Tele-Pole™ with 12" & 18" Poles & 75mm VESA Mount
This RAM® Tele-Pole™ consists of an 18" lower pole, a 12" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device.
Features:
Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™
Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of your connected device
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 9.73 lb.
|
164.96 | |
RAM® Tele-Pole™ with 12" & 18" Poles, Double Swing Arms & Round Plate
The RAM-VP-SW1-1218 consists of a 18" lower female Tele-Pole™, 12" upper male Tele-Pole™, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole™ will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole™. The height of the Tele-Poles™, combinded, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The double swing arm allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Features:
Dual articulating swing arms allows for ideal device placement
Compatible with a variety of RAM® laptop, tablet, and other device holders
Made of powder-coated steel and marine-grade aluminum
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(4) 5/16"-18 x 1" Carriage Bolts
(4) 5/16"-18 Hex Nuts
(4) 5/16" Flat Washers
(4) 5/16" Split Lock Washers
(4) Rubber Caps
|
126.49 | |
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
||
Tele-Pole™ with 8" & 9" Poles & 75mm VESA Mount
This RAM® Tele-Pole™ consists of a 9" lower pole, an 8" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device.
Features:
Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™
Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of the connected device
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 8.55 lb.
|
148.07 | |
Tele-Sun Carbon Fiber Shade Poles with Carry Bag
Extend your time on the water and at the sandbar with the new Tele-Sun Shade Poles! Made from strong, lightweight and flexible Carbon Fiber, the Tele-Sun Shade Poles are easy to install and stow – maximizing time and fun on your boat. Simply insert the poles into your boat’s rod holders, secure a sun-protecting fabric to the boat top, attach the fabric connector to the poles and extend the poles into position. The Tele-Sun Shade Poles can be mounted to the front or rear of your boat, depending on your preference, and telescope from just over 52.89" to 80.4" tall.
Features:
Lightweight Carbon Fiber material with clear, Awl Grip UV-protection
Built to withstand the harsh marine environments
Easy installation to deck-mounted rod holders with 1/4” pin
Cam cleat allows for easy adjustment of line tension
Open hood feature allows for alternative fabric clamping bungee cord system
Extends from 52.89" to 80.4"
Sold as a pair
Includes a mesh carrying bag for storage
Not included - Flush Mount Rod Holder 10° (Part # F31-0702BXY) and canvas material
1-year limited warranty
|
1224.50 | |
RAM X-Grip II
Part #: RAM-HOL-UN8BU
Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle.
The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets.
Compatible Devices:
Amazon Kindle
Amazon Kindle Fire
Archos 7
Asus EEE Pad Memo
Barnes & Noble NOOKcolor
BlackBerry PlayBook
Dell Streak 7
HTC Flyer
Panasonic Toughpad JT-B1
Samsung Galaxy Tab (7" version)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 2.25"
(Devices 2.25" in width must be a minimum of 7" in height to fit)
Maximum Width = 5.75"
Depth = 0.875"
Features:
Spring loaded holder expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the holder for quick release of your tablet
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
|
37.60 | |
RAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round Base
The RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
32.26 | |
Oberdorfer N991-32-C82-W Brz Gear Pump W/12/24V Mtr
|
1896.34 | |
8" Upper Pole with Double Swing Arms & 75 x 75mm VESA Plate
The RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: C Size 1.5" Rubber Ball
Note: Part number reflects product packaged in clear clam shell for store shelf display
|
100.09 | |
RAM Double Swing Arm w/4" Male & No Female Tele-Pole
Swing Arm connects to a 75mm x 75mm VESA Plate.
|
97.74 | |
12" Upper Flange Pole with D Size 75x75mm VESA Mount
This 12" Upper Flange Pole consists of a 12" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with the specific vehicle, enabling a rugged mobile office setup.
Features:
Pair this 12" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 7.49 lb.
|
134.54 | |
8" Upper Flange Pole with D Size 75x75mm VESA Mount
This 8" Upper Flange Pole consists of an 8" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with a specific vehicle for a rugged mobile office setup.
Features:
Pair this 8" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle
Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware
Socket-to-Socket Length (inch): 6.88”
Hole Pattern (inch): 75 x 75mm VESA
Ball Size (inch): D Size (2.25")
Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs
Materials: Powder-coated steel and marine-grade aluminum
Weight: 6.7 lb.
|
128.44 | |
RAM (Left hand Orientation) Universal No-Drill™ RAM Pod HD Vehicle Mount w/ Double Socket Arm & 3.625" Square Base (Vesa 75mm x 75mm Hole Pattern)
Blending the best of versatility, strength and installation ease; the RAM ToughPod HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM ToughPod HD is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM ToughPod HD makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet.
Low Profile, Low Cost and Extremely Robust:
- The minimalist design offers a low profile form factor while offering an extremely robust mounting platform
- Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications
Highly Versatile:
- Angle adjustment feature to compensate for varying floorboard angles
- Can be used as a horizontal or vertical flat surface drill-down mount
- Solid steel post can be cut to size in order to accommodate varying vehicle configurations
Easy to Install and Remove:
- Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle
- Attaches using an existing seat rail bolt or seat track
- Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use
Pole Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
165.80 | |
RAM Mount POD III Universal No-Drill Mount w/Double Socket Arm, 2.5" Round Base & 3.625" Square Base RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)
The RAM-316-3-2461U consists of the RAM POD III No-Drill vehicle base, 3 rigid aluminum rod legs, double socket arm, 2.5" round base that contain the universal AMPs hole pattern and 3.625" square base that contains the VESA hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
140.00 | |
RAM 75mm X 75mm VESA 3.625" Plate with 1.5" Diameter Ball
This RAM-2461U consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. The RAM-2461U is compatible with the following electronic devices:
MobileDemand XTablet T8600
Glacier Computer Ridgeline
Routeware DMS 5000
|
18.42 | |