|
4" Gauge Power Socket Adapter Mounting Plate - White
This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.
Features:
Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look
Constructed of UV-resistant injection-molded nylon
Specifications:
Color: White
Face Plate Outer diameter: 3-3/4 in.
Face Plate Inner Diameter: 1-3/16 in.
Face Plate Thickness: 3/16 in.
Height: 3-3/8 in.
Washer Inner Diameter: 1-1/16 in.
Washer Thickness: 1/8 in.
Weight: 0.06
|
7.79 |
|
|
4" Gauge Power Socket Adapter Mounting Plate
This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.
Features:
Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look
Constructed of UV-resistant injection-molded nylon
Specifications:
Color: Black
Face Plate Outer diameter: 3-3/4 in.
Face Plate Inner Diameter: 1-3/16 in.
Face Plate Thickness: 3/16 in.
Height: 3-3/8 in.
Washer Inner Diameter: 1-1/16 in.
Washer Thickness: 1/8 in.
Weight: 0.06
|
7.79 |
|
|
2" Gauge Power Socket Adapter Mounting Plate
This instrument hole adapter is designed to install standard 1-1/8-in. gauges and meters into 2 in. instrument dash panel holes. The socket adapter is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.
Features:
Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look
Constructed of UV-resistant injection-molded nylon
Specifications:
Face Plate Outer diameter: 2-3/16 in.
Face Plate Inner Diameter: 1-3/16 in.
Face Plate Thickness: 3/16 in.
Height: 2 in.
Washer Inner Diameter: 1-1/16 in.
Washer Thickness: 1/8 in.
Weight: 0.04
|
4.40 |
|
|
12V Deluxe Power Socket with Cap
The deluxe flush-mount power socket with a plug adds power virtually anywhere. Installation is as easy as drilling a 1-1/8 in. hole, inserting the socket body, tightening the locking nut, and connecting the wires.
Features:
The plug features a 3-amp fuse and an LED light to indicate when it is powered
Constructed of injection-molded nylon and ABS sockets with stamped brass plug contacts
Specifications:
Maximum: 12VDC, 16A
Diameter: 1-7/16 in.
Height: 1-1/16 in.
Length: 1-9/16 in.
Weight: 0.04 lb.
|
7.45 |
|
|
Double USB & Power Socket Panel with Breaker Switch
This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V–24V. Single output DC 5V/2.4A. Total output is 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. The power socket is rated at a maximum of 12V/16A. Protective dust caps extend the life of the charger. Includes mounting screws and electrical connectors. Includes 16A breaker switch.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.71 |
|
|
Double USB & Power Socket Panel
This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V–24VDC. Single output DC 5V/2.4A. Total output is 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. The power socket is rated at a maximum of 12V/16A. Protective dust caps extend the life of the charger. Includes mounting screws and electrical connectors.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.23 |
|
|
Dual USB Power Socket
This USB power socket charges two devices simultaneously. Input 12V–24V. Total output DC 5V/4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Blue LED illumination. Protective dust cap extends the life of the charger. Fits Sea-Dog® Line standard 1-1/8” Power Socket Shell 426100. IP65 rating.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.84 |
|
|
Single DIN Adapter Mounting Plate
The Fusion Single DIN Adapter Mounting Plate is specifically used for Fusion single DIN series units.
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.41 |
|
|
4° Wedge for Under Vision Mounting Plate
While underway the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 68810 4 degree Wedge for under Vision Mounting Plates the elevated bow will be offset aligning your radar to see better. Edson's 4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount. Order Base Mount and Mounting Plate separately.
Specifications
5.313" x 5.063"
3" Inner Diameter
|
62.70 |
|
|
Round Power Socket/Gauge Mounting Bracket
This round power socket/meter mounting bracket is designed for the external mounting of round power sockets and gauges 1-1/8" in diameter.
Features:
Fits all Sea-Dog® round power sockets, gauges, and meters
Constructed of injection-molded nylon
Installs with two #8 FH fasteners (not included)
|
3.17 |
|
|
12V Chrome Steel Power Socket
The power socket with the plate is ideal for installing additional power outlets.
Features:
Constructed of chrome steel sockets with a stamped 304 stainless steel mounting plate
Installs with two #8 RH fasteners (not included)
Specifications:
Maximum: 12VDC, 16A.
Socket Material: Chrome steel socket and molded cap
Distance Between Mounting Holes: 1-11/16 in.
Height (not including the plate): 1-1/8 in.
Fastener: #8 RH
Weight: 0.12 lb.
|
7.45 |
|
|
12V Stainless Steel Power Socket
The power socket with the plate is ideal for installing additional power outlets.
Features:
Constructed of stainless steel sockets with a stamped 304 stainless steel mounting plate
Installs with two #8 RH fasteners (not included)
Specifications:
Maximum: 12VDC, 16A.
Socket Material: Stainless steel socket and molded cap
Distance Between Mounting Holes: 1-11/16 in.
Height (not including the plate): 1-1/8 in.
Fastener: #8 RH
Weight: .12 lb.
|
14.57 |
|
|
Dual USB Power Plug with Voltage/Amp Meter
LCD screen displays charging status in amps, battery voltage, and low voltage audio alarm. Stamped stainless steel and injection molded nylon construction this USB power plug adapter charges two devices simultaneously. Input 12-24V, Single output DC 5V/2.4A. Total output is a 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Can be used on a boat, car, or RV. This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.56 |
|
|
Screw-Out Deck Plate
The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur.
Center: Clear
Color: White
|
22.02 |
|
|
RayNet to Seatalkhs Socket Adapter Cable
The Raynet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide and E-Classic MFDs to new generation RayNet multifunction displays.
The adapter cable is 15" (400mm) long.
|
76.69 |
|