|
Sherwood- Engine Cooling Pump
More Info: G21 G-21, Pleasurecraft 302 351 RA057007
FEATURES
Pump Body:
Bronze
Ports:
1" Hose
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Mechanical
Pulley:
6"
Drive:
Bracket Mount Pulley Drive.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
|
757.56 |
|
|
Jabsco Flexible Impeller Pedestal Pump
FEATURES
Pump Body:
Brass, High Profile Verson
Port Size:
3/8" BSP or
3/8" NPT
Flow:
Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon/Ceramic Mechanical
Shaft:
Stainless Steel 12mm
APPLICATIONS / CHARACTERISTICS
Marine: Engine Cooling, Bilge Pumping, Water Circulation.
Industrial: Circulating and Transferring, Velocity Mixing.
Farming: Pumping Water for Stock, Liquid Ballast Transfer.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 1.5m (4.9ft).
Jabsco Flexible Impeller Pedestal Pump 3/8" NPT High Profile
|
384.05 |
|
|
JMP Marine MCSSET0020 Mechanical Seal
Services Pumps: JPR-WB08IP, JPR-YM08IH, JPR-YM08IH2
MCSSET0020 JMP Marine Engine Cooling Raw Water Mechanical Seal Set
Services JMP Marine Engine Cooling Seawater Pumps:
JPR-WB08IP Westerbeke Replacement Pump
JPR-YM08IH Yanmar Replacement Pump - 2GMF, 3GMF, 2YM, 3YM
JPR-YM08IH2 Yanmar Replacement Pump - 2GM, 3GM
|
32.52 |
|
|
Jabsco Flexible Impeller Pedestal Pump Brz Ped
FEATURES
Pump Body:
Brass, Low Profile Verson
Port Size:
3/8" BSP or
3/8" NPT
Flow:
Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon/Ceramic Mechanical
Shaft:
Stainless Steel 12mm
APPLICATIONS / CHARACTERISTICS
Marine: Engine Cooling, Bilge Pumping, Water Circulation.
Industrial: Circulating and Transferring, Velocity Mixing.
Farming: Pumping Water for Stock, Liquid Ballast Transfer.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 1.5m (4.9ft).
Jabsco Flexible Impeller Pedestal Pump 3/8" British Standard Pipe Threads, Low Profile
|
383.21 |
|
|
Jabsco Pump Brz Ped 020 Mech
FEATURES
Pump Body:
Brass, High Profile Verson
Port Size:
3/8" BSP or
3/8" NPT
Flow:
Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon/Ceramic Mechanical
Shaft:
Stainless Steel 12mm
APPLICATIONS / CHARACTERISTICS
Marine: Engine Cooling, Bilge Pumping, Water Circulation.
Industrial: Circulating and Transferring, Velocity Mixing.
Farming: Pumping Water for Stock, Liquid Ballast Transfer.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 1.5m (4.9ft).
Jabsco Flexible Impeller Pedestal Pump 3/8" British Standard Pipe Threads, High Profile
|
395.92 |
|
|
Sherwood P1014 PUMP
Pump Body: Bronze
Ports: 1 1/4" Hose
Cam: Full
Impeller:Neoprene
Shaft Seal: Mechanical
Drive: Bracket Mount Pulley Drive
Replaced Sherwood P101
|
791.05 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Sherwood P1016 Engine Cooling Pump
The Sherwood P1016 flexible impeller engine cooling pump replaces the Sherwood pump P1016-01
Applications for the Sherwood P1016 pump include: Cummins QSD 2.0 & 2.8 engines, replaces Cummins 854179001, Mercury MerCruiser 879312023 and 854179001 pumps.
This is a genuine Sherwood P1016 flange mounted boat engine cooling pump, using raw water intake (river water or sea water) to cool the engine. The Sherwood P1016 is supplied complete with a 12 vane through key drive flexible neoprene impeller.
The raw water engine cooling pump is the heart of the marine engine, supplying a continuous flow of raw water to maintain temperatures consistent with the demanding engine performance. Over the years, Sherwood raw water pumps have developed a reputation of excellence in quality; and today are chosen for their performance and dependability by the most prestigious marine engine manufacturers.
Sherwood pumps are one of the largest suppliers of flexible rubber impeller cooling pumps for marine engines in the USA. They can be found fitted on some of the most well known engine brands in both pleasure and commercial boats.
To ensure that your boat engine cooling pump performs as required, regular preventative maintenance and inspection should be carried out. The Sherwood engine cooling pump impeller should be replaced every 3 - 12 months depending on application.
|
452.05 |
|
|
Sherwood G-30-2B Engine Cooling Pump All Bronze
FEATURES
Pump Body:
Bronze
Ports:
1" Hose
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Mechanical
Drive:
Bracket Mount Pulley Drive.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
All Bronze version of Sherwood G-30-2.
Sherwood Engine Cooling Pump All Bronze for G30-2B G-30-2B, Chris Craft and Volvo Penta Model 350 16.80-18346
|
818.46 |
|
|
Sherwood P1733X-J Engine Cooling Pump JPR-S7633
JPR-S7633 John Deere Replacement Engine Cooling Seawater Pump
See: https://www.clrmarine.com/m4/JMPMA%20JPR-S7633--jmp-marine-jpr-s7633-john-deere-re515657-dz114697-engine-cooling-pump.html
|
871.01 |
|
|
Sherwood G-1012-J Engine Cooling Pump JPR-ON7312
Replaces Cummins Onan A032Y747, 132-0464, Sherwood G1012, G1009.
Engine Models MDKDS, MDKDT, MDKDU, MDKBT, MDKBU, QD 22.5/27/29 kW Generator
Uses JMP Flexible Impeller p/n: 7300-01K
Port Type: Hose
Drive Type: Spline Drive
Pump Weight (approx): 7.75 LBS (3.52 KG)
Replaces Cummins Onan Pump p/n(s): A032Y747, 132-0464
Replaces Sherwood Pump p/n(s): G1012, G1009
For Engine Model(s) MDKDS/T/V, MDKBT/BU: MDKDS, MDKDT, MDKDU, MDKBT, MDKBU, QD 22.5/27/29 kW Generator
Parts Internally Compatible to Genuine: NO (Changes made for Better Quality & Performance)
|
453.66 |
|
|
Sherwood G-2903X-J Engine Cooling Pump JPR-C1100
Replaces Cummins 3349392, 5260393, 4929178, Sherwood G2903X, G2903-01, G2903-02.
Engine Model QSM11
Uses JMP Impeller p/n: 8359-01K
Port Type: Flange 2"
Replaces Genuine Cummins Pump p/n(s): 3349392, 4929178, 5260393
Replaces Sherwood Pump p/n(s): G2903X, G2903-01, G2903-02
For Engine Model(s): QSM11
Pump Weight (approx): 35.0 LBS (15.91 KG)
Parts Internally Compatible to Genuine: YES
100% Plug & Play Replacement
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
O-Ring End Cover Packing
Heavy Duty Material for Cam Liner vs Sherwood's Plastic Cam
High Performance Impeller
High Volume Flow Capacity
Fast Flow Capacity
|
1402.33 |
|
|
Sherwood- Engine Cooling Pump
More Info: F85 F-85, Westerbeke Pilot 10-20 16423, The F-85 pump is no longer available directly from Sherwood so we use a G-65 pump and two bushings to reduce the port size to 1/2".
FEATURES
Pump Body:
Bronze
Ports:
1/2" NPT, (Bushed down from 3/4")
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Lip Type
Drive:
Flange Mounted to Engine.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
|
921.53 |
|
|
Sherwood- Engine Cooling Pump
More Info: G11 G-11, Kilo Pac Kilopac
FEATURES
Pump Body:
Bronze
Ports:
1/2" NPT
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Mechanical
Drive:
Bracket Mount Pulley Drive.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump
|
664.89 |
|
|
Sherwood- Engine Cooling Pump
More Info: G151 G-151, Mercruiser 7.3 Diesel, Star Power Inboard
FEATURES
Pump Body:
Bronze
Ports:
1 1/2" Hose
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Mechanical
Pulley:
6 1/2"
Drive:
Bracket Mount Pulley Drive.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump
|
882.25 |
|