Drain Port - 4" x 14" x 2"-Depth - White/Clear  Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are easy to clean. No water enters the boat when you open the port after a rain.  Beckson plastic portlights have a long history of excellent service and superior design features. They feature no corrosion, no condensation, no leaks, and no waterfall when you open the port. Features: Screen and exterior trim ring are included Replacement parts are readily available All Beckson Opening Ports are CE approved For replacing existing portlights, Beckson Fixed and Opening Ports are engineered to standard mounting hole sizes for interchangeability with other manufacturer's ports

Drain Port - 4" x 14" x 1"-Depth - White/Clear For ports mounted on a sloped surface. Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are easy to clean. No water enters the boat when you open the port after a rain. Beckson plastic portlights have a long history of excellent service and superior design features. They feature no corrosion, no condensation, no leaks, and no waterfall when you open the port. Features: Screen and exterior trim ring are included Replacement parts are readily available All Beckson Opening Ports are CE approved For replacing existing portlights, Beckson Fixed and Opening Ports are engineered to standard mounting hole sizes for interchangeability with other manufacturer's ports

4" x 14" Port Gasket Features: Gasket for all PO414 Series Ports Gasket only

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

Oberdorfer 600 Cent Pump Peo Brz 3/4 X 1/2  

Oberdorfer Cent Pump Ped Mnt 3/4 X 1/2 Ag Pump for Heat and Humidity Control Oberdorfer Ag pumps are the right product for the job. Our Ag pumps can pump fuel oil to the oil burner and heat water. Water Is heated to approximately 120 degrees Fahrenheit, and sprayed into the cotton batt, making it suitable for any need. Your company’s processing, bailing, and shipping efforts will be much more efficient after being outfitted with these hard working ag pumps.   Max Flow 25 GPM   Max Pressure 29 PSI   Rugged Bronze Construction Quiet Operation O-Ring Housing seal eliminates gasket problems Mechanical Seal - Carbon/Ceramic, Nitrile - standard, Fluoroelastomer (S10) or Polytetrafluoroethylene (PTFE) (S11) - options Designed for Pulley Drive Heavy Duty Integral Steel Shaft and Ball Bearings Handles Contaminated Liquids No bearing lubrication required

Oberdorfer Cent Pump Ped 3/4 X 1/2 FEATURES Pump Body: Bronze Ports: Inlet: 3/4" NPT, Outlet: 1/2" NPT Flow: 24 GPM Max Pressure: 23 PSI Max, 53 feet of head Impeller: Centrifugal Shaft Seal: Mechanical seal carbon/ceramic Buna Standard, Viton or Teflon Optional Shaft: Heavy Duty Integral Steel Shaft and Ball Bearings Motor / Drive: Designed for Pulley Drive.   BRONZE CENTRIFUGAL PEDESTAL PUMPS   The special pump alloys used provide corrosion resistance to many liquids including water, water solutions, and a wide range of commercial chemicals. Rugged bronze construction. A standard in the marine air conditioning, industry, and agriculture. Extremely quiet operation. O-ring housing seal eliminates gasket problems. Handles contaminated liquids. Discharge port orientation flexibility 8 positions. The 60P centrifugal pump has an external ball bearing isolated from the liquid being pumped. The ball bearing is greased and sealed for life, requiring no maintenance.

Installation Foam 1/4" x 1/2" x 8' 8' of Installation foam for hatch repair  Model years 1990 to present

ProPress 3/4" x 1/2" Copper Reducer - Double Press Connection - Smart Connect Technology Features: For use with ASTM B88 tubing Copper Press connection Components: EPDM sealing elements

MegaPress 3/4" x 1/2" Stainless Steel 304 Reducer - Double Press Connection - Smart Connect Technology Features: 304 stainless steel Press connection Components: FKM sealing elements

Hypro M3412 3/4 X 1/2 Mnpt Red Nipple

Cockpit Coaming Bolster Set (2) - 4" x 39" & 20mm Thick - White with Brushed Texture SeaDek Coaming Bolsters are a great alternative to traditional upholstered bolsters. Durable and easy to install, these bolsters will provide years of trouble-free service thanks to their closed-cell PE/EVA foam construction and robust pressure-sensitive adhesive. Each set contains two 4” x 39” bolsters that are 20mm thick. Specifications: Dimensions: 4″ x 39″ Material Thickness: 20mm Texture: Brushed Color: White Set of Two (2) *Two coaming bolsters are included in this set

Bow Roller - Yellow PVC - 4" x 1/2" ID Durable thermo plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. 2 sizes to fit bow stands with a 3” wide or 4” wide center roller bracket.

Mini Zinc Plate Anode 6" x 4" x 1/2" Features: Plate for hulls Material: Zinc Dimensions: 6" x 4" x 1/2"

Mini Aluminum Plate Anode 6" x 4" x 1/2" Features: Plate for hulls Material: Aluminum Dimensions: 6" x 4" x 1/2"