|
Tiller Lock Gun - Grey
This tiller lock maintains the rugged reliability of the original and brings the design fully up to date.
Design suitable for any tiller-steered yacht or sports boat
A simple mechanism allows the tiller to be set and adjusted, which is indispensable for short-handed sailing
The innovative design incorporates a snubber, which holds a far better course than simply lashing the tiller
A variety of methods for fixing or locking the tiller have been used over the years, and many have only been adequate. Improvements in performance involving short keels and dagger rudders are often transom-hung and suffer from an unfortunate handicap. With no skeg and no shelf, but with a sensitive rudder, a boat will fall off her elegant balancing act if the helmsman lets go of the tiller. The increased sensitivity and faster response of newer boat designs call for a better system. Such a system should:
1. Allow precise locking of the tiller with minimum difficulty.
2. Be quick and simple to operate when locking and particularly when releasing.
3. If possible, the system should be able to be detached instantly from the tiller in the event of any emergency.
This Tiller Lock rope lock was designed to meet these points. The device consists of a sheave and lever cam with a toothed slider mounted in a block that is fitted beneath the tiller. The rope is fitted across the back part of the cockpit as a means of keeping it under tension. When locked onto the rope, the toothed slider prevents the tiller from moving in either direction.
Features:
Releasing the lock (by turning the lever to port) immediately frees the tiller and allows the rope to ride freely over the sheave for manual steering
In an emergency or when the device is not required, the rope can easily be snapped out of the block by a downward pull, clearing the tiller
Specifications:
Weight: 0.2kg
Color: Grey
|
65.52 |
|
|
Tiller Lock Box
This inexpensive product turns any boat with a ball-grip Forespar® tiller extension into a boat with a simple, effective and adjustable tiller lock. Install one into your cockpit coaming and you have it in minutes.
Cut-out dimensions: 3-3/8”w X 4-3/4”h X 1-1/2”d.
|
47.18 |
|
|
SX 9.5 x 10 Smart Tabs 13-15' Boats with 30lb Actuators - 30-40HP - Gunmetal Grey
The SX series incorporates all of the fully automatic features of the popular Smart Tabs, in addition to the rust and corrosion-free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only tools required are a drill with a 3/16" bit and a Phillips screwdriver. Smart Tabs SX provides un-equaled performance and durability with no maintenance in fresh or saltwater. The system can be specifically tuned to maximize the performance of any powerboat, and Tracking Ribs have been added to improve handling at higher speeds.
Smart Tabs are a one-of-a-kind trim and stabilizer system that automatically adjusts to the sea conditions, without the need for expensive electric or hydraulic hardware and switches. The system constantly reacts to the water conditions, boat speed, and balance providing a remarkable improvement on any boat.
Performance Benefits:
Smoother and Faster Acceleration - Great for Skiing
40% less Bow Rise and 35% Lower On Plane Speed - Great for Tubing
More Top Speed and No Porpoising or Chine Walking
Improves Handling and Smoother Ride In Any Water
Improved Fuel Economy (11% +)
Assembly & Installation In Minutes:
Complete assembly and mounting requires only a drill, a 3/16" bit, and a Phillips screwdriver
The Integral design eliminates the need for wrenches
All components "lock" together with self-locking clevis pins
|
123.06 |
|
|
SX 9.5 x 10 Smart Tabs 12-16' Boats with 40lb Actuators - 40-80HP - Gunmetal Grey
The SX series incorporates all of the fully automatic features of the popular Smart Tabs, in addition to the rust and corrosion-free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only tools required are a drill with a 3/16" bit and a Phillips screwdriver. Smart Tabs SX provides un-equaled performance and durability with no maintenance in fresh or saltwater. The system can be specifically tuned to maximize the performance of any powerboat, and Tracking Ribs have been added to improve handling at higher speeds.
Smart Tabs are a one-of-a-kind trim and stabilizer system that automatically adjusts to the sea conditions, without the need for expensive electric or hydraulic hardware and switches. The system constantly reacts to the water conditions, boat speed, and balance providing a remarkable improvement on any boat.
Performance Benefits:
Smoother and Faster Acceleration - Great for Skiing
40% less Bow Rise and 35% Lower On Plane Speed - Great for Tubing
More Top Speed and No Porpoising or Chine Walking
Improves Handling and Smoother Ride In Any Water
Improved Fuel Economy (11% +)
Assembly & Installation In Minutes:
Complete assembly and mounting requires only a drill, a 3/16" bit, and a Phillips screwdriver
The Integral design eliminates the need for wrenches
All components "lock" together with self-locking clevis pins
|
123.06 |
|
|
SX 9.5 x 10 Smart Tabs 18-22' Boats with 80lb Actuators - 150-240HP - Gunmetal Grey
The SX series incorporates all of the fully automatic features of the popular Smart Tabs, in addition to the rust and corrosion-free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only tools required are a drill with a 3/16" bit and a Phillips screwdriver. Smart Tabs SX provides un-equaled performance and durability with no maintenance in fresh or saltwater. The system can be specifically tuned to maximize the performance of any powerboat, and Tracking Ribs have been added to improve handling at higher speeds.
Smart Tabs are a one-of-a-kind trim and stabilizer system that automatically adjusts to the sea conditions, without the need for expensive electric or hydraulic hardware and switches. The system constantly reacts to the water conditions, boat speed, and balance providing a remarkable improvement on any boat.
Performance Benefits:
Smoother and Faster Acceleration - Great for Skiing
40% less Bow Rise and 35% Lower On Plane Speed - Great for Tubing
More Top Speed and No Porpoising or Chine Walking
Improves Handling and Smoother Ride In Any Water
Improved Fuel Economy (11% +)
Assembly & Installation In Minutes:
Complete assembly and mounting requires only a drill, a 3/16" bit, and a Phillips screwdriver
The Integral design eliminates the need for wrenches
All components "lock" together with self-locking clevis pins
|
123.06 |
|
|
SX 9.5 x 10 Smart Tabs 16-18' Boats with 60lb Actuators - 60-150HP - Gunmetal Grey
The SX series incorporates all of the fully automatic features of the popular Smart Tabs, in addition to the rust and corrosion-free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only tools required are a drill with a 3/16" bit and a Phillips screwdriver. Smart Tabs SX provides un-equaled performance and durability with no maintenance in fresh or saltwater. The system can be specifically tuned to maximize the performance of any powerboat, and Tracking Ribs have been added to improve handling at higher speeds.
Smart Tabs are a one-of-a-kind trim and stabilizer system that automatically adjusts to the sea conditions, without the need for expensive electric or hydraulic hardware and switches. The system constantly reacts to the water conditions, boat speed, and balance providing a remarkable improvement on any boat.
Performance Benefits:
Smoother and Faster Acceleration - Great for Skiing
40% less Bow Rise and 35% Lower On Plane Speed - Great for Tubing
More Top Speed and No Porpoising or Chine Walking
Improves Handling and Smoother Ride In Any Water
Improved Fuel Economy (11% +)
Assembly & Installation In Minutes:
Complete assembly and mounting requires only a drill, a 3/16" bit, and a Phillips screwdriver
The Integral design eliminates the need for wrenches
All components "lock" together with self-locking clevis pins
|
123.06 |
|
|
0343 Locking Gunnel Track Mount
Purpose-built for boats with integrated gunnel tracks, the 343 securely attaches to your vessel without the need to drill holes, or carry tools.
This simple, intuitive design allows you to quickly add, remove, or re-position the mount anywhere on the boat, from bow to stern. A dependable lock to keep gear solidly in place, and a push-button release make changes and removal fast and easy.
Compatible with all of your favorite post mount Scotty accessories. Scotty, the way to fish®.
Features:
Easy-grip T-knob design
Side post mount
Deck post mount
Engineering grade fiber reinforced nylon
Stainless Steel carriage and T-Style bolts included
No tools or drilling holes required
Locking mount with push-button release
*Sold as an Individual
|
23.93 |
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Hatch Lock
Used to secure the sliding hatch to the washboards, this hatch lock can be operated from the cabin or the cockpit. Provision for a padlock.
Features:
Suitable for washboards up to 19mm thick
The Only RORC-certified hatch lock
Specifications:
Weight: 0.2kg
|
164.89 |
|
|
Ram Pin-Lock™ Security Kit f/ 1.5" C Size Mounts and Gimbal Brackets
The RAP-S-KNOB5-GU includes Pin-Lock™ security knobs/keys for 1.5" dia. double socket arms and Gimbal brackets. The RAP-S-KNOB5-GU offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOB5-GU is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price.
The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM®mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.
|
20.74 |
|
|
RAM Mixed Combination Pin-Lock™ Security Kit for Single Swing Arm Mounts and Gimbal Brackets
The RAP-S-KNOBG-109U includes Pin-Lock™ security knobs/keys for single swing arms and Gimbal brackets. The RAP-S-KNOBG-109U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOBG-109U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price.
The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM®mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.
|
31.43 |
|
|
RAM® Pin-Lock™ Security Kit for Single Swing Arms & Gimbal Brackets
The RAP-S-KNOBG-109U includes Pin-Lock™ security knobs/keys for single swing arms and Gimbal brackets. The RAP-S-KNOBG-109U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOBG-109U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price.
The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM® mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.
Hardware Included:
(2) RAM Pin-Lock Security Keys
(1) 1.25" Nylon Washer
(1) #10-24 x .72" Threaded Stud Adapter
(1) 5/16"-18 x 1.06" Threaded Stud Adapter
(1) 1/4"-20 x 1.34" Threaded Stud Adapter
(1) M5-.8 x 12mm Threaded Stud Adapter
(1) M6-1 x 16mm Threaded Stud Adapter
(1) M8-1.25 x 21mm Threaded Stud Adapter
(4) .72" Nylon Washers
(1) .77" Nylon Washer
|
29.47 |
|
|
Single Locking Flush Deck Socket w/LeveLock Mount & Flange
This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all angle adjustable locking mount, a push button locking pin and a flange gasket with the integral flip-up water seal cap.
Compatible With:
Magma Rectangular Grills and Single Mount Tables
Technical Specifications:
Material - 18-8 Stainless Steel and 356 Anodized Aluminum
Dimensions (W x H) - 2-5/8" x 6-1/16" (6.7 x 15.5 cm)
Weight - 1.22 lb (.56 kg)
*Sold as an Individual
|
54.00 |
|
|
Single Locking Surface Socket with LeveLock® Mount
This 18-8 mirror polished stainless steel and hard anodized aluminum mount features Magma's LeveLock all-angle adjustable locking mount, a push-button locking pin, and a water drainage hole in the side of the socket.
Technical Specifications:
Material - 18-8 Mirror polished Stainless Steel
Dimensions at base (H x W) - 6-1/8" x 2-3/8" (15.6 x 6 cm)
Weight - 1.22lb (.56 kg)
*Sold as an Individual
|
54.00 |
|