|
MOB+ xFOB Multifob *3-Pack
MOB+ xFOB is the heart of the MOB+ Wireless Cut-Off Switch. Such a small device, but packed with wireless technology – it is groundbreaking.
As you step aboard your boat, press the xFOB to connect to the xHUB. Up to four (4) xFOB’s can be connected to the xHUB at the same time, with one (1) unit acting as the captain’s stop unit, and the additional three (3) as alarm units for passengers. Up to 20 xFOB's can be stored per xHUB.
With the Universal Fit design, it can fit inside the xTAG, xBAND, clipped to your PFD/belt, or in your pocket.
*xFOB works with the MOB+ xHUB (sold separately)
Features:
The automatic timer function ensures the unit does not remain turned on should it be forgotten on the boat.
The xFOB is your personal safety guard at sea.
Universal fit design.
Technical Specifications:
Weight - 10 grams
Temperature range - -15°C to 55°C
Voltage Source - CR2032 - 3V lithium battery
Battery life - 300 hours continuous usage
Frequency area -915 MHz FCC (US version)
Three (3) meters water resistant
Dimensions (H x W x D) - .45" x 1.1" x 1.74"
In the Box:
MOB+ xFOB x three (3)
Battery x three (3)
Instruction manual
*Sold as a three (3) pack
|
151.16 |
|
|
MOB+ xFOB Multifob
MOB+ xFOB is the heart of the MOB+ Wireless Cut-Off Switch. Such a small device, but packed with wireless technology – it is groundbreaking.
As you step aboard your boat, press the xFOB to connect to the xHUB. Up to four (4) xFOB’s can be connected to the xHUB at the same time, with one (1) unit acting as the captain’s stop unit, and the additional three (3) as alarm units for passengers. Up to 20 xFOB's can be stored per xHUB.
With the Universal Fit design, it can fit inside the xTAG, xBAND, clipped to your PFD/belt or in your pocket.
*xFOB works with the MOB+ xHUB (sold separately)
Features:
Automatic timer function ensures the unit does not remain turned on should it be forgotten on the boat.
The xFOB is your personal safety guard at sea.
Universal fit design.
Technical Specifications:
Weight - 10grams
Temperature range - -15°C to 55°C
Voltage Source - CR2032 - 3V lithium battery
Battery life - 300 hours continuous usage
Frequency area -915 MHz FCC (US vers.)
Three (3) meters water resistant
Dimensions (H x W x D) - .45" x 1.1" x 1.74"
In the Box:
MOB+ xFOB
Battery
Instruction manual
*Sold as an Individual
|
52.79 |
|
|
12-10 AWG Heat Shrink Butt Connector - 3 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #12-10 AWG
Insulation Color: Yellow
Max Wire Insulation Outer Diameter (inch): 0.28"
Package Size: Three
|
3.17 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 12" - 3-Pack - Black
Package of 3 Black 12"(30.5cm) long sections with a 1"(25.4mm) diameter that shrinks to 5/16"(7.9mm)
Wire Range: 2-4/0 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.59 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 12" - 3-Pack - Red
Package of 3 Red 12"(30.5cm) long sections with a 1"(25.4mm) diameter that shrinks to 5/16"(7.9mm)
Wire Range: 2-4/0 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.51 |
|
|
Foam Filter for AirForce Blaster Sidekick Dryer *3-Pack
Package of 3 foam filters. For use with the SK-1 and QD-1
Catalog P/N MVC-49BX
*Sold as an Individual
|
8.21 |
|
|
Foam Filter for DataVac® Electric Duster *3-Pack
Package of 3 foam filters. For use with the ED-500
Catalog P/N MVC-49ED
*Sold as an Individual
|
8.21 |
|
|
Foam Filter for Master Blaster® & AirForce® Commander Dryer *3-Pack
Package of 3 foam filters. For use with the ED-500 and AFTD-3
Catalog P/N MB-3CD
*Sold as an Individual
|
8.21 |
|
|
22-18 AWG Heat Shrink Butt Connector - 3 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #22-18 AWG
Insulation Color: Red
Max Wire Insulation Outer Diameter (inch): 0.19"
Package Size: Three
|
2.50 |
|
|
16-14 AWG Heat Shrink Butt Connector - 3 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #16-14 AWG
Insulation Color: Blue
Max Wire Insulation Outer Diameter (inch): 0.21"
Package Size: Three
|
2.54 |
|
|
22-18 AWG Heat Shrink Ring Terminal - #10 Stud Size - 3 Pack
Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.
Features:
Tinned copper
600 Volts
Operating temperature is -55°C to 125°C
Highly compliant
Benefits & Protections:
Solid connections
Extremely durable
Long-lasting
Tin-plated
Easy to install
Specifications:
Color: Red
Wire AWG: 22-18 AWG
Stud Size: #10
Terminal Pad Width (inch): 0.32”
Package Size: Three included
|
2.42 |
|
|
22-18 AWG Heat Shrink Ring Terminal - 1/4" Stud Size - 3 Pack
Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.
Features:
Tinned copper
600 Volts
Operating temperature is -55°C to 125°C
Highly compliant
Benefits & Protections:
Solid connections
Extremely durable
Long-lasting
Tin-plated
Easy to install
Specifications:
Color: Red
Wire AWG: 22-18 AWG
Stud Size (inch): 1/4"
Terminal Pad Width (inch): 0.48”
Package Size: Three included
|
2.35 |
|
|
22-18 AWG Heat Shrink Ring Terminal - 5/16" Stud Size - 3 Pack
Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.
Features:
Tinned copper
600 Volts
Operating temperature is -55°C to 125°C
Highly compliant
Benefits & Protections:
Solid connections
Extremely durable
Long-lasting
Tin-plated
Easy to install
Specifications:
Color: Red
Wire AWG: 22-18 AWG
Stud Size (inch): 5/16"
Terminal Pad Width (inch): 0.48”
Package Size: Three included
|
2.35 |
|
|
16-14 AWG Heat Shrink Ring Terminal - #10 Stud Size - 3 Pack
Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.
Features:
Tinned copper
600 Volts
Operating temperature is -55°C to 125°C
Highly compliant
Benefits & Protections:
Solid connections
Extremely durable
Long-lasting
Tin-plated
Easy to install
Specifications:
Color: Blue
Wire AWG: 16-14 AWG
Stud Size: #10
Terminal Pad Width (inch): 0.32”
Package Size: Three included
|
2.40 |
|
|
16-14 AWG Heat Shrink Ring Terminal - 1/4" Stud Size - 3 Pack
Ring terminals are used to connect wires to a connection point. They can easily be used with two or more wires. They offer a solid connection as the ring is fitted over a stud. This removes the possibility of the terminal disconnecting. Using the proper parts is essential to a high-quality electrical connection. Ring terminals are the most secure type of tongue-style terminal. They are known for their durability and ease of use.
Features:
Tinned copper
600 Volts
Operating temperature is -55°C to 125°C
Highly compliant
Benefits & Protections:
Solid connections
Extremely durable
Long-lasting
Tin-plated
Easy to install
Specifications:
Color: Blue
Wire AWG: 16-14 AWG
Stud Size (inch): 1/4"
Terminal Pad Width (inch): 0.48”
Package Size: Three included
|
2.40 |
|