Tuthill 10504100 Vented Pipe Plug

Tuthill P401-2 Pipe Plug

Oberdorfer 6052 Pipe Plug Socket  

Oberdorfer 7043 Pipe Plug 1/4"  

Oberdorfer 7443 Pipe Plug 1/2"  

Oberdorfer 7934 Pipe Plug  

Oberdorfer 7189 Pipe Plug  

Sherwood 339 PIPE PLUG 1/8"    

PleasureCraft Marine RS3554 Pipe Plug Hex Head Brass 1/8

MP Pump 21267 Pipe Plug 1/4 Npt 316Ss

Groco 1827-Hb 1/8-27 Hex Brz Pipe Plug  

Jabsco 92650-0070 1/4" Pipe Plug  

BERKELEY 171P1180, PIPE PLUG

Tuthill 0LEV-C-A-7 Pump Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.   Features : Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI. Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.

Tuthill 1LEV-C-7 Pump 3.2 Gpm Cast Iron Rotary Gear Pump Pump End Only Tuthill L Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view) Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU