|
Heavy Duty Positive Displacement Vane Pump - 24V
GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 6.5
Breaker DC: 15 Amp
|
415.33 |
|
|
Heavy Duty Positive Displacement Vane Pump - 12V
GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 6.5
Breaker DC: 30 Amp
|
408.67 |
|
|
Heavy Duty Positive Displacement Reversing Vane Pump - 24V
GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: Pump Mounted Reversing Switch
Max GPM: 6.5
Breaker DC: 15 Amp
|
610.67 |
|
|
Heavy Duty Positive Displacement Reversing Vane Pump - 12V
GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: Pump Mounted Reversing Switch
Max GPM: 6.5
Breaker DC: 30 Amp
|
604.00 |
|
|
Johnson 10-13395 Series 3.5 Aqua Jet Water Pressure System
FEATURES
Pump Body:
Nylon/Polypropylene
Valve Housing:
Polypropylene/Polyamide
Port Size:
3/8" NPT, 1/2" hose (ø 13 mm)
Flow:
3.5 GPM
Pressure:
Cut-In: 25 PSI, 1.7 bar
Cut-Out: 40 PSI, 2.8 bar
Valves:
Santoprene/EPDM
Diaphragm:
Santoprene
Motor:
12 or 24 VDC 85 Watt with built in thermal protection. Duty cycle: Intermittent, max 20 min. The motor is ignition protected according to ISO 8846 (Small craft – Electrical devices – Protection against ignition of surrounding flammable gases).
APPLICATIONS / CHARACTERISTICS
The WPS pump is a five chamber positive displacement diaphragm pump. This pump is the ideal choice for pressurizing water in a closed system such as that found in a boat or in a recreational vehicle. It can easily build the pressure required for a pressurized water supply system.
Quiet operation • Smooth flowing • Self priming to 2m, 6.5ft • Integrated pressure switch turns pump on and off automatically when tap is opened and closed • Built-in by-pass valve which reduces the need for storage tank (only WPS 3.5) • Dry running without damage • Low power consumption • Quick disconnect fittings
Johnson 10-13395-104 3.5 Aqua Jet Water Pressure System 24V
|
187.02 |
|
|
Johnson 10-13406 Series 4.0 & 5.2 Aqua Jet Water Pressure System
FEATURES
Pump Body:
Nylon/Polypropylene
Valve Housing:
Polypropylene/Polyamide
Port Size:
3/8" NPT, 1/2" hose (ø 13 mm)
Flow:
3.4 GPM for WPS 4.0
5.1 GPM for WPS 5.2
Pressure:
Cut-In: 25 PSI, 1.7 bar
Cut-Out: 40 PSI, 2.8 bar
Valves:
Santoprene/EPDM
Diaphragm:
Santoprene
Motor:
12 or 24 VDC with built in thermal protection. Duty cycle: Intermittent, max 20 min. The motor is ignition protected according to ISO 8846 (Small craft – Electrical devices – Protection against ignition of surrounding flammable gases). 100 Watt for WPS 4.0, 150 Watt for WPS 5.2.
APPLICATIONS / CHARACTERISTICS
The WPS pump is a five chamber positive displacement diaphragm pump. This pump is the ideal choice for pressurizing water in a closed system such as that found in a boat or in a recreational vehicle. It can easily build the pressure required for a pressurized water supply system.
Quiet operation • Smooth flowing • Self priming ( 2m 6.5ft for WPS 4.0) (2.5m 8.2ft for WPS 5.2) • Integrated pressure switch turns pump on and off automatically when tap is opened and closed • Dry running without damage • Low power consumption • Quick disconnect fittings.
Johnson 10-13406-104 4.0 Aqua Jet Water Pressure System 24V
|
304.81 |
|
|
Johnson 10-13406 Series 4.0 & 5.2 Aqua Jet Water Pressure System
FEATURES
Pump Body: Nylon/Polypropylene
Valve Housing: Polypropylene/Polyamide
Port Size: 3/8" NPT, 1/2" hose (ø 13 mm)
Flow: 3.4 GPM for WPS 4.0, 5.1 GPM for WPS 5.2
Pressure: Cut-In: 25 PSI, 1.7 bar
Cut-Out: 40 PSI, 2.8 bar
Valves:Santoprene/EPDM
Diaphragm: Santoprene
Motor: 12 or 24 VDC with built in thermal protection. Duty cycle: Intermittent, max 20 min. The motor is ignition protected according to ISO 8846 (Small craft – Electrical devices – Protection against ignition of surrounding flammable gases). 100 Watt for WPS 4.0, 150 Watt for WPS 5.2.
APPLICATIONS / CHARACTERISTICS
The WPS pump is a five chamber positive displacement diaphragm pump. This pump is the ideal choice for pressurizing water in a closed system such as that found in a boat or in a recreational vehicle. It can easily build the pressure required for a pressurized water supply system.
Quiet operation • Smooth flowing • Self priming ( 2m 6.5ft for WPS 4.0) (2.5m 8.2ft for WPS 5.2) • Integrated pressure switch turns pump on and off automatically when tap is opened and closed • Dry running without damage • Low power consumption • Quick disconnect fittings.
Johnson 10-13406-108 - 5.2 Aqua Jet Water Pressure System 24V
|
304.81 |
|
|
Gear Pump 3/4" NPT Ports - 12V
Positive Displacement Gear Pump
The Concept:
Made in the USA GROCO Gear Pumps are self-priming, instantly reversible, and are capable of operation in either direction. Relatively low flow (less than vane pumps) makes them suitable for duties such as deck-wash, fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor, #316 stainless steel shaft, and are available in models that provide reversing (R), remote reversing (RR), and reversing with touchpad (RT) control options.
Featuring:
Self Priming: Yes
Thread NPT: 3/8"
Control Type: None
Max GPM: 3
Breaker DC: 25 Amp
|
392.66 |
|
|
Groco C-60 24V Deck Wash Pump, 24Volt
Groco- Deck Wash Vane Pump System 6.5GPM 20-40psi 24VDC
More Info: C60
|
732.96 |
|
|
Johnson 10-13408-04 AQUA JET UNO 5.2 GPM 24V Water Pressure System
Pump Body:
Polypropylene
Valve Housing:
Polypropylene
Port Size:
1/2" Hose (ø 18 mm)
Flow:
5.2 GPM (19.4 L/Min) for Aqua Jet UNO 5.2
Pressure:
Cut-In: 25 PSI, 1.7 bar
Cut-Out: 40 PSI, 2.8 bar
Valves:
Santoprene
Diaphragm:
Santoprene
Accumulator Tank:
2 Liter with Internal Bladder
Motor:
24 VDC with built in thermal protection. Duty cycle: Intermittent, max 20 min. The motor is ignition protected according to ISO 8846 (Small craft Electrical devices Protection against ignition of surrounding flammable gases). 100 Watt for UNO 3.5, 150 Watt for UNO 5.2.
APPLICATIONS
The Aqua Jet UNO pump is a five chamber positive displacement diaphragm pump system with Accumulator Tank. This pump is the ideal choice for pressurizing water in a closed system such as that found in a boat or in a recreational vehicle. It can easily build the pressure required for a pressurized water supply system.
Quiet operation • Smooth flowing • Self priming ( 2m 6.5ft for UNO 3.5) (2.5m 8.2ft for UNO 5.2) • Integrated pressure switch turns pump on and off automatically when tap is opened and closed • Dry running without damage • Low power consumption • Quick disconnect fittings
|
581.73 |
|
|
Shurflo 2088-514-145 Diaphragm Pump 3.6 GPM 12VDC
Shurflo Diaphragm Pump Premium with Cooling Fins, 3.6 GPM Open Flow, 12VDC Continuous Duty, Santoprene Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing, N.S.F. Listed.
Runs directly on 12 Volt DC
45 PSI pressure switch build-in
Built-in check valve, prevents back flow of fluid through the pumps
Self Priming up to 2.7 vertical lift meters (9′)
Chemical resistant materials
Can run dry without damage
1 year warranty
Positive Displacement 3 Chamber Diaphragm Pump
Pressure Switch: Splash-Proof, Adjustable from 30 to 50 PSI.. Factory Set at 45 PSI Shut-Off, Turn On 25 PSI
Bypass: 45 + 60 PSI Springs
Check Valve: (1-Way Operation) Prevents Reverse Flow
Liquid Temperature: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max.
Prime: Self-Priming Up To 9.0 Ft. Vertical
Weight: 6.8 Lbs (3.1 Kg)
Duty Cycle: Continuous
|
267.37 |
|
|
Shurflo 2088-594-154, Diaphragm Pump 3.3 GPM 115VAC
Shurflo Diaphragm Pump Standard, 3.3 GPM Open Flow, 115VAC Intermittant Duty, Santoprene Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing, N.S.F. Listed
MODEL NUMBER: 2088-594-154
PUMP DESIGN: Positive Displacement 3 Chamber Diaphragm Pump
CHECK VALVE: (1-Way Operation) Prevents Reverse Flow
CAM: 3.0 Degree MOTOR: Permanent Magnet, P/N 11-150-10,
Thermally Protected VOLTAGE: 115 VAC Nominal
PRESSURE SWITCH: Adjustable from 30 to 50 PSI. Factory Set @ 45 PSI Shut-Off, Turn On 25 5 PSI
LIQUID TEMPERATURE: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max.
PRIME: Self-Priming Up To 9.0 Ft. Vertical, Max. Inlet Pressure 30 PSI (2.1 Bar)
PORTS: 1/2" - 14 Male Parallel Thread
MATERIAL OF CONSTRUCTION: PLASTICS- Polypropylene VALVES- Santoprene DIAPHRAGM- Santoprene FASTENERS- Zinc Plated Steel
NET WEIGHT: 5.1 Lbs (2.31 Kg)
DUTY CYCLE: Intermittent (See Temp. Rise Chart) TYPICAL APPLICATIONS:
Water Delivery APPROVALS: NSF Listed, UL/CSA Recognized Component
|
217.06 |
|
|
Heavy Duty Bilge Pump 4000 GPH - 24V
Features:
Limited 1 Year Warranty
Capacities of 1600, 2200, or 4000 GPH
Liquid-cooled, 12-pole motor with double ball bearings for extended service life
The shaft of stainless steel (SS2343)
The impeller is carefully designed and tested to maximize head and flow
4000 GPH features a robust motor design, mechanical shaft seal, high impact ABS plastic, and unique threaded port design
Universal base plate and choice of two different ports makes for a simple installation
Removable check valve included
Heavy Duty Submersible Pumps can be combined with either an electronic float switch or the Ultima Switch for automatic operation
Specifications:
Capacity 1.0M head (13.6V/27.2V): 164 l/min - 2600 GPH
Capacity straight (13.6V/27.2V): 252: l/min -4000 GPH
24V
7.5A
Fuse Size: 15A
Connection 1.5" and 2"
|
185.18 |
|
|
Roper Pump 18AM02-2B A Series Gear Pump W/Rv
Ports: 3/8 in.
Flow-Rate: 7.2 GPM
Max RPM: 3600
GPR: .002
Mtg: Flange
Roper A Series pumps are adaptable to a wide range of applications pumping clean ?uids, such as pressure lubrication, hydraulic service, fuel supply or general liquid transfer.
These pumps are designed to operate at standard motor speeds, with provisions for ?ange or foot mounting. The internal bearings are lubricated by the ?uid being pumped. With only two moving parts, the pumps run quietly.
3/8" and 3/4" pumps are 300 PSI and all 1 1/4" - 2" pumps are 150 PSI
Specifications
Type of Pump: Positive Displacement Gear Pump
Materials of Construction: Cast Iron Housing, Ductile Iron Gears and Drive Shafts, Bronze Bearings and Steel Idler Shafts.
Priming: Self Priming
Seal Material: Mechanical Seal (AM)
Viscosity: Up to 2,200 cSt, 10,000 SSU
|
770.40 |
|
|
Johnson 10-13406 Series 4.0 & 5.2 Aqua Jet Water Pressure System
FEATURES
Pump Body:
Nylon/Polypropylene
Valve Housing:
Polypropylene/Polyamide
Port Size:
3/8" NPT, 1/2" hose (ø 13 mm)
Flow:
3.4 GPM for WPS 4.0
5.1 GPM for WPS 5.2
Pressure:
Cut-In: 25 PSI, 1.7 bar
Cut-Out: 40 PSI, 2.8 bar
Valves:
Santoprene/EPDM
Diaphragm:
Santoprene
Motor:
12 or 24 VDC with built in thermal protection. Duty cycle: Intermittent, max 20 min. The motor is ignition protected according to ISO 8846 (Small craft – Electrical devices – Protection against ignition of surrounding flammable gases). 100 Watt for WPS 4.0, 150 Watt for WPS 5.2.
APPLICATIONS / CHARACTERISTICS
The WPS pump is a five chamber positive displacement diaphragm pump. This pump is the ideal choice for pressurizing water in a closed system such as that found in a boat or in a recreational vehicle. It can easily build the pressure required for a pressurized water supply system.
Quiet operation • Smooth flowing • Self priming ( 2m 6.5ft for WPS 4.0) (2.5m 8.2ft for WPS 5.2) • Integrated pressure switch turns pump on and off automatically when tap is opened and closed • Dry running without damage • Low power consumption • Quick disconnect fittings.
Johnson 10-13406-107 - 5.2 Aqua Jet Water Pressure System 12V
|
290.95 |
|