RAM Trolling Motor Stabilizer Mount with Long Double Socket Arm The RAM-108-DU consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2" in diameter. The trolling motor stabilizer will take every bit of the vibration out of your trolling motor while all the time protecting the head, shaft and mount from damage. A must for any angler with a bow mount trolling motor. The maximum allowable distance between the mounting surface on the boat and the lowest point of the trolling motor shaft is 12". Distances shorter than this are compatible. Strap Dimensions: 0.5" to 2" Features: 1. Reduces bouncing on the water or when transporting your boat 2. Ideal for rough water conditions 3. Holds trolling motor in place 4. Reduces shock and vibration 5. Lifetime warranty Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM Trolling Motor Stabilizer Mount The RAM-108U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The strap will accommodate rails from 0.5" to 2" in diameter. The trolling motor stabilizer will take every bit of the vibration out of your trolling motor while all the time protecting the head, shaft and mount from damage. A must for any angler with a bow mount trolling motor. The maximum allowable distance between the mounting surface on the boat and the lowest point of the trolling motor shaft is 8.75". Distances shorter than this are compatible. Strap Dimensions: 0.5" to 2" Features: 1. Reduces bouncing on the water or when transporting your boat 2. Ideal for rough water conditions 3. Holds trolling motor in place 4. Reduces shock and vibration 5. Lifetime warranty Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM Trolling Motor Stabilizer Mount The RAP-400-202U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and Tough-Claw®. The trolling motor stabilizer will take every bit of the vibration out of your trolling motor while all the time protecting the head, shaft and mount from damage. A must for any angler with a bow mount trolling motor. Clamping Range: 0.625" to 1.14" Features: Reduces bouncing on the water or when transporting your boat Ideal for rough water conditions Holds trolling motor in place Reduces shock and vibration Lifetime warranty Ball Size: 1.5" Rubber Ball Size

RAM® Tough-Claw™ Trolling Motor Stabilizer - C Size Medium  Ideal for stabilizing trolling motors, the RAP-400-202U consists of the small RAM® Tough-Claw™ base, C size medium-length double socket arm, and a round base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails, and bars. The RAM® Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern. This mount is designed with RAM® C size 1.5" diameter patented ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Features: Includes a small version of the RAM® Tough-Claw™, medium length C size RAM® double socket arm, and 2.5" round plate with C size 1.5" RAM® rubber ball A small version of the RAM® Tough-Claw™ base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Clamp Range (inch): 0.625" - 1.14" diameter Socket to Socket Length (inch): 4.66" Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Plate Size: 2.5" Diameter Ball Size (inch): C Size (1.5") Materials: Marine-grade aluminum, High strength composite Packaging Type: Polybag Weight: 2.19 lb. Weight Capacity:  Standard Use: 4 lbs  Heavy-Duty Use: 3 lbs

Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1/2"-5" Spacing  The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing  The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Maxxum Trolling Motor Stabilizer Lock 5"-8" Spacing  The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 8"-12" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for MotorGuide Trolling Motor Stabilizer Lock 5"-8" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions 

RAM Mount Strap Mount w/Long Arm & Diamond Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Mount Strap Mount w/Long Arm & Round Base Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

Force™ Trolling Motor Stabilizer Use this to replace the stabilizer included with the Force trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Handlebar Rail Mount w/Long Arm & Diamond RAM Handlebar Rail Mount with LONG Length Double Socket Arm & Zinc Coated U-Bolt Base for Rails from 0.5" to 1.25" in Diameter The RAM-B-149ZU-C consists of a zinc coated u-bolt base, LONG Length double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. A composite rail adapter can narrow the rail to a minimum width of 0.5”. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.85 lbs.