|
SnapIt! Marine BRK Pontoon Boat Universal Mounting Bracket
Universal Mounting Bracket. The use of additional mounting brackets allows the option of utilizing the removable accessories at different locations on the boat. Color: White.
|
4.50 |
|
|
SnapIt! Marine M0023 Sailboat Binnacle Mounted Drink Holder
The M0023 Curved Binnacle Drink Holder offers the same functionality as the M005 but is designed to allow additional clearance for the compass on the pedestal. Holds four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard, no other mounting hardware is needed and NO drilling.
Order for specific tube diameter on 9.5" center to center spacing.
For pedestal guards with 12 or 12.5" center to center spacing please see model V0023.
|
75.00 |
|
|
Universal Mounting Bracket Kit
Our unique, three-sided bracket design features three precise angles that take into account the majority of the trailers' diverse tie-down tab designs.The three-sided bracket enables the BoatBuckle G2 to be moved several different ways,making it truly universal.
|
12.88 |
|
|
SnapIt! Marine T008 Sailboat Winch Handle Pocket
End the search for that elusive winch handle! Snap this unique holder to the pedestal guard where it can easily be reached from either side of the boat or get two and mount them on a stanchion near the winch. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.
|
34.00 |
|
|
P4 Color Pack - Fluxgate Compass & Rotary Feedback for Commercial Boats *Deck Mount Bracket Optional
Features:
IST – Intelligent Steering Technology provides superior vessel steering capability
ADAPTIVE steering for sea conditions and varying vessel speeds
AUTO-SETUP – allows auto-drive detection, rudder response time, compass detection and calibration
WORK Mode suitable for Towboats and Workboats
NMEA 2000, ETHERNET, and NMEA 0183 interface
Configurable for Fishing, Offshore Vessels, Workboats, Towboats and Yachts
PRC- Proportional Rate Control feature provides gentle smooth response
Multi-Station capability with security station lock
SUNLIGHT viewable LED backlit 5.7” TFT LCD 640 x 480 display
NAV Mode provide adaptive precise track steering
ALC – Automatic Leeway Compensation for Drift, Tide & Wind
Fully compatible with onboard instruments and steering systems
Z-Drive interface allows 360 ͦAzimuth drive interface using +/- 10 Volts /4-20 milliamps analog signal (optional)
Auto Thrust-assist for Dead-ahead slow or station keeping (optional)
Multi-Language capability: English, Chinese, French, German, Norwegian, Spanish, Italian, Icelandic, and more
Standard Mounting bracket – Flush Mount, Swivel mount bracket is optional
IP67 Waterproof – Control Head, TS4, NF4 and WS4
RoHS & CE compliance for EMI and RFI immunity
Additional Features:
9 level backlit LCD display
Colour head gives you Red Night Vision mode for comfortable viewing in all conditions
Pre-defined parameter sets for full or semi-displacement,planning hulls, stern drives and sailboats
Multiple steering capability for Fast, Slow and Work modes
Simple to use course knob with mechanical detent
Multi-station capability with security station lock
Automatic trim
Adjustable yaw, turn rate and rudder settings
PORT and STBD dodge buttons for collision avoidance
Output for optional analog rudder angle indicator, up to 4 stations
Fully compatible with onboard NMEA instruments and most steering systems
Specifications:
Operating Voltage: 10 to 30 VDC
Power Consumption: Average 0.5 Amps, 3 Amps Peak (Lower consumption capability with low backlight setting) Drive Output: 20 Amps
Network: NMEA 2000
Navigational Interface: NMEA 0183 inputs
NMEA 0183 Output: Heading (10x per sec), Autopilot Status (1x per sec)
Heading Reference: Fluxgate, Magnetic Compass, NMEA Compass or Heading Sensor GNSS compass
Course Resolution: 1°
Course Detection: 0.5°
Control Head: Sunlight viewable high contrast LCD is 5.7” TFT LCD 640 x 480 VGA high resolution display
|
4100.80 |
|
|
P4 Color Pack - Magenetic Compass Sensor & Rotary Feedback for Commercial Boats *Deck Mount Bracket Optional
Features:
IST – Intelligent Steering Technology provides superior vessel steering capability
ADAPTIVE steering for sea conditions and varying vessel speeds
AUTO-SETUP – allows auto-drive detection, rudder response time, compass detection and calibration
WORK Mode suitable for Towboats and Workboats
NMEA 2000, ETHERNET, and NMEA 0183 interface
Configurable for Fishing, Offshore Vessels, Workboats, Towboats and Yachts
PRC- Proportional Rate Control feature provides gentle smooth response
Multi-Station capability with security station lock
SUNLIGHT viewable LED backlit 5.7” TFT LCD 640 x 480 display
NAV Mode provide adaptive precise track steering
ALC – Automatic Leeway Compensation for Drift, Tide & Wind
Fully compatible with onboard instruments and steering systems
Z-Drive interface allows 360 ͦAzimuth drive interface using +/- 10 Volts /4-20 milliamps analog signal (optional)
Auto Thrust-assist for Dead-ahead slow or station keeping (optional)
Multi-Language capability: English, Chinese, French, German, Norwegian, Spanish, Italian, Icelandic, and more
Standard Mounting bracket – Flush Mount, Swivel mount bracket is optional
IP67 Waterproof – Control Head, TS4, NF4 and WS4
RoHS & CE compliance for EMI and RFI immunity
Additional Features:
9 level backlit LCD display
Colour head gives you Red Night Vision mode for comfortable viewing in all conditions
Pre-defined parameter sets for full or semi-displacement,planning hulls, stern drives and sailboats
Multiple steering capability for Fast, Slow and Work modes
Simple to use course knob with mechanical detent
Multi-station capability with security station lock
Automatic trim
Adjustable yaw, turn rate and rudder settings
PORT and STBD dodge buttons for collision avoidance
Output for optional analog rudder angle indicator, up to 4 stations
Fully compatible with onboard NMEA instruments and most steering systems
Specifications:
Operating Voltage: 10 to 30 VDC
Power Consumption: Average 0.5 Amps, 3 Amps Peak (Lower consumption capability with low backlight setting) Drive Output: 20 Amps
Network: NMEA 2000
Navigational Interface: NMEA 0183 inputs
NMEA 0183 Output: Heading (10x per sec), Autopilot Status (1x per sec)
Heading Reference: Fluxgate, Magnetic Compass, NMEA Compass or Heading Sensor GNSS compass
Course Resolution: 1°
Course Detection: 0.5°
Control Head: Sunlight viewable high contrast LCD is 5.7” TFT LCD 640 x 480 VGA high resolution display
|
3924.04 |
|
|
P4 Color Pack - Fluxgate Compass & Rotary Feedback f/Yacht Boats *Deck Mount Bracket Optional
Features:
IST – Intelligent Steering Technology provides superior vessel steering capability
ADAPTIVE steering for sea conditions and varying vessel speeds
AUTO-SETUP – allows auto-drive detection, rudder response time, compass detection and calibration
NMEA 2000, ETHERNET, and NMEA 0183 interface
Configurable for all types of recreational mid-size to large pleasure craft
PRC- Proportional Rate Control feature provides gentle smooth response
Multi-Station capability with security station lock
SUNLIGHT viewable LED backlit 5.7” TFT LCD 640 x 480 display
NAV Mode provide adaptive precise track steering
ALC – Automatic Leeway Compensation for Drift, Tide & Wind
Fully compatible with onboard instruments and steering systems
Z-Drive interface allows 360 ͦAzimuth drive interface using +/- 10 Volts /4-20 milliamps analog signal (optional)
Auto Thrust-assist for Dead-ahead slow or station keeping (optional)
Multi-Language capability: English, Chinese, French, German, Norwegian, Spanish, Italian, Icelandic, and more
Standard Mounting Bracket – Flush Mount, Swivel mount bracket is optional
IP67 Waterproof – Control Head, TS4, NF4 and WS4
RoHS & CE compliance for EMI and RFI immunity
Additional Features:
9 level backlit LCD display
Color head gives you Red Night Vision mode for comfortable viewing in all conditions
Pre-defined parameter sets for full or semi-displacement,planning hulls, stern drives and sailboats
Multiple steering capability for Fast, Slow and Work modes
Simple to use course knob with mechanical detent
Multi-station capability with security station lock
Automatic trim
Adjustable yaw, turn rate and rudder settings
PORT and STBD dodge buttons for collision avoidance
Output for optional analog rudder angle indicator, up to 4 stations
Fully compatible with onboard NMEA instruments and most steering systems
Specifications:
Operating Voltage: 10 to 30 VDC
Power Consumption: Average 0.5 Amps, 3 Amps Peak (Lower consumption capability with low backlight setting) Drive Output: 20 Amps
Network: NMEA 2000
Navigational Interface: NMEA 0183 inputs
NMEA 0183 Output: Heading (10x per sec), Autopilot Status (1x per sec)
Heading Reference: Fluxgate, Magnetic Compass, NMEA Compass or Heading Sensor GNSS compass
Course Resolution: 1°
Course Detection: 0.5°
Control Head: Sunlight viewable high contrast LCD is 5.7” TFT LCD 640 x 480 VGA high resolution display
|
4100.80 |
|
|
P4 Color Pack - Fluxgate Compass & Rotary Feedback f/Yacht Boats *Deck Mount Bracket Optional
Features:
IST – Intelligent Steering Technology provides superior vessel steering capability
ADAPTIVE steering for sea conditions and varying vessel speeds
AUTO-SETUP – allows auto-drive detection, rudder response time, compass detection and calibration
NMEA 2000, ETHERNET, and NMEA 0183 interface
Configurable for all types of recreational mid-size to large pleasure craft
PRC- Proportional Rate Control feature provides gentle smooth response
Multi-Station capability with security station lock
SUNLIGHT viewable LED backlit 5.7” TFT LCD 640 x 480 display
NAV Mode provide adaptive precise track steering
ALC – Automatic Leeway Compensation for Drift, Tide & Wind
Fully compatible with onboard instruments and steering systems
Z-Drive interface allows 360 ͦAzimuth drive interface using +/- 10 Volts /4-20 milliamps analog signal (optional)
Auto Thrust-assist for Dead-ahead slow or station keeping (optional)
Multi-Language capability: English, Chinese, French, German, Norwegian, Spanish, Italian, Icelandic, and more
Standard Mounting Bracket – Flush Mount, Swivel mount bracket is optional
IP67 Waterproof – Control Head, TS4, NF4 and WS4
RoHS & CE compliance for EMI and RFI immunity
Additional Features:
9 level backlit LCD display
Color head gives you Red Night Vision mode for comfortable viewing in all conditions
Pre-defined parameter sets for full or semi-displacement,planning hulls, stern drives and sailboats
Multiple steering capability for Fast, Slow and Work modes
Simple to use course knob with mechanical detent
Multi-station capability with security station lock
Automatic trim
Adjustable yaw, turn rate and rudder settings
PORT and STBD dodge buttons for collision avoidance
Output for optional analog rudder angle indicator, up to 4 stations
Fully compatible with onboard NMEA instruments and most steering systems
Specifications:
Operating Voltage: 10 to 30 VDC
Power Consumption: Average 0.5 Amps, 3 Amps Peak (Lower consumption capability with low backlight setting) Drive Output: 20 Amps
Network: NMEA 2000
Navigational Interface: NMEA 0183 inputs
NMEA 0183 Output: Heading (10x per sec), Autopilot Status (1x per sec)
Heading Reference: Fluxgate, Magnetic Compass, NMEA Compass or Heading Sensor GNSS compass
Course Resolution: 1°
Course Detection: 0.5°
Control Head: Sunlight viewable high contrast LCD is 5.7” TFT LCD 640 x 480 VGA high resolution display
|
3924.04 |
|
|
SnapIt! Marine P001KR Pontoon Boat Single Drink Holder
Single Drink Holder sized to fit can drinks with insulated sleeves and many mugs. I.D. 3.625” Overall Height 3.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
23.00 |
|
|
SnapIt! Marine P004CR Small Convertible 2 in 1 Drink Holder
This is sized to fit can drinks or 20 oz plastic soft drink bottles. Space saving unit conveniently opens to hold two drinks when needed. I.D. 2.9” Overall Height 4.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
31.00 |
|
|
Single Drink Holder sized to fit can drinks and 20 oz plastic soft drink bottles. I.D. 2.925” Overall Height 3.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
23.00 |
|
|
Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.8”. Cutout on top ring can be useful for hanging sunglasses, etc. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
29.00 |
|
|
Convertible 2 in 1 Drink Holder
This is sized to fit can drinks with insulated sleeves. Space saving unit conveniently opens to hold two drinks when needed. I.D. 3.6” Overall Height 4.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
31.00 |
|
|
Large Handheld Electronics Holder. Opening is oval in shape. Interior Dimensions at the widest point are 3.15”x1.8”. Top ring has an additional ¼” clearance for belt clips. Overall Height 4.4”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included.
|
23.00 |
|
|
Small Handheld Electronics Holder. Interior Dimensions at the widest point are 2.3”x1.7”. Overall Height 4.4”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included.
|
21.00 |
|