|
Crank Shaft Engine Cooling Pump
This crank shaft engine cooling pump is interchangeable with F6B-9, Johnson Pump 10-24930-01 replaces Johnson 10-24915-01, Johnson 10-24805-01, Johnson 10-24232-01, and Indmar 685001, which converts pulley-driven to crank shaft-driven mounts for Ford or GM V6/V8 marine engine blocks. Other applicable engine blocks include PCM, Crusader, Mercruiser, and more.
|
202.30 |
|
|
Jabsco 17360-1001 Engine Cooling Pump
For Detroit Diesel, V-71-92, 23507475, 23507476, 23507477, 23507973
Caterpillar, D-336, D-343, D-353, 3N1888
Some Stewart & Stevenson Marinizations of Detroit Diesel Engines.
Pump Body: Bronze
Port Size: 2-1/2" Flange Type
Impeller: Neoprene use Jabsco 17370-0001-P Impeller
Cam: Wear Resistant Polyurethane Cam/Liner
Shaft Seal: Mechanical Face Seal
Shaft: 316 Stainless Steel
Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Bronze flexible impeller engine cooling pump
Flow rate: Nominal 270 Litres/min (60 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Minor plumbing modifications may be required for certain applications.
Jabsco Engine Cooling Pump, 6 cover screws with double flat Impeller drive
|
3112.95 |
|
|
JMP Marine Crank Mounted Engine Cooling Seawater Pump JPR-CP25UH
Product Information & Specs:
Uses JMP Impeller p/n: 7136-01K
Pump Weight (approx): 4.85 LBS (2.20 KG)
Pump Type: Crank Mounted Raw Water Pump
Port Size (mm/inches): 32mm / 1.25"
Pump Size (mm/inches): Length (124mm/4.88"), Width (114mm/4.49"), Height (117mm/4.61")
Plug & Play Replacement
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
High Performance Flexible Impeller
Crank Mounted
Replaces these Volvo Penta pumps: 3860703, 841640, 856513, 857451
Replaces this Jabsco pump: 50410-1201
Replaces these Johnson pumps: F6B-9, 10-24232-1, 10-24930-01, 10-24805-01, 10-24076-2, 10-24228-1, 10-24915-1
Replaces this Sherwood pump: P105
Replaces this Alaska Diesel pump: L6414A
Replaces these Indmar pumps: 685001, 685001-1, 685001-3, S685001
Replaces this Marine Power pump: 524520Z
Replaces this Northern Lights pump: 25-11030
Replaces this Sierra pump: 18-3587
Replaces these: Crusader, PCM, Pleasurecraft, Seamaxx RA057023, RA057024, RA057026 pumps
Used on Engine Models Alaska Diesel, Crusader, Indmar, Jabsco, Johnson, Marine Power, Northern Lights, PCM, Pleasurecraft Marine, Sherwood, Sierra, Seamaxx, Volvo Penta
|
277.12 |
|
|
Jabsco 1673-1003 Pump 1/2" Ped Mt
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Impeller: Nitrile
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene or Nitrile (Oil Resistant)
Shaft Seal: Lip Seal or Mechanical seal, Buna N
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller
|
447.01 |
|
|
Jabsco 1673-2001 Pump 1/2" Npt Neo W/Mech Sl
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene
Shaft Seal: Mechanical seal
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of a flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Mechanical Seal Neoprene Impeller
|
543.35 |
|
|
Jabsco 17540-0201 Engine Cooling Pump
Jabsco 17540-0201 is a Detroit Diesel marine engine cooling pump
Impeller: Neoprene
Shaft Seal: Carbon/Ceramic Mechanical Seal
Port Size: 3 Inch
This is the Marine Engine Cooling Pump for Detroit Diesel Series 60 Engines, Detroit Diesel pumps 23525200, 23522735, 23535447.
|
3971.18 |
|
|
Sherwood P1016 Engine Cooling Pump
The Sherwood P1016 flexible impeller engine cooling pump replaces the Sherwood pump P1016-01
Applications for the Sherwood P1016 pump include: Cummins QSD 2.0 & 2.8 engines, replaces Cummins 854179001, Mercury MerCruiser 879312023 and 854179001 pumps.
This is a genuine Sherwood P1016 flange mounted boat engine cooling pump, using raw water intake (river water or sea water) to cool the engine. The Sherwood P1016 is supplied complete with a 12 vane through key drive flexible neoprene impeller.
The raw water engine cooling pump is the heart of the marine engine, supplying a continuous flow of raw water to maintain temperatures consistent with the demanding engine performance. Over the years, Sherwood raw water pumps have developed a reputation of excellence in quality; and today are chosen for their performance and dependability by the most prestigious marine engine manufacturers.
Sherwood pumps are one of the largest suppliers of flexible rubber impeller cooling pumps for marine engines in the USA. They can be found fitted on some of the most well known engine brands in both pleasure and commercial boats.
To ensure that your boat engine cooling pump performs as required, regular preventative maintenance and inspection should be carried out. The Sherwood engine cooling pump impeller should be replaced every 3 - 12 months depending on application.
|
452.05 |
|
|
Jabsco 18330-0000 Electric Clutch Pump 12V with 2" Ports
This Manually Activated Clutch Pump Offers all the Benefits of Flexible Impeller Pumps with a High Capacity Flow Rate and Horizontally Oriented Ports.
Pump Body: Bronze
Port Size: 2" NPT
Flow: 83 GPM at 10 feet of Head, 1750 RPM
Impeller: Nitrile
Shaft Seal: Mechanical, Carbon-Ceramic
Shaft: Brass
Pulley: 7" Diameter
Used for
MARINE: Engine cooling, pumping bilges, washdowns, circulating water in bait tanks, utility dockside pump.
INDUSTRIAL: Circulating and transferring, velocity mixing, return spill, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, tanning liquors, glycerine, brine.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
18330-0000 is Jabsco Electric Clutch Pump 12V, 2" NPT Ports, Double "A" Groove Pulley
|
1590.14 |
|
|
Jabsco 18830-1020 Engine Cooling Pump
Pump Body: Bronze
Port Size: 1" ID Hose
Impeller: Neoprene
Shaft Seal: Carbon-Ceramic Face Type
Shaft: Stainless Steel
Jabsco 18830-1020 Engine Cooling Pump with High Pressure Impeller, 3/16" Pulley Key and No Pulley or Pulley Mounting Plate.
|
745.98 |
|
|
Jabsco 18840 Series Engine Cooling Pump
Pump Body: Bronze
Port Size: 1" ID Hose
Impeller: Neoprene
Shaft Seal: Carbon-Ceramic Face Type
Shaft: Stainless Steel
Pulley: 6 1/2" diameter "A" belt
Jabsco Engine Cooling Pump High Pressure 1" Hose Ports With 6 1/2" "A" Belt Pulley
|
1135.10 |
|
|
Sherwood P1735X-J Engine Cooling Pump JPR-S7619 for John Deere
JPR-S7619 JMP Marine John Deere Replacement Engine Cooling Raw Water Pump
See: https://www.clrmarine.com/m4/JMPMA%20JPR-S7619--jmp-marine-jpr-s7619-john-deere-re45458-replacement-engine-cooling-pump.html
|
764.74 |
|
|
Sherwood P1733X-J Engine Cooling Pump JPR-S7633
JPR-S7633 John Deere Replacement Engine Cooling Seawater Pump
See: https://www.clrmarine.com/m4/JMPMA%20JPR-S7633--jmp-marine-jpr-s7633-john-deere-re515657-dz114697-engine-cooling-pump.html
|
871.01 |
|
|
Jabsco 18930-0020 Engine Cooling Pump 1 1/4" Hose Ports
Pump Body: Bronze
Port Size: 1 1/4" ID Hose
GPM: 15
Impeller: Neoprene
Shaft Seal: Carbon-Ceramic Face Type
Shaft: Stainless Steel
Shaft Key: 3/16"
Pulley: 6 1/2" diameter A belt
Self-priming from dry up to 2.4m.
Constructed from marine quality bronze and stainless steel.
Mechanical seal.
Easy to service and maintain.
Handles hard and soft solids without clogging.
Will tolerate abrasive wear.
Can pump in either direction.
Will not airlock.
|
748.85 |
|
|
Jabsco 2570-3100 Engine Cooling Pump
FEATURES
Pump Body:
Bronze
Ports:
Flanged
Impeller:
Neoprene
Shaft:
Stainless Steel
APPLICATIONS / CHARACTERISTICS
Engine Cooling Pump. Detroit Diesel.
Jabsco Engine Cooling Pump, 5 cover screws 2 1/2 inch Impeller depth
Detroit Diesel 653 671 853 23507971 5186250 5107480 23501083 2313002 5137208 5115396
|
1638.92 |
|
|
Jabsco 50310-1001 Gear Driven Engine Cooling Pump
Pump Body: Bronze, Flange Mounted To Engine
Ports: 32mm, 1-1/4"
Shaft Seal: Mechanical Seal
Shaft: Tapered Shaft To Accept Engine Builder Supplied Gear
Gear Is Not Included
Found on Northern Lights (Luger) Generators and John Deere.
These same parts also fit the 30510-7001 pump.
|
787.16 |
|