|
Series 3 Flat Base/Alum Cheek/Delrin Sheave
Delrin™ plain bearing sheave ensures smooth operation and high safe working load. Stainless Steel base distributes loads to a larger surface area.
Specifications:
Sheave Dia. 1-7/16" (37 mm)
Max Line 7/16" (11 m)
Length 2-7/8" (73 mm)
Width 1-3/4" (44 mm)
Height 3/4" (19 mm)
Fasteners (4) #10- RH (5 mm)
C/C 2-3/8" (60 mm)
SWL 1000 lbs. (450 kg)
Weight Alum. 2.5 oz. (71 g)
|
61.76 |
|
|
Series 7 Flat Base/Aluminum Cheek/Delrin Sheave
Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.
Specifications:
Sheave Dia. 2-3/8" (60 mm)
Max. Line 1/2" (13 mm)
Length 4-3/8" (111 mm)
Width 2-3/4" (70 mm)
Height 1" (25 mm)
Fasteners (4) 1/4" RH (6 mm)
C/C 3-5/8" (92 mm)
C/C (wide end) 2" (51mm)
C/C (narrow end) 1-9/16"
SWL 2250 lbs. (1020 kg)
Weight Alum. 9.6 oz. (272 g)
|
109.43 |
|
|
Series 5 Flat Base/Alum Cheek/Delrin Sheave
Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.
Specifications:
Sheave Diameter 2" (51 mm)
Max. Line 7/16" (11 mm)
Length 3-5/8" (92 mm)
Width 2-7/32" (57 mm)
Height 7/8" (22 mm)
Fasteners (4) #10 RH (5 mm)
C/C 3" (76 mm)
SWL 1750 lbs. (795 kg)
Weight 5.9 oz. (167g)
Max. Line 7/16" (11mm)
|
76.08 |
|
|
Series 5 Flat Base Cheek Block - Stainless Steel Cheeks
Series 5 Cheek Block with Stainless Steel cheek. Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.
Specifications:
Sheave Diameter 2" (51 mm)
Max. Line 7/16" (11 mm)
Length 3-5/8" (92 mm)
Width 2-7/32" (57 mm)
Height 7/8" (22 mm)
Fasteners (4) #10 - RH (5 mm)
C/C 3" (76 mm)
SWL 1750 lbs. (795 kg)
Weight 6.9 oz. (196 g)
Max Line 7/16" (11mm)
|
85.92 |
|
|
Stand-Up Swivel with Aluminum Cheeks
Delrin™ sheave ensures smooth operation and high safe working load.
Specifications:
Sheave Dia. 2" (51 mm)
Max Line 7/16" (11 mm)
Diameter includes urethane base 2-7/8" (73 mm)
Height 4-1/32" (103 mm)
H2 2-3/32" (54 mm)
Fastener Size (4), #10 RH (5 mm)
C/C 1-12/31" (36 mm)
SWL 1750 lbs. (790 kg)
Weight Alum. 7.0 oz. (198 g)
#97-48 BACKING PLATE SOLD SEPARATELY
|
159.00 |
|
|
Single Aluminum Block - 51mm Sheave
Single block with anodized aluminum cheeks. Delrin™ sheave ensures smooth operation with high safe working load. Swivel head may be locked in place to avoid twist.
Specifications:
Sheave Dia. 2" (51mm)
Thickness 15/16" (24mm)
Width 2 1/8" (54mm)
Length 4 13/32" (112mm)
SWL 1750 lbs. (795kg)
Weight 5oz. (142g)
Max. Line size 7/16" (11mm)
|
63.74 |
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
Single Stainless Steel Block - 51mm Sheave
Single block with stainless steel cheeks. Delrin™ sheave ensures smooth operation and high safe working load.
Specifications:
Sheave Dia. 2" (51mm)
Thickness 15/16" (24mm)
Width 2 1/8" (54mm)
Length 4 13/32" (112mm)
SWL 1750 lbs. (795kg)
Weight 7.1oz (201g)
Max Line 7/16" (11mm)
|
74.08 |
|
|
Spring Loaded/Lined Slide/Aluminum for 1" T-Track
Delrin™ sheave ensures smooth operation and high safe working load. Anodized aluminum cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment.
Specifications:
Track Size 1" x 1/8" (25 mm x 3 mm)
Max. Boat Length- 27' (8m)
Max. Boat Weight- 5000 lbs. (2270 kgs)
Sail Area- 315 sq. ft (29 m2)
Sheave Diameter 2" (51 mm)
Max Line 7/16" (11 mm)
Length 3" (76 mm)
Width 1-1/4" (31 mm)
Height 4-5/32" (105 mm)
Bearing Height 2-7/32" (56 mm)
SWL 1750 lbs. (795 kg)
Weight 7.0 oz. (198 g)
|
184.27 |
|
|
Series 75 Core Block™ - Single - Aluminum Rope/Wire Sheave
Core Blocks™ are a true all round solution. A tuned 2-stage bearing system provides excellent performance across the full working load range with an integrated thrust bearing feature and the resilience to handle high dynamic or static loads. Acetal sheave, alloy cheeks and stainless fixings complete the durable package. For reliability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.
Universal Bearing
Dynamic and high static load performance
The Ronstan Universal Bearing incorporates our proven 2-stage bearing system
Stage 1 - Under moderate loads, Acetal ball bearings ensure minimum friction.
Stage 2 - Under heavy loads, where deformation of ball bearings alone would result in increased friction, a sliding Acetal bearing on a polished stainless steel race takes over, maintaining low friction performance.
Additionally the ball bearings are configured to act as a thrust bearing between the sheave and cheeks, preventing the sheave from rubbing on the cheeks and causing friction when the line lead in and out of the block isn't perfect. Particularly important for cheek blocks.
Alloy Cheek Plates
Block cheeks are manufactured from the highest quality alloy for maximum strength. Material optimisation and the cut-away design minimises weight and allows easy fresh water rinsing of salt and debris from the bearings. Cheek design has been further styled with flaring at the block throat and reduced gap between the cheek and sheave, minimising rope wear.
Universal head
The head assembly incorporates a brass bearing washer to provide smooth 360™ rotation of the post and shackle. A set screw arrangement allows the head to be locked at 0™ or 90™.
Shackles are high quality forged grade 316 stainless steel.
Features:
Class leading performance and sleek, contemporary styling
Excellent dynamic and high static load performance
Less than half the friction of the nearest competitor
Universal head with full 3-axis articulation
Head posts can be locked at 0 or 90 degrees, by using a 2.5mm Hex/Allen Key
Central hub hole can be used as a becket take-off or tie-up point
Durable alloy Rope/Wire sheave
Applications:
Ideal for mainsheet, halyard and spinnaker sheet applications on boats to 14M (46')
Various control line applications on larger yachts
Aluminium sheave which has a deep groove profile specifically made for use with wire
Materials:
Sheave: U.V. stabilized Acetal
Cheek body: Aluminium Alloy
Ball Bearings: High compression strength carbon black Acetal
Shackle, head post & hub: Grade 316 stainless steel
Specifications:
Sheave Ø: 75mm(3")
Max. Rope Ø: 14mm(9/16")
Max. Cable Ø: 8mm(5/16")
Pin Ø: 8mm(5/16")
M.W.L.: 1,500kg(3,300lbs)
B. L.: 3,000kg(6,600lbs)
Weight: 432g(15.3oz)
|
179.33 |
|
|
Spring Loaded/Lined Slide/Aluminum for 1-1/4" T-Track
Delrin™ sheave ensures smooth operation and high safe working load. Anodized aluminum cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment.
Specifications:
Track Size 1-1/4" x 3/16" (32 mm x 5 mm)
Max. Boat Length 33' (10 m)
Max. Boat Weight 12000 lbs. (5455 kg)
Max. Sail Area 520 sq. ft. (48 m2)
Sheave Diameter 2-3/8" (60 mm)
Max Line 1/2" (12 mm)
Length 4" (102 mm)
Width 1-9/16" (39 mm)
Height 4-15/16" (126 mm)
Bearing Height 2-3/8" (67 mm)
SWL 2250 lbs. (1020 kg)
Weight 12 oz. (340 g)
|
246.07 |
|
|
Series 40 All Purpose Deck Organizer - 2 Sheave
Features:
Lightweight design with cheek cut outs for easy bearing maintenance
Through hub mounting for maximum strength
All-purpose bearing system provides maximum static load capacity
Mount with 4 x 6mm (1/4”) fasteners, not supplied
Length 116mm (4 9/16")
Deck organizers are an effective means of deflecting halyards and other control lines to winches, stoppers and cleats. Sheaves are made from impact resistant Acetal. The deck organizers have alloy cheeks, flared at rope entry and exit points to minimize chafing. All sizes can be stacked to create double versions - MWL of the top sheaves must not exceed 50% of the total block load rating.
Applications:
Line deflection on larger yachts (depending on load and angle of deflection)
Halyard and control line deflection on boats to 11m (36ft)
Materials:
Cheek plates: Anodized aluminium
U.V. stabilized Acetal sheaves
Grade 316 stainless steel hubs
|
56.00 |
|
|
Single Aluminum Block - 60mm Sheave
Delrin™ sheave ensures smooth operation and a high safe working load. Swivel head may be locked in place to eliminate twisting.
Specifications:
Sheave Diameter 2 3/8" (60mm)
Thickness 1 3/32" (28mm)
Width 2 1/2" (64mm)
Length 5 1/32" (128mm)
SWL 2250 lbs. (1020kg)
Weight 7.4oz (210g)
Max Line size 1/2" (13mm)
|
96.61 |
|
|
The new revamped Signature Series 3 speakers and subwoofers push the boundaries of what is possible on the water even further
delivering Fusion's stunning signature acoustic performance now with premium CRGBW LED lighting for an unparalleled on-water audio entertainment experience.
INDUSTRY-FIRST CRGBW LED LIGHTING ON
MARINE SPEAKERS AND SUBWOOFERS
The new Signature Series 3 sports-style speakers and subwoofers feature industry-first CRGBW (Cool White, Red, Green, Blue, Warm White) LED lighting to illuminate your boat with an unprecedented spectrum of colors – to help set the mood or start the party with premium, more ambient lighting.
Watch the Colors Changing
SIGNATURE SERIES 3 SUBWOOFERS
Truly feel the sound with the enhanced 10” subwoofer. The 10” subwoofer produces a 600-watt peak power, to take your listening experience to the next level with premium low frequencies – allowing you to experience
“The Power Of Music”.
Shop FUSION SIGNATURE SERIES 3 SPEAKERS now at CLR MARINE
|
|
|
Pushing the boundaries of what is possible on the water even further — the new Signature Series 3 Wake Tower speakers deliver stunning Fusion signature performance optimized for wake boat applications. Now with premium CRGBW LED lighting, they bring you an unparalleled on-water audio entertainment experience.
The Signature Series 3 Wake Tower speakers feature industry-first CRGBW LED lighting. With Cool White and Warm White LEDs in addition to standard RGB - you can create a wider range of color blends from premium pastels to vibrant hues with 3 times the industry standard.
Specials Closeouts Remanufactured Rebates
|
|