|
Shields clear polyester reinforced red tracer PVC tubing has a clear, heavy wall FDA formula vinyl with polyester braid reinforcement. Primarily used for pressurized water system supply (hot or cold), wash down pump connections, head intake and drain line for sink, shower and icebox.
|
89.99 |
|
|
Shields clear polyester reinforced red tracer PVC tubing has a clear, heavy wall FDA formula vinyl with polyester braid reinforcement. Primarily used for pressurized water system supply (hot or cold), wash down pump connections, head intake and drain line for sink, shower and icebox.
|
124.00 |
|
|
For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.
|
16.99 |
|
|
For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.
|
21.99 |
|
|
Flame retardant polypropylene wiring conduit, black with blue stripe. Split for easy access to harness. Meets ABYC and UL 94V2 standards. 50' length.
|
48.29 |
|
|
1-1/2" x 50' Box VAC XHD Sanitation Hose - Hard PVC Helix - White
Trident Ply Extra heavy-duty sanitation hose of smooth white vinyl. Specially compounded to provide excellent resistance to odor permeation and (FDA) potable water fill. Also for the critical bilge, drain scuppers, live wells, etc. Self-draining installations are recommended for the longest odor-free service.
Features:
A hard PVC helix gives good flexibility and bend radius
No cuffs are required
Application:
Specially compounded to provide resistance to odor permeation and (FDA) potable water fill
Also for critical bilge, drain scupper, live well, etc
Specifications:
Tube & Cover: Hard PVC helix
Color: White
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Boxed: 50ft. / (15.2m)
Inner Diameter: (inch) 1-1/2" / (mm) 38.1
Outer Diameter: (inch) 1.788" / (mm) 45.4
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 22 / (Kg/m) 0.76
Bend Radius: (inch) 4" / (mm) 102
*Don't use with alcohol, anti-freeze, petrochemicals, or solvents
*Burst Pressure is 4 x Working Pressure
|
180.71 |
|
|
1-1/2" x 50' Coil - Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1-1/2" / (mm) 38
Outer Diameter: (inch) 1.97 / (mm) .05
Working Pressure: (Psi) 60 / (bar) 4.1
Bend Radius: (inch) 4.0" / (mm) 102
Weight: (Lb./50ft.) 45 / (Kg/m) .518
*Burst Pressure is 4 x Working Pressure
|
517.72 |
|
|
Sternflex 2" rigging hose used to cover harness and bracket mounted hoses on outboard engines. Polyethylene co-polymer wall with an integral polyethylene helix. Resistant to abrasion, crushing and UV. 3" bend radius.
|
4.79 |
|
|
4 Blade stainless interchangeable hub propeller for 115 and up horsepower engines with thru hub exhaust, 4-3/4" gear case. Category E prop. Requires RBX™ hub kit for installation.
|
477.99 |
|
|
1-1/2" x 50' Coil - Premium Marine Sanitation Hose - White with Green Stripe
Trident Premium Sanitation Hose resistant to odor permeation. Simply the BEST solution for marine environments, built with EPDM rubber to ensure the overall performance and resistance to odor permeation that you would expect in a sanitation hose.
Features:
Resistance to Odor Permeation and winterizing with antifreeze
With wire helix between 2 ply reinforcement this hose has excellent bend radius, flexibility, and fitting acceptance and retention
This makes for easy installations with no heatgun or lubricant necessary
10 Year Warranty
Application:
Premium Sanitation Hose for all head & holding tank connections
NOT for potable water
Construction:
Tube & Cover: EDPM/SBR Rubber
Color: White with Green Stripe
Reinforcement: Polyester reinforcement + spring steel wire helix
Temperature Range: -20F-220°F (-29°C-104°C)
Length: 50’ (15m)
Specifications:
Inner Diameter: (inch) 1-1/2" / (mm) 38.1
Outer Diameter: (inch) 2 / (mm) 50.8
Working Pressure: (Psi) 60 / (bar) 4.1
Weight: (Lb./50ft.) 44 / (Kg/m) 19.9
Bend Radius: (inch) 3" / (mm) 76.2
*Burst Pressure is 4 x Working Pressure
|
603.43 |
|
|
1/2" x 50' Boxed Reinforced PVC (FDA) Cold Water Feed Line Hose - Drinking Water Safe - Translucent Blue
Trident 165 Series Blue - polyester reinforced PVC hose for "Cold Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures as low as -18.4ºF (- 28ºC) and can handle pressures up to 250 psi (varies based on i.d size).
Features:
The Blue cover allows for easy identification of "Cold Water" lines on your boat
Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility
This hose is safe for use with drinking water
Application:
Perfect for cold pressurized applications, water feed, drains, and vent lines
Construction:
Tube & Cover: Clear FDA tube
Color: Blue Transparent
Reinforcement: Polyester
Temperature Range: -18°F to 149°F (-28°C to 65°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1/2" / (mm) 12.7
Outer Diameter: (inch) .777 / (mm) 19.6
Working Pressure: (PSI Vac In./Hg) 250 / (bar) 17
Bend Radius: (inch) 0.98" / (mm) 25
*Burst Pressure is 4 x Working Pressure
|
50.63 |
|
|
1/2" x 50' Boxed Reinforced PVC (FDA) Hot Water Feed Line Hose - Drinking Water Safe - Translucent Red
Trident 166 Series Red - polyester reinforced PVC hose for "Hot Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures of up to 149ºF (65ºC) and can handle pressures to a maximum of 250 psi (varies based on i.d size).
Features:
The Red cover allows for easy identification of "Hot Water" lines on your boat
Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility
This hose is safe for use with drinking water
Application:
Perfect for hot, pressurized applications, hot water feed, drains, and vent lines
Construction:
Tube & Cover: Clear FDA tube
Color: Red Transparent
Reinforcement: Polyester
Temperature Range: -18°F to 149°F (-28°C to 65°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1/2" / (mm) 12.7
Outer Diameter: (inch) .777 / (mm) 19.6
Working Pressure: (PSI Vac In./Hg) 250 / (bar) 17
Bend Radius: (inch) 0.98" / (mm) 25
*Burst Pressure is 4 x Working Pressure
|
50.63 |
|
|
3 Blade aluminum propeller for Honda 75-130 horsepower engines and Nissan/Tohatsu 60-90 horsepower engines. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.
|
139.99 |
|
|
3 Blade aluminum propeller for Honda 75-130 horsepower engines and Nissan/Tohatsu 60-90 horsepower engines. Both with 15 tooth spline and thru hub exhaust. 4-1/4" gearcase.
|
139.99 |
|
|
3 Blade stainless propeller for 60 -140 horsepower engines with 13 tooth spline and thru hub exhaust. 4-1/4" Gear Case.
|
385.99 |
|