This mount attaches to any flat surface and is easily adjusted for optimal viewing. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G Radar Includes ADA-R1 modular top plate. Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel. This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

PP4409 PowerPod Pre-Cut for Garmin STRIKER™ 7" 7sv/7dv (Requires Flush Mount Kit Garmin Part) - Carbon Black PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. All PowerPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Swivel Base with large pass-through for wire harness

PP4410 PowerPod Pre-Cut for Garmin STRIKER™ 5dv (Requires Flush Mount Kit Garmin Part) - Carbon Black PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. All PowerPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Swivel Base with large pass-through for wire harness

USB Card Reader with USB-C Adapter Cable Save space on your helm with the compact, water-resistant SD™ card reader. It holds two full-size SD cards for quick access to charts, software updates, and ActiveCaptain® data. Featuring a 2-inch x 2-inch footprint, flush mounting, and USB connection to the back of your chartplotter, this card reader easily integrates into a crowded dash or elsewhere at the helm. Specifications: Dimensions (W×H×D): 2" x 2" x 2.4" (excluding the cable) Weight: 4.025 oz Temperature range: -15C to 70C Material: fully gasketed, high-impact plastic, waterproof to IPX7 standards Input power: 4.75V – 5.25V Maximum power usage at 10 Vdc: 2.5 W Typical current draw at 12 Vdc: 100 mA Maximum current draw at 12 Vdc: 500mA Compass-safe distance: 21 inches (533 mm) What's In The Box? Garmin USB card reader USB-C adapter cable Mounting hardware Power cable Documentation

Tapered Mast for Garmin/Raymarine/Navico Domes & Starlink This remake of Scanstrut's classic tapered mast mount has been designed to provide optimal ease of installation while creating a robust and aesthetically pleasing mount adaptable to multiple different technologies on one mounting platform. Now made easier to install, the PTM-R1-SL features access panels under each "wing" to allow for easy access and quick and simple cable routing. The design also focuses on ensuring that NMEA connectors fit within the mast and the wings, eliminating the need to remove the connectors for installation. This mast is suitable for mounting radar, lights, Satcom, Starlink, GPS/VHF antennas, and cameras seamlessly together. Features: Mount Radar, thermal camera, aerials, and Starlink high-performance in one installation  Constructed from marine-grade aluminum Paint finishes comply with Scanstrut's unique 4-step marine paint system Access panels are on the underside of the wings for ease of wiring Watertight installation Pre-drilled mounting holes allow the radar to fasten straight to the mast with its own mounting bolts

Fusion to Garmin Marine Network Cable - Male to RJ45 - 6' (1.8M) Use these adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo.  These cables will connect a Garmin Marine Network port to an RJ45 port and are offered in male and female connector varieties to fit your specific system. Features: Length - 6' (0.15 M) Connections - RJ45 Compatible Products: Fusion Apollo RA770 Fusion Apollo SRX400 Fusion Apollo WB670 Fusion Apollo RA670 *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fusion to Garmin Marine Network Cable - Female to RJ45 - 6" (0.15M) Use these adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo.  These cables will connect a Garmin Marine Network port to an RJ45 port and are offered in male and female connector varieties to fit your specific system. Features: Length - 6' (0.15 M) Connections - RJ45 Compatible Products: Fusion Apollo RA770 Fusion Apollo SRX400 Fusion Apollo WB670 Fusion Apollo RA670 *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Network Adapter Cable - Small Female (Right Angle) to Large Female Adapt the small network connector on your Garmin device to a large connector of Garmin Marine Network cables.  Compatible with: GMR Fantom® 124, 126, 18x/24x Dome Radar, 254, 246, 54, 56 radars Technical Specifications: Length - 11.8" (30cm) *Sold as an Individual

RAM 1" Diameter Ball Mount with 2/2.5" Round Bases & Mounting Hardware for Garmin Fishfinders & GPSMAP Devices The RAM-B-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the RAM-B-101-G2U mount to your optimum viewing position. Color: Black Powder Coat Ball Size: 1 Inch Rubber Ball Material: Powder Coated Marine Grade Aluminum

Marine Network Adapter Cable - Small (Female) to Large Adapt the small network connector to the larger Garmin Marine Network connector with this cable — which is part of the Panoptix™ LiveScope ice fishing kit.

Marine Swivel Mounting Bracket Replacement marine swivel mounting bracket for the 400 - series Fishfinders, Chartplotters, and Sounders gpsmap 441 GPSMAP 421 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transom Mount Mounting Bracket for CPT-60 Raymarine's mounting bracket specifically for CPT-60.

Transom Mount Bracket for HV-100 Raymarine Transom Mount Bracket specifically for Raymairne's HV-100.

65 Series Marine Carbon Monoxide Alarm 12V - Surface Mount - White Features: NMMA Listed Component Meets ABYC A-24 Standard - CARBON MONOXIDE DETECTION SYSTEMS Listed to UL 2034 Carbon Monoxide Alarms – Marine Use Meets ISO: 12133 Small craft - Carbon Monoxide (CO) detection systems Works in extreme temperatures - Only marine CO alarm listed to operational temperatures of -40° F to 158° F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating Low Current Draw. Innovative micro current circuit saves battery power for the boater. 60 milliamp (.06 amp.) current draw Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. Alarm will reactivate if it still senses dangerous levels of CO End of Life Signal alerts boater to replace the alarm after 5 years of service Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory