Universal Backing Plate Mount with 75x75mm VESA Plate The mount consists of a double socket arm with one 2.5" diameter round base and one 75mm x 75mm VESA plate, as well as one backer plate. This mount is extremely adjustable and makes a great choice for anyone interested in mounting a device with a VESA hole pattern to a flat surface that can be drilled into. Specifications: Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Product Dimensions (inch): Overall Height: 7.35" Socket to Socket Length (inch): 4.66” Hole Pattern: 75 x 75mm VESA Plate Size (inch): 3.625" x 3.625" Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum Weight: 1.59 lb.

8" Upper Flange Pole with D Size 75x75mm VESA Mount This 8" Upper Flange Pole consists of an 8" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with a specific vehicle for a rugged mobile office setup. Features: Pair this 8" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 6.7 lb.

Universal Backing Plate Universal backing plate for rod holders

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM® Double Socket Arm with 75x75mm VESA Plate This RAM-103U-B-2461 consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern and SHORT length double socket arm. The rubber ball is positioned 0.88" from the center of one edge. The double socket arm will attach to all RAM 1.5" dia. ball bases.  Features: Socket-to-Socket Length: 2.5" Ball/Socket Size: C Size (1.5") Materials: Marine-grade aluminum

RAM Universal SMALL Tab-Tite Holder for 7" Screen Tablets including the Samsung Galaxy, Dell Streak 7 & BlackBerry PlayBook Now that you've got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. The Tab-Tite is compatible with the following tablets WITH OR WITHOUT SKINS, SLEEVES OR CASES: Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Samsung Galaxy Included With Purchase: (1) Spring loaded back plate (2) Support cups for thin tablets with no skins (2) Support cups for thin tablets with thin or no skins (2) Support cups for thick tablets with cases Mounting hardware The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Height: 7.3" minimum to 9.62" maximum Width: Maximum width to 5.31" Depth: 1.06" maximum Cradle Dimensions: Height: 6.80" minimum to 9" maximum Width: Maximum width to 5.31" Depth: 0.125" minimum to 0.56" maximum Cradle Dimensions: Height: 5" minimum to 9.1" maximum Width: Maximum width to 4.70" Depth: 0.125" minimum to 0.44" maximum Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Diamond base adapter not included with purchase.

RAM Flat Surface Mount® with Long Double Socket Arm & Universal X-Grip® III Holder For Large Tablets The RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal X-Grip® III clamping cradle for 10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III. X-Grip® III Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" X-Grip® III Cradle Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of cradle allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 6. Multiple mounting access points on the back of the cradle 7. Additional support keeper at the bottom of the cradle 8. Full access to all ports 9. Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite

RAM Mount 1.5 Inch Ball Double Socket Arm with 2.5 Inch Round Base The RAM Mount RAM-103U mount, with standard arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Top Gun Backing Plate Secure your new Top Guns with custom-designed backing plates made of anodized aircraft aluminum. These backing plates work with any bolt-in Top Gun or Z-30 outrigger bases. Needed when top thickness is not sufficient to support outrigger bases. Sold individually - 2 required.

Power-Grip™ XL Universal Scanner Gun Holder The RAM® Power-Grip™ XL universal scanner gun holder is designed for use with several large form factor scanner guns and is RAM® Mounts Compatible™ with a full range of ball and socket forklift mounting systems. Using high-strength composite materials, the RAM® Power-Grip™ XL secures scanner guns even when not in use. When required, easily remove the scanner gun to quickly scan the desired item. This holder features two attachment points. First, the hole pattern on the back of the holder allows for the connection of the RAM-202U or the RAM-D-254U (hardware is included for these attachments). Second, the hole pattern on the bottom of the holder allows for the connection of a 2” x 3” plate – RAM-202U-23 or RAM-D-202U-23 – or a drill-down mount (hardware is not included for these attachments). To enable use on the go, integrated holes on both sides of the holder allow for the use of a lanyard or the GDS® Shoulder Strap. Elastomeric fins grip the handle of the scanner gun to ensure a secure fit, and can be easily replaced if required.  Internal Dimensions: Width = 3.96" Length = 2.66" Depth = 7.43" Features: Unique open bottom design enables scanning while in the holder Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required Form fitted cradle supports and protects device without vibration High strength materials ensure product longevity Integrated lanyard holes Lifetime warranty (excludes fin grips) Included: RAM® Power-Grip XL™ Holder Hardware for attaching to compatible RAM® Mounts Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The holder includes a four of two nuts and bolts to connect to any compatible RAM mounts. 

109 Backing Plate with Gasket - Anodized Aluminum Use with the Smooth Slide Rocket Launcher.

Tough-Charge™ Waterproof Wireless Charging Holder with Charger The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi wireless phone charging. All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms. This Qi wireless charging cradle ensures your compatible phone charges no matter what position it’s placed at. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging kit for motorcycles includes a B size diamond base featuring a 1” rubber ball – perfect for attaching to your choice of B size RAM® double socket arm. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwire charger. Features: Waterproof Qi wireless phone charging cradle features spring-loaded RAM X-Grip technology Kit for motorcycles includes wireless cradle, B size diamond ball base, extension cable, and hardwire charger; attaches to B size double socket arms Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments RAM Mounts backed by lifetime warranty, RAM electronics backed by 1-year warranty Specifications: Hardware Included: (1) Safety Tether, (1) Glue Tube for Rubber Caps, (1) Cradle Leg, (1) Cradle Leg Cover, (1) Silicon sleeve for USB waterproof connection, (1) 1.2 Meter USB Extension, Cable Holder Dimensions: Width Range: 2.375" - 3.25", Depth Range: .875" max  Ball/Socket Size: B Size (1") Materials: High strength composite stainless steel

EZ-Roll’r™ Model Specific Cradle w/Round Base Adapter for the iPad 5th Generation, Apple iPad Air 1-2 & iPad Pro 9.7 The RAM-B-202-AP17U consists of a 2.5" round base adapter, with 1" ball, attached to a high strength composite cradle. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. Cradle Features: Compatible with various iPad cable/docking accessories Patent pending roller design for super smooth placement and removal of the iPad High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: This product is NOT recommended for devices with a Tech Armore Glass Screen Protector. The "U" in the part number reflects product packaged in poly bag.

Tele-Pole™ with 12" & 18" Poles & 75mm VESA Mount This RAM® Tele-Pole™ consists of an 18" lower pole, a 12" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device. Features: Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™ Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of your connected device Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 9.73 lb.

Tele-Pole™ with 8" & 9" Poles & 75mm VESA Mount This RAM® Tele-Pole™ consists of a 9" lower pole, an 8" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device. Features: Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™ Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of the connected device Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 8.55 lb.