|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
Shields clear polyester reinforced red tracer PVC tubing has a clear, heavy wall FDA formula vinyl with polyester braid reinforcement. Primarily used for pressurized water system supply (hot or cold), wash down pump connections, head intake and drain line for sink, shower and icebox.
|
89.99 |
|
|
Flame retardant polypropylene wiring conduit, black with blue stripe. Split for easy access to harness. Meets ABYC and UL 94V2 standards. 50' length.
|
48.29 |
|
|
Double Braided Nylon Dock Line - 1/2" x 50' - Black
Features:
Double Braided Nylon Dock Lines
100% premium double braided nylon
Professionally spliced soft eye at one end
Yacht whipped at the bitter end and splice point
|
31.54 |
|
|
1/2" x 50' Boxed Reinforced PVC (FDA) Cold Water Feed Line Hose - Drinking Water Safe - Translucent Blue
Trident 165 Series Blue - polyester reinforced PVC hose for "Cold Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures as low as -18.4ºF (- 28ºC) and can handle pressures up to 250 psi (varies based on i.d size).
Features:
The Blue cover allows for easy identification of "Cold Water" lines on your boat
Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility
This hose is safe for use with drinking water
Application:
Perfect for cold pressurized applications, water feed, drains, and vent lines
Construction:
Tube & Cover: Clear FDA tube
Color: Blue Transparent
Reinforcement: Polyester
Temperature Range: -18°F to 149°F (-28°C to 65°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1/2" / (mm) 12.7
Outer Diameter: (inch) .777 / (mm) 19.6
Working Pressure: (PSI Vac In./Hg) 250 / (bar) 17
Bend Radius: (inch) 0.98" / (mm) 25
*Burst Pressure is 4 x Working Pressure
|
50.63 |
|
|
1/2" x 50' Boxed Reinforced PVC (FDA) Hot Water Feed Line Hose - Drinking Water Safe - Translucent Red
Trident 166 Series Red - polyester reinforced PVC hose for "Hot Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures of up to 149ºF (65ºC) and can handle pressures to a maximum of 250 psi (varies based on i.d size).
Features:
The Red cover allows for easy identification of "Hot Water" lines on your boat
Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility
This hose is safe for use with drinking water
Application:
Perfect for hot, pressurized applications, hot water feed, drains, and vent lines
Construction:
Tube & Cover: Clear FDA tube
Color: Red Transparent
Reinforcement: Polyester
Temperature Range: -18°F to 149°F (-28°C to 65°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1/2" / (mm) 12.7
Outer Diameter: (inch) .777 / (mm) 19.6
Working Pressure: (PSI Vac In./Hg) 250 / (bar) 17
Bend Radius: (inch) 0.98" / (mm) 25
*Burst Pressure is 4 x Working Pressure
|
50.63 |
|
|
1-1/2" x 50' Box VAC XHD Sanitation Hose - Hard PVC Helix - White
Trident Ply Extra heavy-duty sanitation hose of smooth white vinyl. Specially compounded to provide excellent resistance to odor permeation and (FDA) potable water fill. Also for the critical bilge, drain scuppers, live wells, etc. Self-draining installations are recommended for the longest odor-free service.
Features:
A hard PVC helix gives good flexibility and bend radius
No cuffs are required
Application:
Specially compounded to provide resistance to odor permeation and (FDA) potable water fill
Also for critical bilge, drain scupper, live well, etc
Specifications:
Tube & Cover: Hard PVC helix
Color: White
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Boxed: 50ft. / (15.2m)
Inner Diameter: (inch) 1-1/2" / (mm) 38.1
Outer Diameter: (inch) 1.788" / (mm) 45.4
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 22 / (Kg/m) 0.76
Bend Radius: (inch) 4" / (mm) 102
*Don't use with alcohol, anti-freeze, petrochemicals, or solvents
*Burst Pressure is 4 x Working Pressure
|
180.71 |
|
|
1-1/2" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black
Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.
Features:
149 series of hoses is extra flexible
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Hard PVC helix
Color: Black
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Boxed: 50ft. / (15.2m)
Inner Diameter: (inch) 1-1/2" / (mm) 38.1
Outer Diameter: (inch) 1.792" / (mm) 45.5
Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93
Weight: (Lb./ 50 ft.) 22 / (Kg/m) 9.98
Bend Radius: (inch) 4" / (mm) 101.6
*Burst Pressure is 4 x Working Pressure
|
195.35 |
|
|
1-1/2" x 50' Coil - Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1-1/2" / (mm) 38
Outer Diameter: (inch) 1.97 / (mm) .05
Working Pressure: (Psi) 60 / (bar) 4.1
Bend Radius: (inch) 4.0" / (mm) 102
Weight: (Lb./50ft.) 45 / (Kg/m) .518
*Burst Pressure is 4 x Working Pressure
|
517.72 |
|
|
1-1/2" x 50' Coil - Premium Marine Sanitation Hose - White with Green Stripe
Trident Premium Sanitation Hose resistant to odor permeation. Simply the BEST solution for marine environments, built with EPDM rubber to ensure the overall performance and resistance to odor permeation that you would expect in a sanitation hose.
Features:
Resistance to Odor Permeation and winterizing with antifreeze
With wire helix between 2 ply reinforcement this hose has excellent bend radius, flexibility, and fitting acceptance and retention
This makes for easy installations with no heatgun or lubricant necessary
10 Year Warranty
Application:
Premium Sanitation Hose for all head & holding tank connections
NOT for potable water
Construction:
Tube & Cover: EDPM/SBR Rubber
Color: White with Green Stripe
Reinforcement: Polyester reinforcement + spring steel wire helix
Temperature Range: -20F-220°F (-29°C-104°C)
Length: 50’ (15m)
Specifications:
Inner Diameter: (inch) 1-1/2" / (mm) 38.1
Outer Diameter: (inch) 2 / (mm) 50.8
Working Pressure: (Psi) 60 / (bar) 4.1
Weight: (Lb./50ft.) 44 / (Kg/m) 19.9
Bend Radius: (inch) 3" / (mm) 76.2
*Burst Pressure is 4 x Working Pressure
|
603.43 |
|
|
1-1/2" x 50' Coil Type A2 Fuel Fill Hose
Trident 1-1/2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends).
Features:
This hose is built with the best fuel, fire, and age-resistant formulation
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also, provides excellent bend-ability
Application:
Marine Fuel Hose for fill and vent plus diesel distribution
Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube & Cover: NBR / Neoprene
Reinforcement: High tenacity polyester 2 spiral, spring steel helix
Temperature Range: -20°F to 212°F (-20ºC to 100ºC)
Length: 50 ft. (15.24 m) Coil
Specifications:
Inner Diameter: (inch) 1/2" / (mm) 38
Outer Diameter: (inch) 2 / (mm) 51
Wall: (inch) 0.25 / (mm) 6.4
Working Pressure: (psi) 60 / (mpa) 0.41
Bend Radius: (inch) 5.5" / (mm) 140
*The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved
|
507.43 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Sternflex 2" rigging hose used to cover harness and bracket mounted hoses on outboard engines. Polyethylene co-polymer wall with an integral polyethylene helix. Resistant to abrasion, crushing and UV. 3" bend radius.
|
4.79 |
|
|
Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.
|
109.00 |
|
|
Ampco Pumps AC114MD14T-S Peo 1 1/2 X 1 1/2 Kit
|
1668.60 |
|