Charging Handset Cradle for Cortex H1P Portable Handset Mount your H1P (portable) handset anywhere on the boat where 12-24vDC can be reached. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. The charging connectors are gold-plated preparing for the elements and suitable for mounting outdoors.

Non-Powered Handset Cradle for Cortex H1 Tethered & H1P Portable Handset Mount your handset anywhere on the boat with the non-powered handset cradle. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. Pair with a RAILBLAZA or RAM Mount style adapter to use with your favorite mounting solution. The non-powered handset cradle can be used with either the H1(tethered) or H1P (portable) handsets.

Cortex H1P Portable/Wireless/Rechargeable Handset with Charging Cradle For the ultimate safety, add a battery-powered rechargeable handset to your Cortex. Have situational awareness and VHF communication at your fingertips, no matter where you are on your boat. Features: Rechargeable, the portable battery-powered handset for connection to Cortex M1 4-inch multi-touch display with gorilla glass for maximum durability Single hand operation with the unique click wheel and dedicated buttons Wet and gloves capable touchscreen Optically bonded display for wide-angle and sunlight viewability, even in the harshest midday sun. 85 dBA of crystal-clear audio Combined AIS and VHF display with voiced alerts Touch a vessel onscreen for direct calling (DSC) Add 10 handsets to Cortex M1 What's In The Box? H1P Portable Rechargeable Handset Charging H1P Cradle Non-Powered H1 Cradle Specifications: Size: 164.8 mm x 71.8 mm x 21.4 mm (6.4882” x 2.8268” x 0.8425”)  Power Supply: 12V, 1A max, 200mA nominal, 12 -24V compatible  Battery: Lithium Polymer, 2 hour full charge, >12 hours nominal operation  Weight: 235g Environmental: Waterproof (IPX7) Operating Temperature:  -25°C to +55°C (-13°F to 131°F)  Audio: 3W Class D amplifier, THD < 5% @ 85dBA  Display: Screen: LCD TFT Si, 640 x 800, 24bit Color  Touch: Capacitive, optically bonded to LCD. Glove and salt water operable  Backlight: 600 cd/m2 Ambient light sensor for auto dimming

Bulkhead Connector Kit for Cortex H1 Adding a station for your Cortex H1 is as easy as mounting the bulkhead connector kit and connecting it to 12-24 VDC.

RAM EZ-ROLL'R Cradle f/Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite

RAM Tab-Tite Universal Clamping Cradle f/Google Nexus 7 w/ or w/o Light Duty Sleeve The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 7" minimum to 8.875" maximum Width: maximum to 4.7" Depth: maximum to 0.43" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

Tilt/Swivel Mount with Quick-Release Cradle f/echoMAP™ Plus 7Xsv Surface mount your compatible echoMAP Plus chartplotter/sounder combo using our bail mount with knobs; the mount tilts and swivels for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM EZ-ROLL'R Cradle f/SPOT Gen3 This RAM high strength composite cradle is designed to hold the following devices: SPOT Gen3 Features: Open access to all electronic ports Patented roller design for super smooth placement and removal of the SPOT Gen3 Form fitted cradle supports and protects device without vibration High strength materials ensure product longevity Lifetime warranty Made in the U.S.A. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 12"  Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 10"  Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge Cases The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: 10" Screen Tablets with LifeProof nüüd cases 10" Screen Tablets with Lifedge cases 10" Screen Tablets with heavy duty cases The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 8.75" minimum to 10.75" maximum Width: maximum to 8.25" Depth: maximum to 1.1" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tab-Lock Universal Locking Cradle f/Apple iPad w/LifeProof & Lifedge Cases The RAM-HOL-TABL17U consists of a spring loaded back plate, custom support cups and locking mechanism. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad secure and safe from theft. The RAM Tab-Lock cradle is compatible with the following tablets: 10" Screen Tablets with LifeProof nüüd cases 10" Screen Tablets with Lifedge cases 10" Screen Tablets with heavy duty cases Tab-Lock Cradle Dimensions: Height: 8.75" minimum to 10.75" maximum Width: maximum to 8.25" Depth: maximum to 1.1" Tab-Lock Cradle Features: 1. Locking mechanism for theft deterrence 2. Support cups contain open slots to accommodate for tablets of various sizes 3. Back plate can support various size support cups 4. Spring loaded tension provides secure support for your tablet 5. Spring loaded cradle allows for quick release of your tablet 6. High strength materials maximize longevity of cradle 7. Full access to all ports 8. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

Tab-Lock™ Locking Cradle f/Apple iPad mini 1-3 with Case, Skin & Sleeve The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini WITH skin, sleeve or case. This spring loaded design makes it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. Quickly lock the cradle, keeping your iPad mini secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 6.75" to 8.75" Width: 5.06" to 5.68" Depth: 0.13" to 1" Note: Product consists of holder only. Case not included. Features: 1. Locking mechanism for theft deterrence 2. Support cups contain open slots to accommodate for tablets of various sizes 3. Back plate can support various size support cups 4. Spring loaded tension provides secure support for your tablet 5. Spring loaded cradle allows for quick release of your tablet 6. High strength materials maximize longevity of cradle 7. Full access to all ports 8. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The RAM-HOL-TABL12U is not compatible with the iPad mini 1-3 with LifeProof case. Weight: 1.15 lbs.

Double Twist-Lock™ Suction Cup Mount w/Tab-Tite™ Universal Spring Loaded Cradle f/Apple iPad 1-4 with or without Light Duty Case The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 8.5" to 11.125" Width: 6.38" to 7.75" Depth: 0.13" to 0.56" Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty 8. Made in the U.S.A. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.8 lbs.

RAM EZ-ROLL'R Model Specific Cradle f/Apple iPad 4, iPad 3 and iPad 2 w/o Protective Case The RAM-HOL-AP15U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure when on the go. Multiple AMPs hole patterns found on the back of the cradle, make it convenient for attaching various mounts for perfect articulation and viewing angles. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The RAM-HOL-AP15U DOES NOT contain the patent pending Uni-Conn™ docking connector; however, an open space is allocated for free attachment to various cable/docking connectors. Specifications/Features Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Multiple attachment hole patterns for convenient articulation and viewing angles 6. Lifetime warranty 7. Made in the U.S.A. Material: High Strength Composite