|
Black 7" 14 ga. wire loop with black plastic twist-lock fuse holder and 20 amp fuse. Display packaged. WHILE QUANTITIES LAST.
|
9.99 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Black wire loop with plastic twist-lock case. 8" 14 gauge wire loop. Includes 20 amp SFE fuse. Display packaged.
|
8.99 |
|
|
ATO plastic fuse holder for fuses up to 20 amps. 8" wire loop, 14 ga.
|
9.89 |
|
|
MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution.
Features:
Carded blister packaging for simple retail display
Compatible with MIDI bolt-down fuses up to 200A (sold separately)
The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block
Slots molded into the base enable secure tie-wrap mounting
Zinc-plated steel M5 studs and hex nuts
Bolt-down fuse holder base features M4 mounting holes
UL 94 V-0 flammability rating
Applications:
Battery and alternator Connections
*Fuses not included
|
8.16 |
|
|
MEGA Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 500 Amps
The MEGA Flex Series 32V Bolt-Down Fuse Holder makes it simple to install high-amp fusing thanks to its flexible cover. The UL 94 V-0 rated cover features 6 different positions for cable entry, plus its flexibility accommodates large wire sizes and ring terminal stack up. Designed for MEGA fuses up to 500 amps, this bolt-down fuse holder also has a dovetail feature on the sides that allows you to connect multiple MEGA Flex Series fuse holders to create a fused high-power distribution block. This fuse holder (02981028-BP) includes stainless steel M8 studs, hex nuts, and split washers.
Features:
Blister packaging promotes the easy retail display
Compatible with MEGA high-current bolt-down fuses up to 500 amps
Black or red flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetailing feature lets you connect multiple MEGA Flex Series fuse holders together to create a fused high-power distribution block (busbars for multi-fuse applications are sold separately)
Slots molded into the base enable secure tie-wrap mounting
Bolt-down fuse holder base features an M6 mounting hole and an M6 slot measuring 6mm long
Includes stainless steel M8 studs, hex nuts, and split washers
The flexible cover has a UL 94 V-0 flammability rating
Applications:
Battery and Alternator Connections
High-Current Circuit Protection
Electric Construction Equipment
*Fuses not included
|
12.43 |
|
|
MIDI 498 Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to interlocking pins on its sides, the MIDI 498 Series 32V Bolt-Down High-Current Fuse Holder can be used as a single automotive fuse holder or combined with additional fuse holders to create a multi-fuse block. Compatible with MIDI bolt-down fuses (sold separately) up to 200 amps, the high-amp fuse holder comes with a protective thermoplastic cover that can be tethered to the base. This model of the MIDI 498 Series fuse holder (04980903-BP) includes a base with mounting tabs and M6 holes and a protective cover with cable openings at the ends. Split washers and hex nuts are included to install a fuse on the M5 threaded studs simply.
Features:
Blister packaging promotes the easy retail display
Base style 2 with mounting brackets and M6 holes is designed for outboard mounting
M5 threaded studs, split washers, and hex nuts for simple fuse installation
Protective cover openings at the ends accommodate heavy-duty cables
Applications:
High-Current Circuit Protection
*Fuses not included
|
6.65 |
|
|
Contour Switch Panel - Waterproof 6 Way w/Fuse Holder
CSP6-F includes 6 switches and 3 inline fuse holders with fuses behind the panel.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.99 |
|
|
ProSportHD 20 Gen 4 - 20 Amp - 2 Bank Battery Charger
ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.
ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.
Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.
Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.
Features:
ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
Lightweight Design Up to 40% lighter compared to an epoxy filled charger
Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
Easy Installation and Operation Pre-wired with 6’ AC and DC cables
Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
3 Year Warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
263.99 |
|
|
ProSportHD 20 Plus Gen 4 - 20 Amp - 3 Bank Battery Charger
ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.
ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.
Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.
Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.
Features:
ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
Lightweight Design Up to 40% lighter compared to an epoxy filled charger
Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
Easy Installation and Operation Pre-wired with 6’ AC and DC cables
Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
3 Year Warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
275.99 |
|
|
ProSportHD 20 Global Gen 4 - 20 Amp - 2 Bank Battery Charger
*C13 Adapter Plug Required*
ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.
ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.
Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.
Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.
Features:
ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
Lightweight Design Up to 40% lighter compared to an epoxy filled charger
Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
Easy Installation and Operation Pre-wired with 6’ AC and DC cables
Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
3 Year Warranty
Specifications:
DC Voltage Systems: 12/24v
Amps: 20
No. of Batteries: 2
AC & DC Cable Length: 6'/6'
Size: 7.9" x 13.6" x 2.9"
Weight: 8.2 lbs
AC In: 100-240v AC 50/60Hz
AC Plug: IEC C14
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
348.47 |
|
|
ProSportHD 20 Plus Global Gen 4 - 20 Amp - 3-Bank Battery Charger
*C13 Adapter Plug Required*
ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.
ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.
Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.
Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.
Features:
ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
Lightweight Design Up to 40% lighter compared to an epoxy filled charger
Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
Easy Installation and Operation Pre-wired with 6’ AC and DC cables
Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
3 Year Warranty
Specifications:
DC Voltage Systems: 12/24/36v
Amps: 20
No. of Batteries: 3
AC & DC Cable Length: 6'/6'/6'
Size: 7.9" x 13.6" x 2.9"
Weight: 8.8 lbs
AC In: 100-240v AC 50/60Hz
AC Plug: IEC C14
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
347.75 |
|
|
Rule-A-Matic® Plus Float Switch
with fuse holder
Sleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover, which protects against debris and jamming. 14 gauge highly abrasive resistant marine grade wire, and a built-in test feature. Designed for pumps drawing up to 20 Amps Model 40FA now includes a 2 year warranty.
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
51.53 |
|
|
Cockpit Marine 52mm (2-1/16") Fuel Level Gauge - Black Dial/Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
Features:
E - 1/2 - F range
Works with all 240-33Ohm marine fuel senders
For 12V electrical systems
Connection: M4 Stud
Dial Scale: Single
Input Type: Analog
Mounting Hardware: Included
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.43 |
|
|
Flat fuse holder comes with 12 ga. wire and a 30 amp ATO fuse.
|
11.79 |
|