Flat Foot Recessed Tray for Wireless Foot Pedals - Minn Kota or MotorGuide This low profile recessed pan is specifically designed for the Minn Kota and MotorGuide Wireless Foot Pedal Control. It is made of durable 1/8" aluminum with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.  Inside measurements: 15-1/4"L X 11-3/4"W X 1-5/8"H.

Flat Foot Recessed Tray for Minn Kota Foot Pedals This recessed tray for your foot petal control reduces back pain due to better posture.  It also increases safety due to less obstacles to trip over.  Durable 1/8" aluminum tray with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.

Flat Foot Recessed Tray for MotorGuide Foot Pedals This recessed tray for your foot petal control reduces back pain due to better posture.  It also increases safety due to less obstacles to trip over.  Durable 1/8" aluminum tray with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions.

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 8"-12" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

G-Force ELIMINATOR Trolling Motor Black Prop Nut f/Minn Kota 80-101-112 Trolling Motor One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life. Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 80-101-112 Trolling Motor One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life. Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 80-101-112 Trolling Motor One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life. Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Red Prop Nut for Minn Kota 80-101-112 Trolling Motor One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life. Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling Motor One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life. Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 35-70 Trolling Motor One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life. Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling Motor One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life. Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

  Double Down! 2019 Minn Kota Talon Promotion   To receive your rebate, purchase (2) two qualifying Minn Kota Talon 12' or 15' models now until June 30th, 2019. Receive up to $500 by submitting online only.  Don't miss out on this fantastic offer!   Offer valid now until June 30th, 2019.     Save $500 on Two Minn Kota Talon   It's the only shallow water anchor that goes down to 15' deep. The only one you can control from anywhere on the boat. And the only one with User-Selectable Anchoring Modes that let you anchor in anything. When it comes to dominating shallow water, Talon is the only name you need to know.   Offer valid now until June 30th, 2019.         Specials    Closeouts   Remanufactured    Rebates  

PowerDrive™ 55 Trolling Motor with Foot Pedal - 12V - 55LB - 54" Reliable. Capable. And fully able to handle anything a day of fishing brings. PowerDrive™ shows up at the launch ramp every day with big-time technology, trusted power, and easy operation. Also, comes with a mount that's tough, sleek, and built to take a beating, it's going to keep showing up day after day. Deploy-Assist Lever Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely. Side-To-Side/Electric Foot Pedal Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Note: the foot pedal is not included with GPS-enabled models. Push-to-Test Battery Meter Press a button to get an instant "stage of charge" reading. Digital Maximizer™ Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing. Power Prop Delivers extra power to push through any fishing scenario and excels in open water. Indestructible Composite Shaft — Guaranteed for Life At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life. Cool, Quiet Power Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet. What's Included PowerDrive 55 lb. 54" Motor, Corded Foot Pedal, MKP-37 Prop and Mounting Hardware Specifications: For Use In: Freshwater Shaft Length (inch): 54" Max Thrust (pounds): 55 lbs. Voltage: 12 One-Boat Network Compatible: No QUEST Series: No Spot-Lock: No Built-In Sonar: None Foot Pedal Style: Side-to-Side / Electric Control: Foot Pedal Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: No i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 50 Mount Style: Bolt-on Mounting Location: Bow-mount  Motor Style: Electric-steer Prop: Power Prop (MKP-37) Warranty: Two-Year Warranty

PowerDrive™ 70 Trolling Motor with Foot Pedal - 24V - 70LB - 60" Reliable. Capable. And fully able to handle anything a day of fishing brings. PowerDrive™ shows up at the launch ramp every day with big-time technology, trusted power, and easy operation. Also, comes with a mount that's tough, sleek, and built to take a beating, it's going to keep showing up day after day. Deploy-Assist Lever Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely. Side-To-Side/Electric Foot Pedal Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Note: the foot pedal is not included with GPS-enabled models. Push-to-Test Battery Meter Press a button to get an instant "stage of charge" reading. Digital Maximizer™ Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing. Power Prop Delivers extra power to push through any fishing scenario and excels in open water. Indestructible Composite Shaft — Guaranteed for Life At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life. Cool, Quiet Power Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet. What's Included PowerDrive 70 lb. 60" Motor, Corded Foot Pedal, MKP-37 Prop and Mounting Hardware Specifications: For Use In: Freshwater Shaft Length (inch): 60" Max Thrust (pounds): 24 lbs. Voltage: 24 One-Boat Network Compatible: No QUEST Series: No Spot-Lock: No Built-In Sonar: None Foot Pedal Style: Side-to-Side / Electric Control: Foot Pedal Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: No i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 42 Mount Style: Bolt-on Mounting Location: Bow-mount  Motor Style: Electric-steer Prop: Power Prop (MKP-37) Warranty: Two-Year Warranty