Ultra Safety Systems Hi Diff Switch PS-04 12V ULTRA PUMPSWITCH Hi DIFFERENTIAL 1 inch greater difference in on/off setpoints than UPS-02 (2 1/4 inch differential)  Eliminates cycling associated with longer discharge lines and deep bilge sumps.  12 Volt  5 year warranty

Ultra Safety Systems US Ultimate JR Bilge Switch 12V ULTRA PUMPSWITCH JR Automatic bilge pump switch. 6 1/4 inch high and 2 1/2 inch diameter (1 1/4 inch ON/OFF differential). 12 Volts at 15 Amps 5 year warranty

Ultra Safety Systems Ultimate Mini Bilge Switch 12V ULTRA PUMP SWITCH MINI 4 inch high, 1 3/4 inch diameter, 3/4 inch ON/OFF differential 12 Volts/40 Amp relay 20 Amp continues pump load With Magnetic Test Switch 5 year warranty

Ultra Safety Systems US Ultimate SR 12V Bilge Switch ULTRA PUMPSWITCH SR Automatic Bilge pump operation (1 1/4" differential) with isolated high water alarm switch (at 3"), built-in. 12V at 15Amp. Alarm circuit is Normally Open or Normally Closed contacts (current limited to 100 mA max).  Lifetime warranty.

Ultra Safety Systems High Water Alarm A201 ULTRA BATTERY ALARM Recess Mount Extra Loud 103 db high water alarm. Test, mute and red LED indicator light. Complete alarm package. Use with PS-01 and PS-03. Operating time-40 hours. Uses two 9 volt batteries (Not included)

Ultra Safety Systems Ultimate SR 24/32 Volt Bilge Switch ULTRA PUMPSWITCH SR Automatic Bilge pump operation (1 1/4" differential) with isolated high water alarm switch (at 3"), built-in. 24/32V at 10 Amps U.L.(30 Amps relay). Alarm circuit is Normally Open or Normally Closed contacts (current limited to 100 mA max).  Lifetime warranty.

Ultra Safety Systems High Water Alarm Switch 12/24 Volts ULTRA ALARM SWITCH Normally Open or Normally close contact for high water alarm system, with Magnetic Test Switch. Limited to 100 mAmp max. Mini version only 5 year warranty

Ultra Safety Systems Bilge Switch Ultimate JR 24/32 VOLT ULTRA PUMPSWITCH JR Automatic bilge pump switch. 6 1/4 inch high and 2 1/2 inch diameter (1 1/4 inch ON/OFF differential). 24/32 Volts at 10 Amps (30 Amp relay) 5 year warranty

Ultra Safety Systems Ultimate Mini Bilge Switch 24/32V ULTRA PUMPSWITCH MINI 4 inch high, 1 3/4 inch diameter, 3/4 inch ON/OFF differential. 24/32 Volts. 40 Amp relay 20 Amp continuous pump load With Magnetic Test Switch. 5 year warranty

Ultra Safety Systems Teflon Lube Syringe THE ORIGINAL TEF-GEL FOOD GRADE 20cc Syringe Contain no Silica NSN 8030014504009  

Ultra Safety Systems Inc

WeatherDeck® 12V DC Waterproof Switch Panel - 2 Position Integrated switch guards reduce the risk of accidental switching Panels can be mounted in four different orientations Panel front rated IP67 when properly mounted with watertight mounting gasket UV stabilized weather-resistant faceplate snaps on and off providing access to components and concealing mouting screws Weatherproof: Waterproof Positions: 2 Nominal Voltage: 12V DC/24V DC Circuit Protection: None Maximum Amperage: 15A @ 12V DC (per circuit) Material: Reinforced Polycarbonate Height: 2.60"(66.04 mm) Width : 3.88"(98.55 mm) Depth: 2.50"(63.5 mm) Weight: 0.52lb (0.24 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12" x 12" Standard Trim Tab Kit w/LED Integrated Switch Kit - 12V  Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts. Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches. Kit includes:  Self-contained sealed keypad Control box 36" Pigtail Specifications: Suggested Boat Length: 17' to 30' Length of Tab: 12" Width of Tab: 12" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: LED Indicator Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Oberdorfer 405M-04-M75 Pump 3/4Hp 1800Rpm 12V   FEATURES Pump Body: Bronze Ports: 1" NPT and 1 1/2" Hose Flow: 24 GPM at 20 feet of head Impeller: Neoprene Standard, Buna Optional Shaft Seal: Mechanical Shaft: Stainless Steel Motor / Drive: Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.     APPLICATIONS / CHARACTERISTICS RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.   Oberdorfer Flexible Impeller Utility Pump, 1"NPT Ports, Neoprene Impeller, 3/4HP 12V TEFC Motor  

9" x 12" Standard Trim Tab Kit w/Standard Integrated Switch Kit- 12V  Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts. Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches. Kit includes:  Self-contained sealed keypad Control box 36" Pigtail Specifications: Suggested Boat Length: 16' to 25' Length of Tab: 9" Width of Tab: 12" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Standard Tactile Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.