Yukon (2007-2014)
Hummer
H2 (2003-2011)
|
118.24 |
|