|
Cradle f/8 Man Liferaft
Features:
For RescYou™ & RescYou™Pro, UKL 6 and 8 person yachting liferafts, UKSL 4, 6 and 8 person yachting liferafts
Complete with lashings
|
393.34 |
|
|
Cradle f/4 & 6 Man Liferafts
Cradle for RescYou™ UKL 4 and UKCL 6 persons yachting
Complete with lashings
|
393.34 |
|
|
Tab-Tite™ Cradle f/8" Samsung Galaxy Tab A & S2 8.0 w/Case
The RAM® Tab-Tite&$153; spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab A 8.0, Tab A 8.0 with S Pen Tab S2 8.0 with Otterbox Defender case. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions.
Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Cradle Dimensions:
Height: 8.25" to 11"
Width: 5" to 5.88"
Depth: 0.3" to 0.67"
Features:
Support cups are designed to offer access to ports and tablet functions
Modular design makes upgrading to a new tablet simple and cost effective
Dual-spring loaded tension provides secure support for your tablet
Easy, quick release of your tablet for on-the-go applications
Versatility of cradle allows for attachment to many RAM mounting solutions
Lifetime warranty
Made in U.S.A.
Material:
High Strength Composite
Weight:
0.69 lbs.
|
24.59 |
|
|
Stainless Steel Cover f/Duplex Receptacle w/Lift Lid
This 302 stainless steel sealed cover with lift lid fits 4700CR, 5262CRR and 5739CR duplex receptacles.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.20 |
|
|
Stainless Steel Dimmer f/LED Lights w/On-Off Feature
LED Continuous Adjustment Dimmer Switch is constructed of 304 stainless steel and features easy-to-use color coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. A short press turns the light on and off, then a longer press activates the dimming/brightening function. Memory function turns the light back on at the same brightness level as when it was turned off. 1.5A max. 12VDC. IP67 waterproof rating.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.51 |
|
|
Butt Hinge 90° Offset
Length:1-3/8"
Width:1-1/2"
Fastener:#8 FH
Material: 304 Stainless Steel
Offset: 3/8"
|
11.17 |
|
|
Rail Base Fitting Rectangular Base 60° 316 Stainless Steel - 1-7/8" x 3-1/4" - 1" OD
These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included).
*Stainless tubing with a wall thickness of 0.049”
|
18.47 |
|
|
Rail Base Fitting Rectangular Base 90° 316 Stainless Steel - 1-7/8" x 3-3/16" - 1" OD
Replacement rail base fitting.
Features:
Constructed of corrosion resistant investment cast 316 stainless steel.
Stainless tubing with a wall thickness of 0.049”
Installs with four FH fasteners (not included).
∗Sold as an individual
|
17.53 |
|
|
Rail Base Fitting Rectangular Base 30° 316 Stainless Steel - 1-7/8" x 32-3/16" - 1" OD
These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”.
Features:
Investment Cast 316 Stainless Steel
30° Rectangular Base
1" Tube OD
Base: 1-7/8" x 3-3/16"
Fastener: 1/4" FH
|
17.40 |
|
|
Hand Rail Tee 316 Stainless Steel 90° - 7/8"
These Hand Rail Tee fittings create directionality in hand rail applications. Includes set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. *Stainless tubing with a wall thickness of 0.049”.
|
14.22 |
|
|
Kitchen Cookware Pan Set Self-Containing - Stainless Steel - Set of 8
Lacking space in the kitchen on your boat?
Choose the self-containing kitchen pan set by Marine Business and the problem is solved. All the pieces in the set fit inside the largest piece so the whole set only takes up the space of the biggest pan and you save space in the kitchen.
The biggest pan is held with hooks as a cover, taking up very little space and stopping the pieces from moving about in the drawers.
The set of 8 pans is made of top-quality stainless steel and has a heat diffusing bottom suitable for gas, ceramic hob, and induction.
This set includes a strainer that can also be used for steam cooking. Also available: the 6 piece set.
Usage:
Made in stainless steel 18/10. Suitable for ceramic hob, induction, and gas. Before using it for the first time, take off all the labels. Wash the pieces in hot water with detergent. Rinse well in clean water. Dry with a soft cloth. When washing the pieces do not use strong detergent or abrasive pads.
|
414.25 |
|
|
Sure-Grip Stainless Steel Rod Holder - 8" & 5-Degree Angle
Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.
Specifications:
Angle: 5-degrees
Stem Length: 8 inches with wing nut
Use for: Horizontal rod position with added clearance
Includes: 5071 mounting base
|
14.57 |
|
|
Tab-Tite™ Cradle for 8" Tablets - Samsung Galaxy Tab 4 8.0 & Tab E 8.0
The RAM® Tab-Tite™ spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 8.0, Tab S 8.4, Tab E 8.0 and Tab A 8.0 (2017). The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions.
The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Cradle Dimensions:
Length: 8.08" to 10.69"
Width: 3.77" to 4.96"
Depth: 0.13" to 0.36"
Features:
1. Support cups are designed to offer access to ports and tablet functions
2. Modular design makes upgrading to a new tablet simple and cost effective
3. Dual-spring loaded tension provides secure support for your tablet
4. Easy, quick release of your tablet for on-the-go applications
5. Versatility of cradle allows for attachment to many RAM mounting solutions
6. Lifetime warranty
7. Made in U.S.A.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.5 lbs.
|
23.89 |
|
|
Spring Clamp - 304 Stainless Steel - 2-1/4"
Whitecap Marine Hardware is made from the highest quality materials. Whitecap's stainless steel products are manufactured from corrosion resistant 316 Stainless Steel and polished for a long lasting shine. When you want the best for your boat...ask for Whitecap.
Features:
Length: 2-1/4"
Extension: 1" to 1-3/4"
Fastener: #6 (2)
Material: 304 Stainless Steel
|
5.62 |
|
|
Stainless Steel Cap for Oval Plastic Rod Holders
Features
For use with P2030B and P2030W
For plastic rod/cup holders with oval top
|
7.39 |
|