Description: Plate - 2-3/4" x 1-1/4" Material: 304 Stainless Steel Stock: 3/8" Eye Ring Diameter: 1" Thread Length: 3-7/16"

Stainless Steel Bow Eye - 3/8" x 4-1/4" These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly.

Fixed Anchor Swivel - 3/8" to 7/16" Heavy-duty 360-degree anchor swivel.  Used to attach line and chain or chain and anchor. Compatible with: 3/8" to 7/16" Chain Features: Stainless Steel screw pins Stainless Steel swivel pins Technical Specifications: Material - 316 Stainless Steel *Sold as an Individual

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 7/16"–21/32" Clamping Range - 10-Pack - SAE Size 4 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp. Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 4 Hose Inner Diameter: (inch) 1/4" – 5/16" Clamping Range: (inch) 7/16" – 21/32"  / (mm) 11-17 Recommended Torque Inch lbs: 25-35

Quick Release Pin - 3/8" x 13/16" Specifications: Diameter: 3/8" Grip Length: 13/16" Use with: O2 Series

Description: Plate: 3/4" x 2-1/4" Material: 304 Stainless Steel Stock: 3/8" Eye Ring Diameter: 1" Thread Length: 3-7/16"

Description: Plate: 3/4" x 2-1/4" Material: 304 Stainless Steel Stock: 3/8" Eye Ring Diameter: 1" Thread Length: 2-1/2"

Description: Plate: 3/4" x 2-1/4" Material: 304 Stainless Steel Stock: 3/8" Eye Ring Diameter: 1" Thread Length: 3"

Description: Plate - 3-1/2 x 1-1/2" Material: 304 Stainless Steel Stock: 1/2" Eye Ring Diameter: 1-1/2" Thread Length: 3-7/16"

Hinged Pad Eye- 3/8" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.  Specifications: T-316 Stainless Steel construction Supplied with backing plate

Stainless Steel Welded Pad Eye - 3"L x 1"W Specifications: Eye Width 7/8" (22 mm) Eye Height 7/8" (22 mm) Eye Stock 1/4" (6 mm) Length 3" (76 mm) Width 1" (25 mm) Fasteners (2), 1/4" RH (6 mm) C/C 2-3/16" (55 mm) SWL 2500 lbs. (1135 kg) Weight 3.25 oz. (92 g) 

HydroPlane Plates - 8" x 7.5"  The HydroPlane system features dynamic hinge technology that reacts to water pressure and boat speed to produce a smoother ride and better handling.   Thermo-molded composite construction provides superior strength and resilience in any water conditions. The autonomous trim plates become an extension of the boat’s running surface and require no external activation.  For overall stability, faster time to plane, and elimination of common problems like porpoising and chine walking, HydroPlane provides the port-to-starboard balance that hydrofoils cannot. Features: No maintenance  No pilot interface Faster time to plane Uses hydrodynamic lift Up to 50% more effective than Hydrofoils Creates balance Reduces fuel consumption Technical Specifications: Trim Tab Size (L x W) - 7.5" x 8.25"  Boat Length - Under 16'  Trim Tab Material - Polypropylene with Glass Fill  In the Box: Two (2) plates/tabs Mounting hardware Instruction manual  *Sold as a Pair

Goulds 2K1023-4 7/16 Impeller  

Fender Line - 3/8" x 5' - White - 2-Pack Our MFP Fender Lines are strong, available in multiple colors and float along the surface of the water. They may be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable.

Fender Line - 3/8" x 5' - Royal Blue - 2-Pack Our MFP Fender Lines are strong, available in multiple colors and float along the surface of the water. They may be used for twin eye or center hole fender applications, are easily adjustable and will remain soft and pliable.