Ribbed Type Rowlock Horns - Chrome Plated Zinc - Pair Specs: Finish: Chrome Shank O.D.: 1/2" Shank Length: 1-3/4" Between Horns: 1-3/4"

Round Type Rowlock Horns - Chrome Plated Zinc Features: Chrome plated zinc alloy Shank O.D.:1/2" (1.3cm) Shank Length: 1-3/4" (4.4cm) I.D. Horns: 2" (5.1cm)

Open Base Cleat Chrome Plated Zinc Alloy Length Overall: 4" Dimensions Base: 2-1/8" x 1-1/2" Max Rope Size: 5/16"

Round Type Rowlock Horns - Plain Zinc Features: Natrual finish zinc alloy Shank O.D.:1/2" (1.3cm) Shank Length: 1-3/4" (4.4cm) I.D. Horns: 2" (5.1cm)

Surface Mount Drawer Pull - Chrome Plated Zinc Specs: Chrome Plated Zinc Alloy Overall Width: 3-7/16" Inside Width: 2-5/16" Screw Size: 6

Swivel Eye Hasp - 3" - Chrome Plated Zinc Features: Chrome Plated Zinc Alloy Padlock eye swivels to act as a latch Specs: Closed Length: 3" Width: 1" Padlock Clearance: 11/32" Screw Size: 6

Open Base Cleat Chrome Plated Zinc Alloy Length Overall: 6" Dimensions Base: 3" x 1-3/4" Max Rope Size: 7/16"

Open Base Cleat (1188) Chrome Plated Zinc Alloy Length Overall: 8" Dimensions Base: 4" x 2-1/8" Max Rope Size: 5/8"

Flush Pull Chrome Plated Zinc Alloy Black Polymer Finishing Flange Spring Loaded, Can be mounted Horizontally or Vertically

Red/Green Horizontal Mount Side Lights - Pair - Chrome Plated Zinc This Perko light is certified for use on power-driven vessels under 20 meters (65.6 feet) in both the USA and European markets. Features: Chrome-plated zinc alloy top with black polymer base High-tech, self-contained LED modules Same footprint as the 0627/0628 incandescent lights (wiring hole and mounting screw locations may vary) 2-mile (USCG 2nm) certified Specifications: Voltage: 12 Volt LED Wattage: 2.5 watts Amperage: 0.21 amps Dimensions (L x W x H): 3-3/8 in. x 2-1/2 in. x 1-1/2 in. Screw Size: #6 Finish: Chrome Meets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm NMMA Type Accepted Number: 2619658 *Sold as a pair

Bi-Color LED Horizontal Mount - Chrome Plated Zinc This Perko light is certified for use on power-driven vessels under 20 meters (65.6 feet) in both the USA and European markets. Features: Chrome-plated zinc alloy top with black polymer base High-tech, self-contained LED modules Same footprint as the 0627/0628 incandescent lights (wiring hole and mounting screw locations may vary) 2-mile (USCG 2nm) certified Specifications: Voltage: 12 Volt LED Wattage: 2.5 watts Amperage: 0.21 amps Dimensions (L x W x H): 3-3/8 in. x 2-1/2 in. x 1-1/2 in. Screw Size: #6 Finish: Chrome Meets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm NMMA Type Accepted Number: 2619657

Cowl Ventilator (0870) Chrome Plated Zinc Alloy Cowl with Black PERKO-KOTE Base 3" Duct Thread into Neck, Hose Clamps Not Required Cowl Opening Square: 7-1/3"

Perko Rectangular Plug-In Base f/Pole Cards - Chrome Plated Zinc/Black Features: Plain black cap, chrome plated zinc alloy Black polymer base Pigtail leads Fits 1343, 1348, 1400, 1451 and 1470 Series All-Round Pole Lights Specs: Number of Pins: 2 Base Dimensions: 3-3/4" x 1-5/8" Tube Angle: 16° Screw Size: 8

Fishing Rod Holder - 65° Angled Flush Mount - Chrome Plated Zinc Features: Chrome Plated Zinc Alloy Flange Angled Flush Mount (Approximately 65°) Anodized Aluminum Tube Soft Black Liner Flange Gasket with Integral Flip-Up Cap D01 & DPD - Integral Drain Bib or 5/8 Inch I.D. Flexible Hose Specs: Mount Type: Angled Drain Bib: No I.D. Tube: 1-5/8" O.D. Tube: 2" Length Under Flange: 8" Flange: 4-1/4" x 3-1/2"

Chrome Plated Zinc Hasp - 3" Features: Chrome Plated Zinc Alloy Length Closed: 3" Width: 1" Padlock Clearance: 1/4"