For filling lower units on outboards and stern drives. Tapered/Unthreaded hose end. Designed for use with 18-9600-5, 18-9620-5 and 18-9650-5.

High quality synthetic gear lube, 75W90, class GL-5. Manufactured to Volvo specifications. Replaces Volvo # 1141679. 55 GALLON DRUMS SHIPPED VIA TRUCK LINE ONLY FROM FACTORY, FREIGHT NOT ALLOWED. ADDITIONAL CHARGE APPLIES FOR LIFT GATE.

Recommended for all general marine applications requiring a GL-5 class lubricant. 80W90. Ideal for replacing all old hypoid 90 applications needs. Formulated for use in freshwater or saltwater conditions and all standard marine applications under 75HP. Reduces friction and protects gears, bearings and other Gearcase components. Lower Unit Kit contains: two(2) 10 oz. tubes of Lower Unit Gear Lube and one(1) Flush & fill tool for small gearcases.

Meets the following manufactures specifications: Volvo VDS-3; Cummins CES20078, CES20077, CES20076; Detroit Diesel DDC93D214; CAT ECF-2, ECF-1; Global DHD-1. Increased detergency fights soot and carbon deposits. Certified to API CL-4+ Rating. Meets highest standards for diesel oil. Sold in case quantities only. WHILE QUANTITIES LAST.

Synthetic marine formulation reduces operating friction for increased performance and protection of gears, bearings and other Gearcase components. Recommended for use in high performance and high load operating conditions in both outboard and I/O lower unit gear cases, 75HP and above, where a GL-5 class lubricant is required. 80W90

March TE-5.5C-MD Mag-Drive Centrifugal Pump single phase with 115/230V Motor   Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.   March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.   Unit System 60Hz 50Hz Max Flow 30 GPM 102 LPM Max Head 41 FT 9 M Power .33 HP .248 KW Electrical 1PH 115/230V                3PH 230/460V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)  

Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.    March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower air cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.      Unit System 60Hz 50Hz Max Flow 30 GPM 102 LPM Max Head 41 FT 9 M Power .33 HP .248 KW Electrical 1PH 115/230V                   3PH 230/460V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)

Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

Sierra TC-W3 is a high performance lubricant that has been designed to meet and exceed all (Domestic & Import) engine manufacturers warranties. Exceeds JASO, ISO, API and NMMA for advanced generation 2 cycle lubricants. Priced each, sold in case quantities only.

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

High performance lubricant designed to meet and exceed all Domestic and Import engine manufacturers' warranties. Exceeds JASO, ISO, API and NMMA for advanced generation 2 cycle lubricants. Protects engine against heat, friction and rust. Formulated specifically for BRP E-Tec and most other high performance 2-stroke marine engines. Priced each, sold in case quantities only.

High performance lubricant designed to meet and exceed all Domestic and Import engine manufacturers' warranties. Exceeds JASO, ISO, API and NMMA for advanced generation 2 cycle lubricants. DROP SHIPPED DIRECT FROM FACTORY VIA LTL TRUCK LINE ONLY. FREIGHT NOT ALLOWED. PRICED PER COMPLETE PALLET OR DRUM. ADDITIONAL CHARGE APPLIES FOR LIFT GATE.

High performance lubricant designed to meet and exceed all Domestic and Import engine manufacturers' warranties. Exceeds JASO, ISO, API and NMMA for advanced generation 2 cycle lubricants. Protects engine against heat, friction and rust. Formulated specifically for BRP E-Tec and most other high performance 2-stroke marine engines. DROP SHIPPED DIRECT FROM FACTORY VIA LTL TRUCK LINE ONLY. FREIGHT NOT ALLOWED. PRICED PER PALLET OR DRUM. ADDITIONAL CHARGE APPLIES FOR LIFT GATE.

Includes adapters for all major outboard engine manufacturers. Aluminum fittings. Universal gear lube pump for use with standard or wide mouth bottles. Replaces: Mercury 8M0072133, 883704Q03. Suzuki 990C0-99001. Yamaha ACC-PUMP0-00-QT, ACC-PUMP0-02-GL.

Premium quality motor oil formulated to meet or exceed warranty requirements for 2-cycle outboard engines. Protects engine against heat, friction and rust. Formulated specifically for Mercury Optimax, Yamaha HPDI, BRP Ficht, DI and other high performance injection type engines. Exceeds JASO, ISO, API and NMMA for advanced generation 2 cycle lubricants. Priced each, sold in case quantities only.