|
Trolling Motor Saver Set for Deep V Boats
Specially designed for deep "V" boats with extra long trolling motor shafts. Designed with two straps, the longer strap is mounted where the trolling motor shaft fastens to the mounting bracket and can mount 24" above the deck. The second strap is designed to hold down the actual motor. It wraps around the entire mounting bracket, and the trolling motor shaft, helping to keep the motor from bouncing when traveling down the lake. Keep your trolling motor tied down securely and undamaged for longer life.
Adjustable 9" to 24".
|
19.69 |
|
|
Trolling Motor Saver Set for Bass Boats
A must for every trolling motor. Keeps motor firmly mounted to the boat, and more importantly it keeps the trolling motor secure with less bouncing when traveling down the lake.
Adjustable 9" to 18"
|
16.07 |
|
|
Trolling Motor Propeller Cover
The cover keeps the trolling motor and prop from cutting a hole in your boat tarp during transport. This complete cover protects the motor as well as the tarp. There is an additional webbing liner inside the cover for increased protection from the trolling motor prop. The cover will fit up to a 12" trolling motor prop and is 19" in length. It is also designed for the trolling motor prop to be positioned on the inside of the boat vs. the outside.
|
94.50 |
|
|
Trolling Motor Mount f/GT36 and GT56
Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.
|
22.49 |
|
|
XTM 9 20 MSI T Trolling Motor Transducer f/MEGA Units
MEGA SI, MEGA DI, DualBeam PLUS, 20/60/86/55 degrees, 200/83/455/800 kHz and 1.2 MHz, temperature built-in trolling motor transducer.
For HELIX MEGA Side Imaging units only.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
357.41 |
|
|
Ghost® Trolling Motor - 52"
Quiet by Name. Powerful by Design. Fish longer, run faster and move in closer to the fish with the rugged, reliable and ultra-quiet Lowrance Ghost 52- and 60-inch Trolling Motors. These new sized freshwater trolling motors are designed for larger bass and walleye type boats with higher bows. Never spook another fish with the Ghost’s powerful brushless motor with the most thrust and longest run time of any trolling motor on the market. Ghost delivers 25-percent more power and 60-percent greater efficiency, allowing you to silently cover more water, easily anchor when and where you want – even in strong winds – and stay on the water longer without draining your battery. With integrated Lowrance sonar options, waypoint anchoring and a three-year warranty, Ghost trolling motors are the new standard for anglers looking to upgrade their trolling motor.
Reliability
We put our 60-plus years of innovation and marine electronics expertise to work in designing the Lowrance Ghost freshwater trolling motor. After years of researching when and why trolling motors fail, we went to work to exceed those standards, building Ghost in-house, from scratch. Four years and 10,000 testing hours later, we have delivered the quietest, most reliable, and most powerful trolling motor on the market.
Silent Operation
So silent, you’ll wonder if it’s running, Ghost allows you to move in closer than ever before with its ultra-quiet brushless motor. Fish will never hear you coming.
Incredible Performance
Zoom from spot to spot or zip across the cove with up to 25-percent more thrust than competing models. Ghost’s brushless motor also delivers 60-percent better run-time efficiency, so you can enjoy the best top-end speed and acceleration without sacrificing battery life. Stay out later and run it harder – you will fish longer with Ghost.
Own Your Spot
Ghost’s powerful and precise anchoring lets you anchor your boat on a waypoint, at your current location or anywhere on the map – regardless of wind conditions – so you can spend more time fishing and less time maintaining your position. With a simple press of your foot, you can lower or raise your Power-Pole® shallow-water anchor or anchor at your current location using the quick access keys built into the Ghost foot pedal.
Total Integration
Steer your boat, adjust your speed, set up route navigation or anchor at your current location with full touchscreen control from HDS LIVE, HDS Carbon and Elite Ti2 displays. Our Pro Team anglers asked us to build a trolling motor with full integration capability, including a foot pedal that could serve as an extension of the display’s user interface. We listened – delivering an all-everything pedal with easily accessible Anchor and Heading Mode quick access keys, plus programmable shortcut keys that can be used for saving waypoints and controlling Power-Pole shallow water anchors.
Plug-and-play Lowrance Sonar
Ghost is packaged with an HDI nosecone transducer, giving you the high-level performance of Lowrance CHIRP sonar and DownScan Imaging™ right out of the box. Anglers who want to step up to the extreme, high-resolution views beneath and to the sides of the boat can add an optional Active Imaging™ 3-in-1 nosecone with Lowrance CHIRP, SideScan and DownScan Imaging.
Fly-By-Wire Steering
Instant and smooth fly-by-wire steering control gives Ghost the feel of a traditional cable-steer motor, but without the physical cables that wear out over time.
Configurable Foot-pedal
Configure the Ghost pedal to suit your preferences via programmable shortcut buttons and a Flip Switch that allows the trolling motor to be driven from either side of the pedal. The foot pedal features a battery-level indicator, Anchor and Heading mode quick access keys with LED lights and an indicator beep to provide feedback when a mode is engaged. You can program the shortcut keys to quickly drop a waypoint or lower/raise your Power-Pole shallow-water anchor.
Interference Free
Ghost’s brushless motor not only runs quieter than common brushed motors, but emits zero electromagnetic interference, ensuring the clearest, interference-free sonar views on your fish finder display.
Flexible Installation
The Ghost trolling motor is designed to work with either 24- or 36-Volt systems, making it compatible with any set-up and easier to implement future upgrades to batteries and chargers.
360-Degree Breakaway Mount
The 360-degree breakaway mount is designed to absorb impact, allowing the shaft to deflect away from obstructions and then reposition itself after impact. An integrated stabilizer bar reduces bouncing when running in rough water.
TMR-1 Remote
Set anchor and control the speed and direction of the Lowrance® Ghost trolling motor from anywhere on your boat with the lightweight and easy-to-use TMR remote control.
Easy to Stow and Go
Ghost has a dual-action gas spring that makes stowing and deploying the motor easier and quieter. Plus, there is no longer a need to align the lower unit before stowing the motor as Ghost auto aligns itself when stowing to lay flat and secure on the mount.
Features:
Perfect for bigger bass and walleye boats with higher bows
Available with 52- and 60-inch shafts
Reliable
Silent operation with fastest top-end speed
Fly-By-Wire Steering
Plug-and-play Lowrance sonar
Configurable foot-pedal
Interference free
Total integration with HDS® LIVE, HDS CARBON® and ELITE™ Ti2
Flexible installation
360° Breakaway Mount
Easy to stow and go
Trolling Motor Remote (TMR-1) optional for Ghost 52
What's in the Box?
Trolling Motor Compass-1 (TMC-1)
N2K-T-RD Network T-Connector
Sonar Adapter CAble 9P Mini to 9P
HDI Nosecone Transducer for Ghost Trolling Motor
|
3903.90 |
|
|
Ghost® Trolling Motor with TMR-1 Remote - 60"
Quiet by Name. Powerful by Design. Fish longer, run faster and move in closer to the fish with the rugged, reliable and ultra-quiet Lowrance Ghost 52- and 60-inch Trolling Motors. These new sized freshwater trolling motors are designed for larger bass and walleye type boats with higher bows. Never spook another fish with the Ghost’s powerful brushless motor with the most thrust and longest run time of any trolling motor on the market. Ghost delivers 25-percent more power and 60-percent greater efficiency, allowing you to silently cover more water, easily anchor when and where you want – even in strong winds – and stay on the water longer without draining your battery. With integrated Lowrance sonar options, waypoint anchoring and a three-year warranty, Ghost trolling motors are the new standard for anglers looking to upgrade their trolling motor.
Reliability
We put our 60-plus years of innovation and marine electronics expertise to work in designing the Lowrance Ghost freshwater trolling motor. After years of researching when and why trolling motors fail, we went to work to exceed those standards, building Ghost in-house, from scratch. Four years and 10,000 testing hours later, we have delivered the quietest, most reliable, and most powerful trolling motor on the market.
Silent Operation
So silent, you’ll wonder if it’s running, Ghost allows you to move in closer than ever before with its ultra-quiet brushless motor. Fish will never hear you coming.
Incredible Performance
Zoom from spot to spot or zip across the cove with up to 25-percent more thrust than competing models. Ghost’s brushless motor also delivers 60-percent better run-time efficiency, so you can enjoy the best top-end speed and acceleration without sacrificing battery life. Stay out later and run it harder – you will fish longer with Ghost.
Own Your Spot
Ghost’s powerful and precise anchoring lets you anchor your boat on a waypoint, at your current location or anywhere on the map – regardless of wind conditions – so you can spend more time fishing and less time maintaining your position. With a simple press of your foot, you can lower or raise your Power-Pole® shallow-water anchor or anchor at your current location using the quick access keys built into the Ghost foot pedal.
Total Integration
Steer your boat, adjust your speed, set up route navigation or anchor at your current location with full touchscreen control from HDS LIVE, HDS Carbon and Elite Ti2 displays. Our Pro Team anglers asked us to build a trolling motor with full integration capability, including a foot pedal that could serve as an extension of the display’s user interface. We listened – delivering an all-everything pedal with easily accessible Anchor and Heading Mode quick access keys, plus programmable shortcut keys that can be used for saving waypoints and controlling Power-Pole shallow water anchors.
Plug-and-play Lowrance Sonar
Ghost is packaged with an HDI nosecone transducer, giving you the high-level performance of Lowrance CHIRP sonar and DownScan Imaging™ right out of the box. Anglers who want to step up to the extreme, high-resolution views beneath and to the sides of the boat can add an optional Active Imaging™ 3-in-1 nosecone with Lowrance CHIRP, SideScan and DownScan Imaging.
Fly-By-Wire Steering
Instant and smooth fly-by-wire steering control gives Ghost the feel of a traditional cable-steer motor, but without the physical cables that wear out over time.
Configurable Foot-pedal
Configure the Ghost pedal to suit your preferences via programmable shortcut buttons and a Flip Switch that allows the trolling motor to be driven from either side of the pedal. The foot pedal features a battery-level indicator, Anchor and Heading mode quick access keys with LED lights and an indicator beep to provide feedback when a mode is engaged. You can program the shortcut keys to quickly drop a waypoint or lower/raise your Power-Pole shallow-water anchor.
Interference Free
Ghost’s brushless motor not only runs quieter than common brushed motors, but emits zero electromagnetic interference, ensuring the clearest, interference-free sonar views on your fish finder display.
Flexible Installation
The Ghost trolling motor is designed to work with either 24- or 36-Volt systems, making it compatible with any set-up and easier to implement future upgrades to batteries and chargers.
360-Degree Breakaway Mount
The 360-degree breakaway mount is designed to absorb impact, allowing the shaft to deflect away from obstructions and then reposition itself after impact. An integrated stabilizer bar reduces bouncing when running in rough water.
TMR-1 Remote
Set anchor and control the speed and direction of the Lowrance® Ghost trolling motor from anywhere on your boat with the lightweight and easy-to-use TMR remote control.
Easy to Stow and Go
Ghost has a dual-action gas spring that makes stowing and deploying the motor easier and quieter. Plus, there is no longer a need to align the lower unit before stowing the motor as Ghost auto aligns itself when stowing to lay flat and secure on the mount.
Features:
Perfect for bigger bass and walleye boats with higher bows
Available with 52- and 60-inch shafts
Reliable
Silent operation with fastest top-end speed
Fly-By-Wire Steering
Plug-and-play Lowrance sonar
Configurable foot-pedal
Interference free
Total integration with HDS® LIVE, HDS CARBON® and ELITE™ Ti2
Flexible installation
360° Breakaway Mount
Easy to stow and go
Ghost 60 includes Trolling Motor Remote (TMR-1)
What's in the Box?
Trolling Motor Compass-1 (TMC-1)
N2K-T-RD Network T-Connector
Sonar Adapter CAble 9P Mini to 9P
HDI Nosecone Transducer for Ghost Trolling Motor
TMR-1 Remote
|
4123.90 |
|
|
Replacement Cable for Trolling Motor Pull Rope
Never worry about that trolling motor pull rope breaking again. This stainless steel vinyl coated braided cable is used to replace the manufacturer's pull rope on your trolling motor. This replacement cable will not rust, break or rot. It comes with complete, easy to follow installation instructions. Don't wait for your rope to break, replace it with this durable steel cable now.
|
16.30 |
|
|
Trolling Motor Mount for MK, Garmin, Rhodan, & Power Pole
The Sea Swivel is a heavy-duty marine-grade pivoting bracket designed to maneuver a trolling motor in the correct position while being deployed. This bracket also has the benefit of being able to adjust the stowed position to match the angle of any boat. That means no more anchor hatches covered up and no more trolling motorheads hanging off the side of the boat. All that is needed is an 8" x 8" flat mounting surface and access under the gunwale to tighten the nut. During installation, it is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.
Features:
Maneuverability and Positioning
The Sea Swivel offers a heavy-duty pivoting bracket that allows users to easily maneuver the trolling motor into the correct position while deployed. This is especially useful for maintaining proper control and direction while fishing or navigating in different conditions.
Adjustable Stowed Position
The ability to adjust the stowed position of the trolling motor to match the angle of the boat is a significant advantage. This means that the trolling motor won't interfere with anchor hatches or hang off the side of the boat when not in use, enhancing the boat's aesthetics and functionality.
High-Quality Materials
The use of 7075T6 aluminum alloy, commonly found in the aerospace industry, provides peak strength and ensures the Sea Swivel's durability. This material choice suggests that the product is designed to withstand the rigors of marine environments and provide longevity.
Corrosion Resistance
The anodized finish is designed to protect the Sea Swivel from the harsh marine environment, which typically includes exposure to saltwater and other corrosive elements. This coating enhances the product's ability to resist rust and other forms of corrosion over time.
Stainless Lock Pin and Hardware
The utilization of all 316 stainless lock pins and mounting hardware further enhances the product's resistance to corrosion, as 316 stainless steel is known for its exceptional corrosion resistance properties, making it well-suited for marine applications.
Backing Plate for Strength
The inclusion of a pre-cut backing plate to be placed under the mounting surface is a smart design choice. This additional plate strengthens the installation area, reducing the risk of damage or failure due to stress or strain over time.
Easy Installation
The patent-pending design and single-bolt mounting system contribute to streamlined installation processes. This can be a significant selling point for customers, as it saves time and effort during setup.
*It is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.
Compatibility
The Sea Swivel stands out as a versatile solution seamlessly accommodating many makes, models, and sizes of trolling motors. It makes installation a breeze and comes pre-drilled for the quick-release brackets listed below:
Minn Kota RTA 54/62 (fits all 36V permanent magnet motors)
Minn Kota RTA 55/56 (fits all new Brushless/Quest motors)
Minn Kota RTA17 (fits all 24V motors for smaller units)
Also fits quick-release mounts for the *Garmin Kraken 24v/36v
Rhodan large mount 6 bolt 36v 96/108
Rhodan smaller mount 4 bolt 24v
Power Pole Move PV 36V/24V
Lifetime Warranty
Sea Swivel offers a limited lifetime warranty.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1318.80 |
|
|
Small Offset Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
274.50 |
|
|
Large Offset Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 tapered Phillips machine screws, fender washers, and lock nuts
3/8–16 Flathead Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
405.00 |
|
|
Trolling Motor Bracket
Raymarine's Trolling Motor Bracket is made specifically for Raymarine's Dragonfly Transducer.
|
114.98 |
|
|
16" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
172.50 |
|
|
18" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 18" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
175.50 |
|
|
20" Straight Trolling Motor Plate for Minn Kota’s Quest
The Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Minn Kota’s RTA-55 Quick Release Bracket
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
3/8–16 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
217.50 |
|