Bilge Pump - 800/1100 GPH - Non-Automatic The TRAC Outdoor 69301 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.  The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  It is ignition protected, can run dry without damage and has a low power draw.  *Float switch not included  Features: Cartridge style pump head Pump body accepts both 3/4” and 1-1/8” screw-on outlets.  Each outlet has an O-ring for easy maneuverability without stripping Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Discharge Outlet - 3/4" and 1-1/8" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 800/1100 GPH - Automatic  The TRAC 69311 Automatic Bilge Pump is a submersible 600 GPH pump.  This automatic, self-priming bilge pump is ideal for all watercraft.  It is ignition protected, has a low power draw and can run dry without damage.  Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.   This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.  Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami.   Features: Cartridge style pump head Pump body accepts both 3/4” and 1-1/8” screw-on outlets.  Each outlet has an O-ring for easy maneuverability without stripping Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Discharge Outlet - 3/4" and 1-1/8" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 600 GPH - Non-Automatic The TRAC Outdoor 69300 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.  The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  It is ignition protected, can run dry without damage and has a low power draw.  *Float switch not included  Features: Cartridge style pump head Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate - 600 GPH Discharge Outlet - 3/4" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 600 GPH - Automatic  The TRAC 69310 Automatic Bilge Pump is a submersible 600 GPH pump.  This automatic, self-priming bilge pump is ideal for all watercraft.  It is ignition protected, has a low power draw and can run dry without damage.  Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.   This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.  Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps.  Screw mounting holes match Rule and Attwood Tsunami.   Features: Cartridge style pump head Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Automatic Flow Rate - 600 GPH Discharge Outlet - 3/4" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Cartridge Bilge Pump Low 1100GPH - 12V Submersible low bilge pump 12V with pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install. Features: Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation  Replaceable cartridge motor  Easy maintenance and low power consumption Specifications: Fixed 29 mm (1,15″) straight discharge port Amperage: 4A  Fuse Size: 5A  Length: For pleasure boats from 8m (25 Ft) to 10m (30 Ft)

Sahara MK2 S800 Bilge Pump 800 GPH - 12V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.

Sahara MK2 S800 Bilge Pump 800 GPH - 24V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.

Rule 2000 Non-Automatic 12v, UL listed w/ 6' wire leads Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 4 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 24V Fuse Size: 2 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet

Rule 3700 Non-Automatic 32v Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Rule 1500 Non-Automatic 24v High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

1800 GPH Non-Automatic 110V Pump Part #: A53D A high performance 110 Volt utility pump that is designed to remove water from hard to reach spaces anywhere water accumulates. The pump's versatile design makes it the perfect solution to remove water from basements, garages, stairwells, utility rooms, backyards, sumps, pools, pool covers, boats, and for other utility applications. It features an improved unibody housing that is corrosion proof and reduces potential leak paths. The pump features a powerful 1800 GPH motor that only consumes 100 watts, while delivering up to 1800 gallons per hour. Applications: The Rule line of 1800 GPH utility pumps are ideally suited for removing unwanted water from basements, garages, backyards and boats and has a robust motor, a sturdy housing and a rugged impeller for years of pumping power. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rule 2000 Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 500 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 3 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet