|
CM90 Circulation Pump - 17.2GPM - 12V - 3/4" Outlet
CM90 circulation pumps are a line of compact magnetic driven centrifugal pumps which combine high flow rates with very low electric current consumption. Suitable for fresh water, ethylene glycol and salt water circulation. Glass-fiber reinforced PPA body.
Specifications:
System Pressure:-0.3 to 3.0 bar; stationary max. 4.0 bar
Liquid: Water/glycol mixture; max. 60% glycol, fresh and salt water
Motor service life: More than 5,000 hours at nominal voltage, 10,000 start/stops. Interchangeable motor
Dry running: 30 minutes
Dimensions: 244mm L x 120mm W x 150mm H
Weight: 6.6lbs
Capacity: 17.2 GPM
Ports: 3/4"
|
287.41 |
|
|
CM90 Circulation Pump - 23.7GPM - 12V - 1-½" Outlet
A line of compact magnetic driven centrifugal pumps which combine high flow
rates with very low electric current consumption. Suitable for fresh water,
ethylene glycol and salt water circulation.
System Pressure: -0.3 to +3.0 bar; stationary max. 4.0 bar
Liquid: water/glycol mixture; max. 60% glycol, fresh and salt water
Motor Service Life: More than 5,000 hours at nominal voltage 10,000
start/stops. Interchangeable motor.
Motor, Voltage: Nominal 13.6V DC for use between 10-16V Nominal 27.2V
DC for use between 20-32V
Input Power: Max. 125W
Dry Running: 30 minutes
Dimensions: 244mm (L) x 120mm (W) x 150mm (H)
Ports:Ø 20mm (3/4") & Ø 38mm (1-1/2")
Weight: 3.0kg (6.6lbs)
Body: PPA, glass-fiber reinforced
Mounting: Separate universal bracket for flat surfaces
|
287.41 |
|
|
F5B-1907 Impeller Pump - 12V - 3/4" NPT
For bilge pumping, deckwash, water circulation, oil and diesel refuelling at dockside service, etc.
Features:
Body: Bronze
Impeller: 09-1027B-9
Seal: Mechanical Seal
Connection: 3/4" NPT
Length: 10.15"
Width: 5.15"
Height: 4.72"
Weight: 17.5lbs
|
507.90 |
|
|
500 GPH Ultima Combo Automatic Submersible Bilge Pump 12V
Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.
CE-Approved
Features:
Pre-configured with an electronic Ultima Switch for automatic operation
Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
Extremely energy efficient
Water-cooled motor for long service intervals
Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Pump body: Thermoplastic
Shaft seal: Lip seal
Shaft: Stainless steel
Voltage: 12v
Wire size: 16GA
Hose size: 3/4"
Includes Dura-port connection
Specifications
Capacity 3ft (0.9 m) head (13.6V/27.2): 33 l/min - 525 GPH
Capacity straight (13.6V/27.2V): 40 l/min - 630 GPH
Amperage: 2.5 A
Fuse size: 5 A
Connection: 3/4"
Length: 4.41" (112 mm)
Width: 4.25" (108 mm)
Height: 3.35" (85 mm)
Weight: 14.4 oz.
|
71.86 |
|
|
Get 10% OFF an N76-46P Pump Body Today!
Flotec N76-46P Pump Body
This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps. For use in Ponds, Fountains and watering the grass.
The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.
For use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN.
N76-46P, Pump Body, for use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN
Get Your Coupon Code Today!
|
|
|
AQUA JET UNO 5.2GPM 12V WPS
|
555.09 |
|
|
2 Way Bilge Pump Control
Switch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel in matte black finish has an integrated fuse holder and operating light. Fuses included. Size: 73 mm/2.99" x60 mm/2.17", 40 mm/ 1.57" depth.
|
32.59 |
|
|
Aqua Void Electro-Magnetic Combo 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
This pump is combined with a non-clogging electro-magnetic float switch for automatic operation. The switch reacts to the level of water present in the bilge and automatically activates and deactivates the pump.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoy quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
This cartridge pump combines an electro-magnetic float switch
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 785 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 17.3 oz (0.49 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 3.88 x 4.69 x 6.17 inches (99 x 120 x 157 mm)
|
83.26 |
|
|
Shurflo 94-77-023-17 Motor 12V for 3901-02-6
|
134.97 |
|
|
Jabsco Flexible Impeller Pedestal Pump Ped Mt Neo Imp 1 1/4"
FEATURES
Pump Body:
Bronze pedestal
Port Size:
1-1/4" (32mm) NPT Internal
Horizontal ports on 6400-Series
Vertical ports on 7420-Series
Impeller:
Neoprene
Shaft Seal:
Carbon-Ceramic Face Type
Shaft:
316 Stainless Steel
Standard shafts extend 2 5/16" from pump
Short shafts extend 1 5/16" from pump for use on Caterpillar Engines
Bearings:
Pre-lubricated Double Row Ball
APPLICATIONS / CHARACTERISTICS
MARINE: Pumping bilges, Washdown, Engine Cooling.
INDUSTRIAL: Circulating and Transferring liquids; Velocity-mixing; Transferring soap, liquors, pastes, glues, glycerine, lotions and brine.
FARM: Pumping water for stock and poultry houses and Booster Pumping.
PLUMBING & HOME: Pumping out flooded basements, cesspools, sumps and many other uses.
Jabsco Flexible Impeller Pedestal Pump 1 1/4"NPT Full Cam Neoprene Impeller
|
698.44 |
|
|
March 809 BR 12VDC
Applications for the 809-BR 12V & 24V Magnetic Drive Pump include hot water systems, refrigeration systems and solar heating.
March Pump's industrial 809-BR 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 5 gallons per minute at 1.5 feet, and its maximum head is 7 Feet (or around 3PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.01 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Max Flow
5 GPM
18.9 LPM
Max Head
7.1 FT
2.1 M
Power
.01 HP
.007 KW
Electrical
12V Range 0-14 or 24V Range 0-26
|
459.23 |
|
|
March 809-BR-HS 12V Mag Drive Pump
Applications for the 809-BR-HS 12V Magnetic Drive Pump include hot water systems and solar heating.
March Pump's industrial 809-BR-HS 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 6 gallons per minute at 2.5 feet, and its maximum head is 15.5 Feet (or around 6.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.04 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Max Flow
6 GPM
22.7 LPM
Max Head
15.5 FT
4.7 M
Power
.04 HP
.029 KW
Electrical
12V Range 0-14 or 24V Range 0-26
Type
Centrifugal Mag Drive
Inlet
1/2"MPT
Outlet
1/2"MPT
Wet End
Bronze (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
|
465.08 |
|
|
Marine Toilet Standard Electric EVO Comfort - 12V
Standard electric comfort toilet with a combined electrical 12V macerator and pump for waste disposal and flushing in one single operation.
Including one touch electrical control panel. Easy to clean white regular ceramic bowl and white thermoplastic soft close seat. Stable base for robust installation. Port connections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″).
Plug & play/interchangeable with Jabsco 37010-1090, Johnson Pump 80-47436-01, and other single-operated 12V electrical regular toilet models.
Specifications:
Weight: 9.6 kg/26 lbs
Dimensions: 460/18.1L x 385/15.2H x 365/14.4W mm/in
Type: Single Operation Electric
*CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
|
373.32 |
|
|
Marine Toilet Silent Electric Compact - 12V
Silent electric compact toilet with seperated flushing and waste disposal cycle. Including electronic 3 function control panel, before use, after use and short use plus a trimmer to regulate the flow rate.
Water is from existing pressurized water system onboard with 12V solenoid valve (PN 07-66-030) or 12V flush pump (PN 07-66-032)- not included! Silent operation and low water consumption. Easy to clean white ceramic bowl and white wooden seat.
Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″). Stable base for robust installation.
Plug & play/ interchangeable with Jabsco 37045-0092, Johnson Pump 80-47231-01 and other 12V dual cycle electrical toilet models.
Specifications:
Weight: 8.7 kg/22 Lbs
Dimensions: 420/16.5L x 390/15.35H x 335/13.2W mm/in
Type: Dual Operation Electric
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
|
352.80 |
|
|
Marine Toilet Standard Electric EVO Compact Low - 12V
Standard electric extra compact toilet with a combined electrical 12V macerator and pump for waste disposal and flushing in one single operation.
Including one touch electrical control panel. Smallest and lightest on the market. Easy to clean white ceramic bowl and white wooden seat. Stable base for robust installation. Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″).
Plug & play/ interchangeable with Jabsco 37010-0090, Johnson Pump 80-47435-01, 80-47626-01 and other single operated 12V electrical compact toilet models.
Specifications:
Weight: 9kg/22 lbs
Dimensions: 465/18.3L x 320/12.6H x 345/13.6W mm/in
Type: Single Operation Electric
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
|
374.56 |
|