|
Size 54 Medium Profile Hatch
Ideal as a foredeck hatch on larger offshore yachts, the Medium Profile has thicker acrylic and deeper frame sections for greater strength and durability. It features Lewmar’s unique sealing system, allowing for easy acrylic replacement. All while retaining the smooth, modern lines of the low-profile hatch.
Features:
Outside handles allow the hatch to be opened from the deck if it is not locked
Friction levers hold the lid open in any position up to 95°
Anodized aluminum frame for corrosion resistance
Curved upper frame profile for strength as well as modern styling
A full range of spare parts is available
Specifications:
Lower Frame: 9/16 in.
Acrylic Color: Smoke Grey
Hatch Weight: 14.3 lb.
Acrylic Window Thickness: 1/2 in.
Length: 18-1/4 in.
Width: 22-3/4 in.
Height: 1-1/4"
Radii R: 2-7/8 in.
Cut-Out Length: 15-7/16 in.
Cut-Out Width: 19-15/16 in.
Cut-Out Radii R1: 1-11/16 in.
|
687.73 |
|
|
Size 44 Low Profile Hatch Seal Kit
Replacement seals for the Low Profile hatch range. Works by holding the Acrylic pane into the frame.
In the Box:
Gasket
Instruction manual
*Sold as an Individual
|
41.64 |
|
|
Size 10 Low Profile Deck Hatch
The Low Profile Hatch has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid-size yachts.
Features:
Outside handles allow the hatch to be opened from on deck if it is not locked (Sizes 00, 03,10, 20 & 41 have no outside handle and can only be opened from the inside.)
Low profile hatches open up to 180° (round hatches open to 170°)
Friction levers hold the lid open in any position up to 95°
Anodized aluminum frame for corrosion resistance
Curved upper frame profile for strength as well as modern styling
Technical Specifications:
Support System - Self-supporting
Color - Smoke Grey
Weight - 4.9lbs
Dimensions (L x W x H) - 13" x 13" x 1"
Cut-Out Dimensions (L x W) - 10.25" x 10.25"
*Sold as an Individual
|
347.47 |
|
|
White Trim Ring & Screen Kit
Trim kits offer an easy and attractive approach to complete the installation of a hatch inside the cabin. The kits, which are manufactured of ABS plastic, include a trim piece and a hinged (and detachable) flyscreen to keep mosquitoes and other pesky insects out of the boat. The hatch latches may be accessed easily thanks to the hinged screen.
Features:
White trim ring and screen kit for Lewmar hatch size 54
Can only be fitted to boats with a headliner
The trim flange can be cut to length to suit a range of deck thicknesses up to 2-7/16 in. for low/medium profile hatches, and 2-13/16 in. for flanged ocean hatches
Can't be used on flat base ocean hatches
|
186.41 |
|
|
Dual Actuator Marine Hardware Pack
High quality dual actuator hardware kit. This hardware bag is required in order to install hydraulic dual actuator systems. Includes: additional pipe nipples and brass "T" fittings.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.40 |
|
|
Marine Kettle® Round Rail Mount - Oversized Rails
This round rail, quick-disconnect, all angle mounting bracket is made entirely of 18-8 stainless steel and 356 anodized aluminum to endure the most severe marine environment.
Fits any vertical, horizontal, or angled railing and detaches quickly for storage without tools leaving no hardware on the rail.
Fits rail size - 1-1/8" to 1-1/14" (2.86 to 3.18 cm)
Compatible With:
Marine Kettle® Grills
*Sold as an Individual
|
95.99 |
|
|
Marine / Boat Hardware
We offer a full selection of marine hardware, including anchor rollers, anodes, ski tows, vents, and more. If you have a boat and need hardware, you are in the right place. From chocks and cleats to shaft seals and steering wheels, you can count on us for your boat hardware needs. It can sometimes be difficult to find everything you need for your boat, especially all in one place, but our full service site gives you plenty of excellent options for all the hardware you will need for your boating excursion.
Bow & stern eyes, deck fills, deck plates, and engine mounts are all available here, along with gas springs, grab handles, and hatches. We also have a wide assortment of hinges, hooks & clamps, and latches so you can find just the right option for your boat. With oarlocks, rail fittings, rub rail, shaft couplers, and swim platforms, as well as a selection of rope & chain pipe, you can find the things you need the most. We also have a selection of marine lumber, including teak. By using teak lumber for your marine needs, you have a great wood look that will hold up to the elements, and you can get it right here with all your marine hardware.
|
|
|
Since 1946, Lewmar has dedicated itself to making spending time on the water as easy and stress-free as possible; designing and manufacturing innovative and reliable products of the highest quality. With a portfolio of hardware, winches, hydraulics, windlasses, anchors, thrusters, steering systems, hatches, and portlights to suit every boat from the smallest day fisher to the largest mega-yacht, Lewmar can supply a complete solution whatever your project and requirements.
Windlasses
Whether you own a small fishing boat or a 160' cruiser, Lewmar has a windlass designed to fit your exact needs. Integral to the designs are high-quality stainless steel components, providing longevity and reliability. Both our vertical and horizontal designs are sleek and attractive to complement your boat.
Anchors With a wide range of styles available, Lewmar anchors cater to all boat types including power and sail from 18' to 250'. Smaller boats can utilize the folding designs for ease of storage; larger vessels can fit an integrated Lewmar anchor and bow roller solution.
Specials Closeouts Remanufactured Rebates
|
|
|
Size 70 Flush 2G Deck Hatch
Lewmar pioneered the high-volume flush hatch platform back in 2006, bringing what was then Superyacht styling into mainstream boat production. The precision of the fit makes for a sleek, modern look and means no more stubbed toes for boat owners.
Features:
Clean aesthetics
EPDM seal provide completely watertight structure
Water drained effortlessly away by deck-moulded channels
Strong, stylish handles and hinges
Trimkit fits all standard sizes
Dark grey acrylic option keeps cabin cooler
Technical Specifications:
Support System - Stay x two (2)
Color - Dark Sport Tint
Dimensions (L x W x H) - 25.5" x 27.5" x 1.25"
Cut-Out Dimensions (L x W) - 24.7" x 24.7"
*Sold as an Individual
|
1235.51 |
|
|
Size 60 Ocean Hatch - Flange Base
With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face.
Features:
Friction levers hold the lid open in any position up to 95°
Anodized aluminum frame for corrosion resistance
All sizes suitable for CE Area 2 (Deck, Coach roof, Cockpit, and Transom)
Technical Specifications:
Support System - Friction Lever
Color - Smoke Grey
Window Thickness - .5"
Weight - 17.6lbs
Dimensions (L x W x H) - 22-5/8" x 22-5/8" x 1-11/16"
Cut-Out Dimensions (L x W) - 19-15/16" x 19-15/16"
*Sold as an Individual
|
977.33 |
|
|
MAGNUS Escape Hatch - OD 22-3/16" x 22-3/16"
Heavy Duty Ocean Hatch
MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck.
These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are current in the market.
Features:
External Dimensions - 22 3/16" x 22 3/16"
Cut Out Dimensions - 19 15/16" x 19 15/16"
Number of Handles - 4
*VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
596.88 |
|
|
MAGNUS Ventilation Hatch - OD 12-5/16" x 12-5/16"
Heavy Duty Ocean Hatch
MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck.
These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are currently in the market.
Features:
External Dimensions - 12 5/16"" x 12 5/16"
Cut Out Dimensions - 10 1/4" x 10 1/4"
Number of Handles - 1
*VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
317.52 |
|
|
MAGNUS Escape Hatch - OD 26-3/4" x 26-3/4"
Heavy Duty Ocean Hatch
MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck.
These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are currently in the market.
Features:
External Dimensions - 26 3/4" x 26 3/4"
Cut Out Dimensions - 24 11/16" x 24 11/16"
Number of Handles - 4
*VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
758.88 |
|
|
Flush Pull Latch - Push To Close - Medium - White
Specifications:
Material: Plastic
Material Grade: PC / PBT Blend
Finish: Natural
Color/Appearance: White
Access Restriction: No Restriction
Grip Range: 25.000-26.000 mm (0.98-1.02 in)
Panel Thickness: 2.000-7.000 mm (0.08-0.28 in)
Profile: Low Profile
Size Series: Medium Size
Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.
|
16.20 |
|
|
Size 0 Ocean Traveler Kit - 2:1 Purchase System
Lewmar makes selecting your mainsheet system simple - with complete Mainsheet System Kits. Lewmar's Size 0 Ocean Mainsheet System is a complete kit made specifically for yachts up to 28 feet (8.5m.)
Features:
Smooth, clean profile with no visible fasteners
Fast, functional, and attractive
Easy to retro-fit new track to the deck using original bolt holes
Technical Specifications:
Designed for boats up to 28 feet (8.5m) long
Safe working load - 990 lbs (400kg )
Max Mainsail Area (End Boom) - 16 m²
Max Mainsail Area (Mid Boom)- 12 m²
Provides a 2:1 Purchase system
In the Box:
29030100BK 1 x Mainsheet car
29170040BK 2 x Simple end stop
29160112 1 x 1.2m Sliding bolt track
29171010 1 x Size 1 Dead eye
29104100BK 2 x Small composite cleat
29904104 2 x Small cam fairlead
*Sold as a Kit
|
303.49 |
|