Rub Rail End Cap - 1-7/8" - Stainless Steel Stainless Steel Type 316 Polished Caps rub rail to finish end of rail and ensure that inserts stay intact. Features: Caps rub rail to finish end of rail Ensures inserts stay intact Offers a finished look Stainless Steel Marine Grade 316 Five year limited warranty

Polished Stainless Steel 2-19/64’’ Rub Rail End Cap Caps rub rail to finish end of rail and ensure that inserts stay intact. Features: Caps rub rail to finish end of rail Ensures inserts stay intact Offers a finished look Stainless Steel Marine Grade 316 Polished 5-Year limited warranty

Vinyl Rub Rail Kit - Black with Black Insert - 70' - 1-7/8" x 1-3/8" Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide Features: Black with Black Insert Vinyl Rub Rail Kit 70' 1-7/8" x 1-3/8"

Rub Rail Mounted LED Navigation Light Set - 2-1/2"  With constant innovation in mind, we've developed a line of Rub Rail-mounted LED navigation lights – sleek, low-profile lights designed to allow for cleaner, open decks with non-obstructed view points. Very popular with bay boats, these easy-to-install lights meet ABYC and USCG requirements for both sail and powerboat designation, have a water-resistant IP68 rating and provide hours of maintenance-free, reliable use.  Features: Ideal for up to 30-foot boats and designed to fit the popular 3/4-inch insert profiles Special order item sold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) light Brightness compares to 10-watt incandescent light Enables more deck space and easy to install Provides a 120-degree unobstructed view with less glare Meets ABYC/USCG requirements for both sail and powerboat designation Low-voltage 12-14VDC Anodized aluminum heat sink for maximum heat dissipation LED lights are mounted in a heavy gauge polished stainless-steel joiner cover Water-resistant IP68 rating Takes a 1-inch #8 stainless-steel fastener (not included) Comes with detailed installation instructions 1-year limited warranty

Command Ratchet Hinges - 18-1/2" - 316 Stainless Steel - Pair Because of the success of the popular 9-3/8" long Command Ratchet Hinge, TACO developed the 18-1/2" long counterpart for longer applications. This heavy-duty, extended specialty hinge has one locking position at 105 degrees and is perfect for sun pads, bolsters, and lounge backrests. Features: Polished stainless-steel Type-304 Mounts above the deck  One locking position at 105-degrees  Can be used for seat backs up to 22" long  Single or double-seat capacity  Meets ABYC H-31 standards class B* application, 500 ft-lb. of torque load for pair  500-hour salt fog test  For cushions up to 4" thick  5-year limited warranty *Sold as a pair

Marine Kettle® Bulkhead or Square/Flat Rail Mount  This all 18-8 stainless steel mount attaches to any vertical flat surface such as bulkheads, hulls, transoms or cabin sides.  Also mounts to square or flat rails.  Fits horizontal rails up to 2-1/4" (57 mm) high by any depth or vertical  up to 1- 5/8" (41 mm) wide by any depth.   Rod portion of mount quickly disconnects for easy storage.  Some fasteners required for installation. Compatible With: Marine Kettle® Grills *Sold as an Individual 

Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/4" Inner Diameter Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat? Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, Barbed Standard Thread model has a full-length thread for thick hulls and easy tightening Specifications: Hose size: (inch) 1-1/4" inner diameter Flange Diameter: (inch) 2-1/4" Thread O.D. (outside diameter): (inch) 1-5/8"  Thread Length: (inch) 2-1/2" Barb Length: (inch) 1-1/4" Total Length: (inch) 4-1/4" Install Hole Saw Size: (inch) 1-3/4"  Thread NPSM: (inch) 1-1/4" Max Hull Thickness: (inch) 1-7/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only

Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/2" Inner Diameter Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat? Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, Barbed Standard Thread model has a full-length thread for thick hulls and easy tightening Specifications: Hose size: (inch) 1-1/2" inner diameter Flange Diameter: (inch) 3" Thread O.D. (outside diameter): (inch) 1-7/8"  Thread Length: (inch) 2-1/2" Barb Length: (inch) 1-1/4" Total Length: (inch) 4-1/8" Install Hole Saw Size: (inch) 2"  Thread NPSM: (inch) 1-1/2" Max Hull Thickness: (inch) 1-7/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only

Rub Rail Mounted Navigation Lights for Boats Up To 30' - Port & Starboard Included TACO's latest addition to its Rub Rail offering is the Rub Rail Mounted LED Navigation Light. These sleek, low-profile lights are mounted onto a heavy gauge Stainless Steel cover designed to fit several of Taco Marine's most popular Rigid Vinyl Rub Rail profiles that are ideal for 18' to 30' boats. Features & Benefits: 3-Watt Port (Red) and Starboard (Green) LEDs Low-draw, less than 0.25 Amperes Enables more deck space Easy installation Stainless Steel High Polish Reliable long-life LEDs will increase hours of maintenance-free service Designed to fit the popular Taco Marine V21-9659, V21-9904, V21-9909, and V21-9959 Rub Rail profiles For use on up to 30' boats 112.5° unobstructed view, with less glare Meets ABYC-USCG requirements Low-voltage 12-14VDC Anodized aluminum heat sink for maximum heat dissipation LED lights are mounted in a heavy gauge polished Stainless Steel joiner cover Water-resistant, IP68 rating Takes a 1" - #8 Stainless Steel fastener (not included) Kit Includes: Set of two LED navigation light assemblies, Port (Red) and Starboard (Green) Installation Instructions

Top Cap - Fits 7/8" Tube Features: Offered for 7/8" tube  Available with pop-rivet and set screw  Polished finish Fastener: Set Screw

90° Top Cap - Fits 7/8" Tube Features: Offered for 7/8" tube Available with pop-rivet and set screw Polished finish Fastener: Set Screw 90°

Flex Vinyl Rub Rail Kit - Black with Black Insert - 70' - 1-7/8" x 1-1/16" Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.. Features: Black with Black Insert Vinyl Rub Rail Kit 1-7/8" x 1-1/16" 70'

Rub Rail Mounted LED Nav Light Set for SuproFlex Only The Rub Rail LED Navigation Light is designed specifically for SuproFlex! This sleek, low-profile navigation light fits V11-9960, V11-9990, and V11-9950 (OEM only) SuproFlex profiles, meets ABYC and USCG requirements for both sail and powerboat designation, and has a water-resistant IP68 rating for hours of maintenance-free use.  Features: Ideal for boats up to 30' Sold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) light Brightness compares to 10-watt incandescent light Enables more deck space Easy to install Provides a 112.5-degree unobstructed view with less glare Meets ABYC/USCG requirements for both sail and powerboat designation Low-voltage 12-14VDC Anodized aluminum heat sink for maximum heat dissipation Water-resistant IP68 rating Uses #8 stainless steel fasteners, not included 1-year limited warranty Patent number USD760427

Flex Vinyl Rub Rail Kit - Black with Black Insert - 50' - 1-7/8 X 1-1/16"" Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide. Features: 1-7/8" X 1-1/16" Black with Black Insert

Flex Vinyl Rub Rail Kit - Black with Black Insert - 50' - 1-7/8" X 1-3/8" Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide Features: 1-7/8" X 1-3/8" Black with Black Insert