|
12V Stainless Steel Power Socket
The power socket with the plate is ideal for installing additional power outlets.
Features:
Constructed of stainless steel sockets with a stamped 304 stainless steel mounting plate
Installs with two #8 RH fasteners (not included)
Specifications:
Maximum: 12VDC, 16A.
Socket Material: Stainless steel socket and molded cap
Distance Between Mounting Holes: 1-11/16 in.
Height (not including the plate): 1-1/8 in.
Fastener: #8 RH
Weight: .12 lb.
|
14.57 |
|
|
12V Chrome Steel Power Socket
The power socket with the plate is ideal for installing additional power outlets.
Features:
Constructed of chrome steel sockets with a stamped 304 stainless steel mounting plate
Installs with two #8 RH fasteners (not included)
Specifications:
Maximum: 12VDC, 16A.
Socket Material: Chrome steel socket and molded cap
Distance Between Mounting Holes: 1-11/16 in.
Height (not including the plate): 1-1/8 in.
Fastener: #8 RH
Weight: 0.12 lb.
|
7.45 |
|
|
Dual USB-C Power Socket
A dual USB-C Power Socket charges two devices simultaneously. The total output 8A load is split 4A per side as needed. USB-C features Power Delivery (PD) for faster and more flexible charging. Enough power to charge phones, pads, and tablets quickly and efficiently. A protective dust cap extends the life of the charger.
Features:
Constructed of injection molded nylon
Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires
Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105)
Blue LED illumination
IP65 rating
CE and RoHS compliant
Specifications:
Output DC: 5V/8A
Input: 8-32VDC
USB-C Watts: 60W@24V
Plug-In Side Diameter: (inch) 1-7/16"
Length: (inch) 2-1/4"
*Sold as an Individual
|
49.14 |
|
|
Back Nut Mount Power Socket
This SAE-type polarized electrical connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. Installation is as easy as drilling a 7/8” hole, inserting the socket body, tightening the locking nut, and connecting the wires.
Features:
14-gauge duplex wire
Specifications:
Length: 5 in.
Volts: 12-24
Maximum Amps: 20A @ 12VDC
Wire Guage: 14 AWM
Weight: 0.13 lb.
|
9.49 |
|
|
MaxBlast Stainless Steel Trumpet 12V Horn - Single
MaxBlast Single Trumpet Air Horn is constructed of durable stainless steel. When installed, the trumpet should point slightly downward to permit water drainage.
Specifications:
Stainless Steel
Single
12V
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
73.04 |
|
|
MaxBlast Stainless Steel Trumpet 12V Horn - Dual
MaxBlast Dual Trumpet Horn is constructed of durable stainless steel. When installed, the trumpet should point slightly downward to permit water drainage.
Specifications:
Stainless Steel
Dual
12V
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
142.91 |
|
|
Aurora Stainless Steel LED Pop-Up Table Light - 3W with Touch Dimmer Switch
Aurora LED Pop-Up Table Light automatically switches on with a simple twist of the cap, allowing the light to pop-up, ready to use. Push the cap down, twist to lock, and the light switches off and disappears into the table or deck. Can be used with LED Touch Dimmer Switch (403061-1). Constructed of corrosion resistant investment cast 316 stainless steel cap and bezel. Installs with #10 FH fasteners (included). Produces 500 lumens. 12-24V. IP67 waterproof rating.
Features:
Investment Cast 316 Stainless Steel/ABS
LED Touch Dimmer Switch
This LED Continuous Adjustment Dimmer without On/Off Function is designed to work with lights that are internally switched. Ideal for Aurora Pop-Up Light (404610-3). A center touch sensor activates the color-coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant 304 stainless steel. 1.5A max. 12/24VDC. IP67 waterproof rating.
Features:
304 Stainless Steel
|
187.20 |
|
|
Stainless Cast Steel Flush Mount Rod Holder with Cap - 30°
The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).
|
49.14 |
|
|
Cast Stainless Steel Handle/Latch - 3-3/4" x 3"
The Hatch Handle Latches feature a handle that pivots out to open hatches and lays flush when not in use for a clean appearance. Ideal for use on doors, hatches, lazarettes, and dock boxes. Adjustable locking arm adds additional security. Once installed, the locking arm can be trimmed to length. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four #8 FH fasteners (not included).
|
57.07 |
|
|
1-Mile Deck Mount, Green Sidelight - 12V - Stainless Steel Housing
Part #: 66319G7
Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Each light provides 1-mile, 112.5 degree light visibility.
Features:
7" Wire Lead
12V
Stainless Steel Housing
Green
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.60 |
|
|
SPT2010 Base Wedge for Stainless Steel PowerTower® - 4°
Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.
Compatible with:
Stainless Steel Aft leaning PowerTower®
Features:
Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge
4° Base Wedge for mounting under PowerTower®
A tough, marine-grade, UV stable wedge
Compatible with radomes from most radar manufacturers
Technical Specifications:
Material - Marine grade Polymer
Dimensions (L x W) - 8.07" x 8.07"
Degree of angle - 4°
In the Box:
Wedge
Wedge base
Instruction manual
*Sold as an Individual
|
104.63 |
|
|
1-Mile Deck Mount, Bi-Color Red/Green Combo Sidelight - 12V - Stainless Steel Housing
Part #: 66318-7
Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Provides 1-mile, 225 degree light visibility.
Features:
1-Mile
Bi-Color Red/Green Combination
225 Degree
Stainless Steel Housing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
30.28 |
|
|
1-Mile Deck Mount, Red Sidelight - 12V - Stainless Steel Housing
Part #: 66319R7
Constructed of corrosion-resistant 304 stainless steel, these lights provide one-mile visibility for power boats up to 39.4 ft. (12 meters). Lights include rubber gasket lens seals for enhanced internal corrosion-resistance. Includes one 7.5 watt lamp. For connection to 12 VDC power supply. Installs with three #6 mounting fasteners (not included) . Each light provides 1-mile, 112.5 degree light visibility.
Features:
Red
1-Mile
Stainless Steel Housing
112.5 Degree
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.60 |
|
|
5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G Radar
Includes ADA-R1 modular top plate.
Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel.
This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
465.60 |
|
|
SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning
The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO20, HALO20+, HALO24 radars
Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars
Humminbird - HB2124 CHIRP radar
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Nobletec - 4KW radars
Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars
Sitex - RADARpc-4D
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Stainless Steel
Range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Stainless Steel
Height - 6" (152mm)
Mounting Type - Aft leaning - 25°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
384.07 |
|