No. 1073 Bracket Mount This Laketroller comes with a No. 241 Combination Side/Deck Mount, allowing you to mount onto a flat deck surface, side of a gunnel or transom. The mounting option offers 360 degree rotation.  Easy adjust drag brake Stainless steel and nylon construction 100 ft. of 150 lb. Test, Stainless Steel Downrigger Cable 1 ft. per turn of the spool Includes 241 Combination Side/Deck Mount Includes Mini Power Grip Plus Line Release Recommended for use with weights under 4 lbs. Mount Dimensions: 4” x 2” x 2” Bolting Dimensions: 1 5/16” x 3 3/16” WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

No. 1071 Clamp Mount Comes with fully portable anodized aluminum clamp for mounting on the gunnel or transom (2" opening). Great for aluminum boats and canoes WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

367 Universal Fishfinder Mount for Up to 9" Units Features: The Scotty Universal Sounder/Fishfinder Mount uses a new multi pattern universal top plate and the Scotty post mount design for quick removal and adjustable rotation Simply fasten your sounder bracket to the top plate, then lock down the sounder mount into your favorite Scotty post mounting system Only intended for use with Fishfinders and other marine electronics

Bracket Mounting Disks - Quantity 6 An aluminum backing support for a trolling motor mount is a 2-in. diameter disk made of 1/2 in. thick 6061-grade aluminum. The backing support is designed to provide additional reinforcement to the mounting area of the boat where the trolling motor is attached.  Benefits of using mounting disks: Load Distribution: Multiple backing supports can distribute the load over a wider area compared to a single backing plate Flexibility: Using multiple backing supports allows for more flexibility in positioning and alignment Accessibility:  Using multiple backing supports can make it easier to maneuver and install the components in tight spaces, as you can insert them one by one and secure them individually *When using these backing disks, it is important to always have a fender washer between the disk and the lock nut. These disks are designed to work with 1/4-20 Phil flat machine screws. Sea Brackets recommends using machine screws with coarse threads.

RitchieAngler Compass Features: 2 3/4″ (70 mm) Direct-Reading Dial Easily Adjustable Bracket Mount with Thumbscrews No-Glare Gray Finish with High-Visibility Blue Dial Distinctive RitchieAngler graphics Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement Internal Green Night Lighting Built-in Compensators to Easily Adjust for Deviation Movable Sun Shield DirectiveForce Magnets 100% Repairable Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 1lb (454 g) Notes: All magnetic compasses come standard with 12v lighting. 24 & 32v lighting options are available. Some custom built OEM models may have different lighting. 

Engine Cooling Pump - Bracket Mount - 1 1/4" Pump Flow rate: 20 Gallons/min at 1500rpm. Self-priming from dry up to 2.4m (7.8ft) Features: Constructed from marine quality bronze and stainless steel for ruggedness and reliability Easy to service and maintain Body: Bronze Impeller: Neoprene Wearplate: Replaceable Shaft: Stainless steel Shaft Seal: Lip Type Bearings: Twin single row, ball type Port type: 1-1/4" Hose Barb Weight: 7 lb WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Ritchie B-81-WM Voyager Bracket Mount Compass - Wheelmark Approved f/Lifeboat & Rescue Boat Use The Wheelmark approval is for Lifeboat and Rescue boat compasses. These compasses are also suitable for sailboats, power boats and motor sailing vessels. Features: Wheelmark Certification 3" CombiDamp Dial 12V Green LED Lighting Adjustable and Removable with Bracket and Thumbscrews Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement Powerful DirectiveForce Magnets for Fast Heading Lock-on Movable Sun Shield High Temperature Composite Construction for Extended Operating Range 100% Repairable Exclusive 5-Year Ritchie Warranty The WM suffix signifies type approval and compliance with the Navigation requirements of Marine Equipment Directive (MED) 95/98/EC and the last modification by Directive 2011/75/EU.

SCM-SL Series Bracket Mount Spreader Light - White Housing - White The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

SCM-SL Series Bracket Mount Spreader Light - White Housing - White/Blue/Red The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

SCM-SL Series Bracket Mount Spreader Light - White Housing - Full-Color The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

SCM-SL Series Bracket Mount Spreader Light - Black Housing - Full-Color The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch. Features: Soft start technology ramps the brightness up gently over 2 seconds. Power toggle feature to set brightness and change color True white LED for best color performance High-efficiency switch mode power supply Waterproof low-profile aluminum housing White or black finish Unique reflector design to reduce glare Specifications: 1500 lumen output 60-degree beam angle 16-watt power draw 10-30 volts Input 1.4A at 12 volts, 0.7A at 24 volts 6200 Kelvin cool white color temperature 5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth. IP67 waterproof design Durable glass lens The full-color version includes Shadow-NET® interface for controlling color Includes: Spreader light Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version Quick start guide Standard 2 year warranty

Navy Standard Compass - Bracket Mount - Black Navy Standard compasses are professional compasses intended for coastal or worldwide naviagtion. The NS-7.5 has a bracket mount for ship's steering or reference compass. Comes with 12V, 24V/32V, and 110V lights included. The compass dial system features a 7-1/2" (192mm) dial with one degree graduations and cardinal and inner cardinal markings. The dial float chamber removes nearly all the weight from the pivot and jewel. The bezel is machined to accommodate Navy Standard azimuth or bearing circles. The compass meets or exceeds Solas ISO Class A compass requirements. Features: Dial 7.5" (192mm) 1 degree increments with cardinal and inner cardinal markings Dial float chamber removes nearly all the weight from pivot and jewelto extend operation by years Bezel machined to accommodate 7.5" Navy standard azimuth circle orbearing circle Meets or exceeds Solas ISO Class A compass requirements Operating Temperature Range: -22°F (-30°C) to +175°F(+80°C) 12, 24, 32 VDC and 110 VAC lighting included 100% Repairable Exclusive 5-Year Ritchie Warranty Width: 12-1/2" Depth: 11-3/4" Height: 9-3/8" This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Bracket Mount LED Spreader Light - White Scandvik's bracket-mount LED Spreader Light is the perfect solution to illuminate your deck or cockpit. Featuring five daylight white 3W LEDs providing 900 effective lumens, A white Zytel® composite housing was designed specifically for the rigors of the marine environment.  Features: An adjustable stainless steel bracket mounting solution allows the light to be aimed where it is needed most Guaranteed against corrosion, discoloration, and water intrusion Comparable to a 120-watt Halogen bulb. 12/24 volts (8-30 volts) UV-resistant Zytel® Nylon Resin housing Polycarbonate Lens IP68 *The "P" within the part number indicates retail packaging

Compact Bracket Mount LED Spreader Light - White This compact spreader light features 3 each powerful 3W LEDs, comparable to a 75W halogen bulb. Durable Zytel housing is UV resistant and is sure to withstand the elements for many seasons. A stainless steel bracket allows you to direct the light where it is most needed. Features: White housing 12/24 Volt, 5 Watt Polycarbonate Lens 610 Lumens IP67 *The "P" within the part number indicates retail packaging

CPT-S High CHIRP Plastic Thru-Hull Flush Mount Transducer - 12° Angle The CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package.  With a simple design, the CPT-S is easy to install, while still offering excellent performance at speed. This CPT-S is a low profile, flush-mounted plastic Thru Hull High CHIRP transducer  compatible with Raymarine's CP100 sonar module and embedded CHIRP MFD's. This single element conical CHIRP transducer provides a 25 degree fish targeting beam with a maximum depth of 900 feet. This model CPT-S accommodates hulls with a deadrise between 7-17 degrees. Also connects to Axiom Pro S series Units with optional adapter cable A80490. Features: High Chirp Sonar Max Depth: 900' 12 Degree Deadrise